As part of IMEC’s centralized research platform for sub-45nm CMOS technologies, the new IMEC industrial affiliation program (IIAP) on Analog/RF-CMOS for the 45nm era defines its goals to keep conquering the ITRS challenges. The program aims to develop process modules and device architectures to achieve RF CMOS performance at the 45nm node and to provide the necessary models for active and passive devices. The potential of the technology will be assessed through the benchmarking of circuit demonstrators.
To maintain a competitive position in the analog/RF domain, significant efforts are needed for a timely exploration and exploitation of analog/RF applications that will become available in future CMOS technology. Until now, there is no worldwide consensus for (sub)-45nm mixed signal technologies. An early assessment of the potential technologies for analog/RF CMOS applications is therefore mandatory to establish a long-term development strategy. To this end, IMEC launches a new IIAP, 45nm analog/RF CMOS, that strongly builds on the successful results of the preceding 90nm program.
The continued scaling opens perspectives for CMOS well beyond the 10GHz frequency range. The scaling will also allow for further reduction of power consumption for applications in the 1-10GHz range. However, at the same time, limitations start to appear, especially with respect to Vdd scaling and loss of analog performance with the introduction of new materials. Also, the 45nm node (and beyond) is not well established for digital CMOS, which makes it more difficult to assess the analog/RF performance on the level of basic building blocks. The Analog/RF-CMOS IIAP has started beginning 2005 with an early assessment of the analog and RF performance of the different advanced process modules and device architectures. As a first result, a comparative study of planar MOSFETs versus FinFETs will already be presented at the IEDM conference in Washington at the end of this year. The second objective of the IIAP is to develop circuit topologies for 45nm Analog/RF CMOS that cope with the low Vdd operation and possible degradations of analog performance, with very high operating frequencies or with ultra low power consumption. The third objective is to provide circuit designers with state-of-the-art models of active and passive components for the 45nm analog/RF CMOS.
The IIAP builds on IMEC’s multidisciplinary expertise in silicon process technology, packaging technology with focus on the integration of passive components and circuit design. The IIAP will run over 3 years. IMEC is in the process of recruiting additional partners for its new IIAP. Besides the traditional candidates such as IDMs, equipment and material suppliers, also fabless companies are invited to participate.
Source: IMEC
Related stories:
Fujitsu Develops Low-power CMOS Technology For 32nm Generation
Fujitsu today announced the development of low-power CMOS technology for 32nm-generation logic LSIs, which makes it possible to minimize the number of necessary manufacturing processes for LSIs, and without the need to utilize additional new materials.
Intel Introduces New Atom Processors for Mobile Internet Devices
Intel Corporation today introduced five new Intel Atom processors and Intel Centrino Atom processor technology for Mobile Internet Devices (MIDs) and embedded computing solutions.
IMEC realized full CMOS multiple antenna receiver for 60 GHz
At today’s IEEE International Solid State Circuit Conference, IMEC introduced its prototype of a 60GHz multiple antenna receiver, and invites industry to join its 60GHz research program. The 60GHz band offers massive available bandwidth that enables very high bit rates of several Gbits-per-second at distances up to 10 meters (about 33 feet).
Pushing the limits of chip miniaturisation
Over the last four decades, computer chips have found their way into virtually every electronic device in the world. During that time they have become smaller, cheaper and more powerful, but, for a team of European researchers, there is still plenty of scope to push back the limits of miniaturisation.
Sematech Reveals Details on Practical High-K Metal Gate Systems for 45nm And Beyond
Building on their successful CMOS solution for gate‑first, thermally stable, high-k dual metal gates, SEMATECH researchers have released further data that portends a new era in which future transistor scaling is dominated by heterogeneous integration of new materials onto silicon.
UMC, ARM Partner to Deliver Comprehensive SOI Solutions for 65nm Technology
UMC and ARM today announced that a test chip built with ARM SOI (Silicon On Insulator) libraries was taped-out successfully on UMC's 65-nanometer (nm) SOI process. The test chip consists of a set of ARM physical IP that uses a standard cell library, an I/O library and a single-port SRAM memory compiler. This tape-out at UMC represents the next step towards mainstream adoption of nanometer SOI technology for improved speed and power in complex system on chips (SOCs).
Renesas, Matsushita Develop Technique for Stablizing Operation of 45nm On-Chip SRAM
Renesas Technology and Matsushita Electric Industrial today announced the development of a technique that achieves stable operation with 45nm process generation bulk CMOS for SRAM (Static Random Access Memory) that can be embedded in SoC (system-on-a-chip) devices and microprocessors (MPUs).
AMD and IBM Detail Early Results Using Immersion and Ultra Low-K in 45nm Chips
At the International Electron Device Meeting today, IBM and AMD presented papers describing the use of immersion lithography, ultra-low-K interconnect dielectrics, and multiple enhanced transistor strain techniques for application to the 45nm microprocessor process generation. AMD and IBM expect the first 45nm products using immersion lithography and ultra-low-K interconnect dielectrics to be available in mid-2008.