Students Design System to Return Astronauts to Earth

NASA's planned mission to the moon won't lift off for more than seven years, but student engineers at Texas A&M University are already designing the systems that could get it safely back to the ground.

The students designed a system of parachutes and air bags that could slow the crew return vehicle (a capsule similar to the ones used in the Apollo moon missions but much larger) after it enters Earth's atmosphere and cushion its landing on the ground.

They presented their designs — the product of a yearlong senior design course — to a review panel of top level NASA engineers and Texas A&M faculty engineers Dec. 4 in College Station.

William Schneider, a professor in Texas A&M's Department of Mechanical Engineering who, with Tom Lalk, Richard Alexander, and Muhamad Ijaz, supervised the students during the two-semester exercise, said the course is intended to give the students a taste of the process NASA uses to design components for space vehicles.

"The students came up with 50 different concept designs and narrowed that to four — one from each section of the class," said Schneider, a former senior engineer and assistant director for all Engineering at NASA's Johnson Space Center. "Then we down-selected the designs until we got to one."

The systems the students presented consisted of three 120-foot parachutes and an array of eight air bags housed between the vehicle's heat shield and the capsule itself.

The student engineers calculated how big the parachutes needed to be to slow the capsule through the last 10,000 feet of its descent, the length of the lines that connect the canopies to the capsule and determined the best materials for the canopies and suspension lines and the best method of sewing them.

They also designed an array of eight spherical airbags to cushion the capsule when it gets to the ground. The airbags would be stowed between the capsule and the heat shield until needed. Each airbag is actually two bags, one inside the other. The outer bags are intended to deflate as the capsule compresses them so that the capsule won't bounce when it hits. A second, smaller, bag inside each airbag will complete slowing the capsule to a stop on the ground.

Chris Hansen, an engineer in the NASA Engineering and Safety Center at the Johnson Space Center who attended the review presentation, said that exercises like this benefit both the students and NASA.

"I have been attending these reviews for several years and I've noticed a dramatic change in the students' performance," Hansen said. "They have continually improved their performance while tackling more and more difficult engineering problems.

"It also gives us a very useful head start on creating engineers with the skills needed to help us be successful in the future."

The students' 2007 design project will be part of the lander that will carry astronauts from an orbiting space vehicle to the surface of the moon, Schneider said.

Current plans call for the first manned mission in a series intended to eventually establish a permanent manned base on the moon to lift off in 2014.

Source: Texas A&M University

Related stories:

YES2 team claims a space tether world record
On 25 September, students around the world watched with bated breath as their creation, the second Young Engineers Satellite (YES2) experiment, reached its dramatic conclusion.
YES2 student payload released from Foton-M3
The Second Young Engineers’ Satellite (YES2) was activated and separated from the Foton-M3 spacecraft earlier today. The tether deployed for 8.5 km, after which the Fotino capsule was released on its way to Earth.
Lift-off for Foton microgravity mission
An unmanned Foton spacecraft, carrying a payload of more than 40 ESA experiments, was successfully launched earlier today. The Soyuz-U launcher lifted off from Baikonur Cosmodrome, Kazakhstan, at 13:00 CEST (11:00 GMT).
YES2 satellite given green light for launch
After 5 years of design and development work and preparation of the flight model, the second Young Engineers Satellite (YES2) experiment has passed its Final Acceptance Review and been given the green light by ESA for launch in September.
Students test 'space postal service' during Foton mission
How do you deliver a parcel down to Earth from space without using a rocket engine and fuel" The answer is YES2, a student experiment that was prepared, built and tested at ESA's research and technology centre, ESTEC, in Noordwijk, the Netherlands. Today, YES2 (Young Engineers Satellite) will be transported to Russia; the launch and operations will follow in September.
NASA Conducts First Test On New Motor For The Ares I Rocket
(PhysOrg.com) -- Engineers at NASA's Marshall Space Flight Center in Huntsville, Ala., have completed first-round testing of a critical motor for NASA's new Ares I rocket. The Ares I is a two-stage rocket that will launch astronauts aboard the Orion crew capsule on missions to the International Space Station and to the moon by 2020.
The M2-F1: 'Look Ma! No Wings!'
(PhysOrg.com) -- The planned retirement of the space shuttle fleet in 2010 will bring to a close an era that opened in the Antelope Valley nearly a half century ago.
NASA Engineers Complete Engine Test Series For Ares I Rocket
(PhysOrg.com) -- Engineers at NASA's Marshall Space Flight Center in Huntsville, Ala., have completed a series of tests on a key component of the J-2X engine. The J-2X powers the upper stage of the Ares I rocket, which will launch human explorers to the International Space Station and to the moon.

News discussion:

Students Design System to Return Astronauts to Earth in Space & Earth science news