CSIRO scientists have discovered a new process which could soon lead to the production of aluminium cars and planes that get stronger the longer they are left to 'bake' in the sun.
Dr Roger Lumley of CSIRO Elaborately Transformed Metals (CETM) says the new process involves curing, or age-hardening, aluminium to a point where the curing process can be completed by exposure to sunlight rather than in a furnace.
The discovery arises from CSIRO's work in light alloys and advanced metals.
"We found in the course of this work that if the high-temperature aging process used to strengthen aluminium components, such as castings or motor vehicle body panels, is interrupted, and the material is allowed to undergo secondary aging at ambient temperature, the material became 20 per cent tougher," Dr Lumley says.
At the same time, the 'total-energy-to-rupture' point can also be extended dramatically (by up to 800 per cent) resulting in safer cars with crumple zones able to absorb much more energy as they deform or rupture on impact.
"We have developed two heat treatments using our new knowledge both of which overcome the age-old problem of either increasing the strength of aluminium, and reducing its fracture toughness, or vice versa,'' Dr Lumley says.
"Aluminium alloys used in the automotive, building and aerospace industries are typically age-hardened, that is they are strengthened after their initial formation by a curing process, or aged at high temperatures in a large furnace."
This method produces a range of curing times for aluminium alloys. For example the most common treatment, which gives the strongest alloys, is called T6.
To generate the tensile properties required for structural applications T6-treated aluminium alloy is typically aged for 6–8 hours at 150–170°C.
"CSIRO's T6i4 heat treatment significantly reduces the time of high temperature aging to about an hour, and uses Australia's warm climate to complete the process," Dr Lumley says.
"Significantly it means aluminium car body panels, for example, can be assembled and painted, (the baking cycle used to harden the paint adds to the process) and they will continue to strengthen in the sun.
"The process would continue, albeit at a slower rate, for the life of the vehicle," he says.
According to CETM's Industry Manager, Barrie Finnin, even better results can be achieved using CSIRO's T6i6 process, where, after several hours of secondary aging at ambient temperature, the material is again subjected to high temperature aging.
"This can provide significant improvements to mechanical properties over the T6i4 treatment," Mr Finnin says.
"A likely application for our T6i6 process would be for aircraft skins and other aerospace applications, or any application where weight reduction and high strength are paramount."
Both T6i4 and T6i6 offer considerable savings in time and energy over conventional techniques, and in most cases requires no additional equipment.
Dr Lumley says the secret of the CSIRO discovery is all to do with the microstructure of aluminium alloys.
"What you end up with in the new process is a finer structure, engineered at the nano-scale, in a way that translates into mechanical property improvements," he says.
CSIRO says the potential spin-offs of the new processes for industry are enormous. Not only can aluminium alloy producers boost the strength of their product while making considerable energy cost savings, but the processes also allow a faster turnaround time in producing finished components and may even lead to reduced furnace sizes.
The technology, which is protected by a series of international patent applications, is now in the proving-out stage and is being evaluated by Forgecast Australia Pty Ltd – a manufacturer of non-ferrous metal components for global markets with facilities in Mitcham, Victoria and Tijuana, Mexico.
"Commercial applications are starting to build industry confidence in our innovation, which should encourage further use of aluminium alloys," Mr Finnin says.
Forgecast's General Manager, Jim Kealy, says the T6i6 technology could provide a competitive advantage, particularly where the improvement in properties fulfil a specific customer need.
Source of this news:
CSIRO Australia
Related stories:
So-called 'sandfish' could help materials handling and process technology specialists
It moves as quickly in sand as a fish moves through water, which is why this lizard, a species of skink (
Scincus scincus) that grows to about 15 cm long and lives in the deserts of North Africa and the Near East, is commonly known by the name "sandfish."
Technological breakthrough in the fight to cut greenhouse gases
Scientists at Newcastle University have pioneered breakthrough technology in the fight to cut greenhouse gases. The Newcastle University team, led by Michael North, Professor of Organic Chemistry, has developed a highly energy-efficient method of converting waste carbon dioxide (CO
2) into chemical compounds known as cyclic carbonates.
New research brings terahertz closer to everyday use
A collaboration between the Universities of Leeds and Harvard has turned the heat up on terahertz technology, bringing a handheld terahertz device a step closer to reality.
Heat treatment process supplies stronger die cast parts
Car components with doubled mechanical strength, higher fatigue resistance and improved energy absorption are the result of a revolutionary CSIRO heat treatment process for high pressure die casting (HPDC) of aluminium.
Greener extraction of one of nature's whitest minerals
From medicine to make-up, plastics to paper - hardly a day goes by when we don't use titanium dioxide. Now researchers at the University of Leeds have developed a simpler, cheaper and greener method of extracting higher yields of one of this most useful and versatile of minerals.
Rough times: NIST's new approach to surface profiling
Researchers at the National Institute of Standards and Technology have developed a novel technique for measuring the roughness of surfaces that is casting doubt on the accuracy of current procedures. Their results announced in a forthcoming paper could cut development costs for automakers as they design manufacturing tools for new, fuel-efficient, lightweight alloys.
Understanding the origin of rubies and sapphires to improve prospecting strategies
Rubies and sapphires belong to the corundum mineralogical family. Corundums exist in a wide range of colours. They consist of aluminium oxide crystals containing impurities which dote them with their various tints: titanium and iron for the blue of the sapphire, chromium and vanadium for the red of rubies.
Don't judge a brook by its color -- brown waters are more natural
Over the last 20 years lakes and streams in remote parts of the UK, southern Scandinavia and eastern North America have been increasingly stained brown by dissolved organic matter. In this week’s
Nature journal (22 November) an international team, led by researchers from UCL (University College London) and the US Environmental Protection Agency (EPA), demonstrates that the colour change is indicative of a return to a more natural, pre-industrial state following a decline in the level of acid rain.