Carbon Nanotubes Improve Fuel Cells

A group of scientists has created a new, improved fuel-cell electrode that is very lightweight and thin. Composed of a network of single-walled carbon nanotubes, the electrode functions nearly as well as conventional electrodes but renders the entire fuel cell much lighter. The research is an important step toward lightweight power supplies, which are becoming necessary as electronic devices get ever smaller and more streamlined.

The research was performed by scientists from the Max Planck Institute for Solid State Research and the University of Darmstadt, both in Germany, and is described in the March 5, 2008, online edition of Applied Physics Letters.

“Fuel cells that are light and small have been proposed as energy conversion devices in various portable appliances, such as cell phones, cameras, and notebook computers. Since the space and weight of the devices are key requirements, the energy density they provide should be maximized,” said the paper's corresponding scientist, Martti Kaempgen, now a researcher at the University of California at Los Angeles,* to PhysOrg.com. “In this context, carbon nanotubes have an advantage over other materials.”

The nanotube networks form the fuel cell's gas diffusion electrode, a layer of a porous material that allows gas and water vapor to pass through to the catalyst layer. In the catalyst layer, which typically consists of platinum particles, the protons and electrons of the gaseous reactant material—i.e. the fuel cell's fuel—are separated, and the electrons become electricity.

Earlier approaches utilizing carbon nanotubes in fuel cells have not taken full advantage of this material, only used as an additive to improve some of the properties of conventional electrode materials. But, until now, carbon nanotubes haven't been recognized as having the potential to replace the entire electrode.

Typically, carbon without any crystalline structure, known as amorphous carbon, is used in fuel cells because of its large surface area and porosity. Networks made of pure, single-walled carbon nanotubes boast the same properties, but weigh far less. They are ten times thinner and lighter than traditional electrodes. In addition, the long, thin shapes of the nanotubes give them a high conductivity—more than one thousand times larger than that of amorphous carbon. This is high enough that the current collector, another component of fuel cells, can be replaced as well.

The ability of a single material to perform several essential functions in a fuel cell leads to a much simpler fuel cell architecture.

The researchers tested the new electrode inside a home-made fuel cell using both hydrogen and oxygen gases as the fuel.

Though the overall performance of the electrode isn't all that impressive, “It is still comparable to conventional amorphous carbon types,” says Kaempgen. “And the lower performance is likely due to the preparation of the catalyst, which has yet to be optimized.”

*Kaempgen participated in this research while a Ph.D. candidate at the Max Planck Institute.

Citation: Applied Physics Letters 92, 094103 (2008)

Copyright 2008 PhysOrg.com.
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part without the express written permission of PhysOrg.com.

Related stories:

Hydrogen generation without the carbon footprint
A greener, less expensive method to produce hydrogen for fuel may eventually be possible with the help of water, solar energy and nanotube diodes that use the entire spectrum of the sun's energy, according to Penn State researchers.
Perfecting a solar cell by adding imperfections
Nanotechnology is paving the way toward improved solar cells. New research shows that a film of carbon nanotubes may be able to replace two of the layers normally used in a solar cell, with improved performance at a lower cost. Researchers have found a surprising way to give the nanotubes the properties they need: add defects.
How buckyballs hurt cells
A new study into the potential health hazards of the revolutionary nano-sized particles known as ‘buckyballs’ predicts that the molecules are easily absorbed into animal cells, providing a possible explanation for how the molecules could be toxic to humans and other organisms.
Nanotube production leaps from sooty mess in test tube to ready formed chemical microsensors
Carbon nanotubes’ potential as a super material is blighted by the fact that when first made they often take the form of an unprepossessing pile of sooty black mess in the bottom of a test tube. Now researchers in the University of Warwick’s Department of Chemistry have found a way of producing carbon nanotubes in which they instantly form a highly sensitive ready made electric circuit.
Go Speed Racer! Revving up the world's fastest nanomotors
In a “major step” toward a practical energy source for powering tomorrow’s nanomachines, researchers in Arizona report development of a new generation of sub-microscopic nanomotors that are up to 10 times more powerful than existing motors. Their study is scheduled for the May 27 issue of ACS Nano journal.
New Properties Discovered for Nanotube Sheets
A team of nanotechnologists at The University of Texas at Dallas, along with Brazilian collaborators, have discovered that sheets of carbon nanotubes can produce bizarre mechanical properties when stretched or uniformly compressed. These unexpected but highly useful properties could be used for such applications as making composites, artificial muscles, gaskets or sensors. The team’s findings are reported in the April 25 issue of the journal Science.
Silicon nanotubes for hydrogen storage in fuel cell vehicles
After powering the micro-electronics revolution, silicon could carve out an important new role in speeding the debut of ultra-clean fuel cell vehicles powered by hydrogen, researchers in China suggest.
Carbon Nanotube Measurements: Latest in NIST 'How-To' Series
The National Institute of Standards and Technology, in collaboration with the National Aeronautics and Space Administration, has published detailed guidelines for making essential measurements on samples of single-walled carbon nanotubes (SWCNTs). The new guide constitutes the current “best practices” for characterizing one of the most promising and heavily studied of the new generation of nanoscale materials.

News discussion:

Nanotechnology news