ASML Holding NV today announced significant progress towards development of both high NA immersion and Extreme Ultra Violet (EUV) lithography technology: two critical elements of the semiconductor industry’s ability to continue its historical trend of packing more power onto silicon chips.
ASML presented the first resist images produced by its TWINSCAN XT:1700i. These breakthrough results are made possible by the combination of a 1.2 numerical aperture (NA) catadioptric lens, polarized illumination and water based immersion technology. The lens is performing well within specification and is now ramping up for production. Qualification of the total system is ongoing and the first tool will be ready for shipment by the end of Q1 2006. ASML has multiple orders for this fourth generation immersion tool and expects to ship between 20 and 25 immersion systems in 2006, including shipments to Japan.
In addition, ASML marks significant progress on its EUV alpha tool development: collaborating vendors of mask blanks (SCHOTT Lithotec), photomasks (Toppan Photomasks) and optical systems (Carl Zeiss SMT) have been shipping their respective components to ASML. While the assembly of two alpha tools is in progress, the first projection system is being qualified and integrated, an important proof-of-concept for EUV lithography. ASML plans to ship the world’s first 0.25 NA EUV alpha tools in Q2 2006 to the Interuniversity MicroElectronics Center (IMEC) in Leuven, Belgium, and Albany NanoTech at the State University of New York at Albany, N.Y.
“The progress achieved in high NA immersion and EUV is compelling because both technologies offer real options for 32 nm lithography and beyond. Also, double exposure/double patterning should be considered to possibly extend 193 nm lithography,” said Martin van den Brink, ASML’s Executive Vice President, Marketing and Technology. “The industry must make roadmap choices and ASML is committed to align to the roadmap of its key customers. As always, we will provide access to early tools for collaborators, vendors and customers. Hands-on experience fosters industry-wide collaboration and will clarify roadmap choices.”
Source: ASML
Related stories:
AMD, Partners Produce Test Chip Using EUV Lithography
AMD, working together with its research partner, IBM, announced it has produced a working test chip utilizing Extreme Ultra-Violet (EUV) lithography for the critical first layer of metal connections across the entire chip.
IMEC demonstrates feasibility of double patterning immersion litho for 32nm node
IMEC showed in collaboration with ASML the potential of double patterning 193nm immersion lithography at 1.2NA for 32nm node Flash and logic.
SEMATECH Meeting Identifies Challenges to Maturing Maskless Lithography
Guided by input from more than 100 industry professionals, a SEMATECH-led steering committee has ranked the critical issues for bringing maskless
lithography (ML2) from R&D concepts to limited commercial production, possibly within the decade.
ASML Ships TWINSCAN XT:1900i Lithography System for Volume Production
ASML today announced that it has shipped its first TWINSCAN XT:1900i, the world’s only lithography system capable of imaging features down to 36.5 nanometers (nm) on chips manufactured in volume. Production of the XT:1900i is now ramping up fast, as multiple orders have been placed and systems will be shipped before the end of this year to many of the world’s leading device makers.
Nano World: A semiconductor nanotools boom
Semiconductor industry tools and instruments that work on the nanoscale could form a $5.5 billion market by 2012, experts told UPI's Nano World.
ASML Introduces the Industry's Highest NA Immersion Tool for Volume Chip Production at 45 nm Node
ASML Holding NV (ASML) today announced a new lithography system with the highest numerical aperture (NA) – 1.2 – in the semiconductor industry. The ASML TWINSCAN XT:1700i system is a 193 nm immersion scanner capable of volume chip production at the 45 nm node. The new system has a NA that jumped from 0.93 to 1.2, skipping the perceived, pre-immersion barrier of 1.0. The first shipment to a customer, a leading semiconductor manufacturer ordering its second ASML immersion system, will take place in Q1 2006.
IMEC concludes FEOL installation and enters into alliances for copper/low-k interconnect technology
IMEC successfully concludes installation of front-end-of-line (FEOL) tools with processing of first pathfinder lots. Strategic agreements with leading equipment manufacturers Applied Materials, Inc., ASM International and LAM Research Corporation have been extended to ramp up equipment installation for copper/low-k interconnect technology during the second half of 2005.
TSMC Verifies Fully Functional 90 Nanometer Chips Using Immersion Lithography Tools
Findings Suggests Immersion is Nearly Ready For Production
Taiwan Semiconductor Manufacturing Company, said that it used immersion lithography tools to produce fully functional 90nm devices. The finding was presented in a keynote speech at the Cymer Lithography Symposium in Semicon Japan on December 1, predating a similar announcement.
TSMC's circuits represent the first data that immersion-based
lithography systems are nearing production-ready status.