Argonne physicists create landmark accelerator gradient

The Argonne Wakefield Accelerator Group (AWA) works on particle accelerators in much the same way that horsepower junkies work on muscle cars. Although their research doesn't involve turbochargers, stall torque converters or cat back exhaust systems, the AWA group obsesses over the power of their machine.

This past spring, Manoel Conde and his colleagues in the AWA group, led by physicist Wei Gai, crossed a major frontier in accelerator science: They generated an accelerating gradient five times stronger than that of conventional linear accelerators. The gradient – a region of increasing electrical potential – works like an electrical "motor," transferring enormous amounts of energy to charged particles as they shoot through an accelerator. By substituting a dielectric ceramic for the copper medium used to support these accelerating electric fields, Conde and his colleagues generated a gradient of 100 MV/m; conventional linear accelerators generally cannot support a gradient above 20 MV/m.

Higher gradients could allow for more compact accelerators with the same or greater energy as today's high-energy accelerators, which often stretch for miles. Aside from extending the energy frontier, materials that can support higher gradients will allow for the miniaturization of the medium- and low-energy accelerators used in hospitals for radiation therapy, improving their accuracy while reducing their cost, Gai said.

High-energy physicists have begun to realize that they cannot continue their decades-long trend of building ever-larger accelerators, said John Power, a physicist in the AWA group. He sees projects like CERN's Large Hadron Collider, with a circumference of about 17 miles, or the proposed 20-to-25-mile-long International Linear Collider (ILC) as the ceiling for traditional accelerators.

"Right now, high-energy physics is building the last set of machines that it can ever build," Power said. "We're pushing conventional technology to the ultimate limit and accelerators are getting to be so long — the only thing left now is to raise the gradient."

Physicists have started to look for ways to make accelerators more powerful. The limiting factor lies in finding a suitable alternative to copper, which provides the foundation for the accelerators that Power called "the workhorses of high-energy physics for 50 years."

Current accelerators typically operate at gradients of approximately 20 MV/m, because subjecting the copper to stronger electric fields produces a phenomenon known as field emission, in which free electrons circulating in the highly conductive metal get pulled out of its surface, generating discharges that can damage the accelerator. At high gradients, copper accelerators also tend to produce high wall currents, which sap energy from the beam, said physicist Zikri Yusof, another member of the AWA group.

Accelerator scientists trying to push copper to its limits were able to increase the gradient to 65 MV/m, above which point the accelerator would suffer irreversible damage due to a combination of these effects, according to Power. However, even at that intensity, the copper became so unstable that the ILC Global Design team decided to abandon the idea of using it as the foundation for their accelerator.

Having seen copper undone by its own electrical conductance at high voltages, Gai and his colleagues turned to dielectrics — or insulating materials — as viable alternatives. "If the dielectrics can support these kinds of gradients, we've got a great shot at a working accelerator," Power said. "The power sources and the size of the supporting structures are the same that accelerator physicists have always used, so everything should work."

Although other scientists have achieved success with other advanced accelerator technologies, from plasma- to laser-based accelerators, Power believes that dielectrics may provide the most pragmatic tool to break down the barrier currently facing high-energy physics. "Other advanced schemes have several major hurdles to cross, and we have only one: This dielectric has to be able to sustain the higher gradients," he said.

While Gai cautioned that other challenges still impede the manufacture of a high-gradient accelerator, he agreed with Power's observation. "This is one of the most promising advanced technologies on the horizon," he said.

Unlike conventional accelerators, which employ only one particle beam, wakefield accelerators use two beams: a “drive beam” to create the high gradient and a “main beam” to be accelerated. Within the drive beam, one or several highly charged "bunches" of electrons are shot through the dielectric structure. Like a speedboat rushing over a lake, each drive bunch leaves behind an electromagnetic wake. The electric gradients produced by these wakes are then used to accelerate the main beam. By synchronizing the emission of each successive drive bunch with the wake's waves, scientists can create stronger wakes that produce higher gradients, Yusof explained.

Although the 100 MV/m figure constitutes a true landmark for accelerator physicists — "it's a milestone we've pursued for 10 years," Power said — dielectrics or similar materials could produce even higher gradients. The absolute upper bound on solid-based accelerators is believed to be about 10 GV/m, at which point all solids will begin to ionize and destabilize. However, that figure represents a 100-fold improvement over the gradients that the scientists on the AWA have generated, leaving considerable room for later improvements.

Power believes that the successful construction of higher-gradient accelerators will precipitate a revolution, as high-energy physicists — the AWA's "primary customers" — will gain access to a whole new regime of energies. "Right now, the 20-mile ILC is expected to give you about half a tera-electronvolt (TeV) of energy. If you take the same 20 miles and apply our technology, you can get 2.5 TeV or perhaps even more. That opens up many different possibilities," he said.

Source: Argonne National Laboratory

Related stories:

New accelerator technique doubles particle energy in just one meter
Imagine a car that accelerates from zero to sixty in 250 feet, and then rockets to 120 miles per hour in just one more inch.
Physicists 'See' Single Top Quarks at the Tevatron
(PhysOrg.com) -- Scientists at the world's largest fully operating particle accelerator, the Tevatron at Fermi National Accelerator Laboratory (Fermilab) in Illinois, have discovered convincing evidence suggesting the existence of top quarks that are not coupled to their antiparticle, the antitop. These "single" top quarks have been hunted since Fermilab scientists first discovered top-antitop pairs in 1995.
Forum features update on next-generation particle accelerator
The particle accelerator known as the Energy Recovery Linac (ERL) -- now in planning stages at Cornell -- would open doors to new research in fields from materials science to biochemistry, said Georg Hoffstaetter in a lecture to faculty and staff in Cornell's Research Division, July 31. But if the ERL's scientific scope is wide, he said, its strength would be in shedding new light on the very, very small.
Brightest X-ray Vision at the Nano-scale
Technology-development studies at Cornell University and Jefferson Laboratory are showing how to use the brightest X-ray light ever generated for the scientific examination of everything from human proteins to forged art.
Nuclear scientists eye future landfall on a second 'island of stability'
Modern-day scientific Magellans and Columbus’s, exploring the uncharted seas at the fringes of the Periodic Table of the Elements, have landed on one long-sought island — the fabled Island of Stability, home of a new genre of superheavy chemical elements sought for more than three decades.
Physicists: After 30 years of study, rare particle confirms prediction
High-energy physicists devoted to recreating the conditions at the beginning of the universe have for the first time observed a new way to produce those basic particles of atoms, protons and neutrons.
A 'Golden Channel' for New Physics
A group of physicists has dubbed a particular particle decay, the decay of the Bs meson into a neutral kaon and neutral antikaon, as a “golden channel” for new physics, suggesting that probing and studying the decay could lead to brand-new insight into the physics laws that govern the tiniest bits of matter. The scientists discuss their ideas, and how this decay could be studied in the future, in the January 25, 2008, edition of Physical Review Letters.
COUPP experiment tightens limits on dark matter
Scientists working on the COUPP experiment at the Department of Energy’s Fermi National Accelerator Laboratory today announced a new development in the quest to observe dark matter. The Chicagoland Observatory for Underground Particle Physics experiment tightened constraints on the “spin-dependent” properties of WIMPS, weakly interacting massive particles that are candidates for dark matter. Their results, combined with the findings of other dark matter searches, contradict the claims for the observation of such particles by the Dark Matter experiment (DAMA) in Italy and further restrict the hunting ground for physicists to track their dark matter quarry.

News discussion:

Physics news