NEC Realizes Control of Position & Diameter of Carbon Nanotube

This result was achieved through the development of the following key technology:
Tiny, iron-doped resist dots were made into a pattern using EB lithography. Thermal annealing was subsequently carried out to segregate the iron nanoparticles in the dot pattern. Due to the original content of the iron dopant and the size of the resist pattern, the diameter of the particle can be effectively controlled well below the lithography limit.

Control of the position of resist dots is enabled through EB lithography, which uses high-resolution EB resist called "calixarene". Iron nanoparticles are precisely placed on the point where the original resist dot has been formed.

Single-walled carbon nanotubes ("SWNT") with a designed diameter can be grown from the iron nanoparticles using the high-yield CNT growth technique based on chemical vapor deposition ("CVD").

Using this lithographically-directed nanoparticle synthesis method, iron particles having a 1.7±0.6 nm diameter distribution were successfully patterned at a 100-nm pitch within a positioning accuracy of ±5 nm. CNTs were grown by CVD at 750°C using ethanol. As a result a CNT diameter distribution of 1.3±0.4 nm was obtained. NEC has already confirmed that the growing direction of CNTs can be controlled by applying an electric field during CVD growth. These techniques will enable NEC to grow CNTs with individually controlled position, diameter, and orientation.

These results are expected to promote the research and development of CNT transistors as high-performance electrical devices. NEC will continue to work on advancements in CNT control technology, electric characteristic control, device structure design, and fabrication process development with the aim of realizing a CNT transistor by 2010.

This result will be announced on September 4 at the 2004 autumn meeting of the Japan Society of Applied physics being held from September 1 to 4 in Sendai, Japan, and at the 2004 international conference on Micro- and Nano-Engineering being held from September 19 to 22 in Rotterdam, Holland. Japan Fine Ceramics Center (JFCC) and the New Energy and Industrial Technology Development Organization (NEDO) commissioned this research as a part of the Nanocarbon Application Product Creation Technology Project.

Carbon Nanotubes as a Single-Photon Source
Carbon nanotubes, as true multi-purpose materials, have potential applications in everything from electrical circuits and drug delivery to golf clubs and space elevators. Recently, physicists have investigated single-walled carbon nanotubes (CNTs) for one more use: as a single-photon source, where they could help make quantum communication networks extremely secure and efficient.
First Nano Grows Ultra-Long High Purity Aligned Carbon Nanotubes
First Nano grows high-density vertically aligned carbon nanotubes over 1 mm long.
First Nano today announced that lab experiments with the EasyTube 2000 System has proven to grow high purity, vertically aligned carbon nanotubes (CNT) over 1 mm long, on silicon substrate using an iron thin film catalyst. The fully automated, high-throughput EasyTube 2000 System is a chemical vapor deposition tool for the synthesis of nanotubes and other nanoscale materials.
Sweet nanotech batteries: Nanotechnology could solve lithium battery charging problems
Nanotechnology could improve the life of the lithium batteries used in portable devices, including laptop computers, mp3 players, and mobile phones. Research to be published in the Inderscience publication - International Journal of Nanomanufacturing - demonstrates that carbon nanotubes can prevent such batteries from losing their charge capacity over time.
NEC Succeeds in Fabrication of CNT Transistor Using Coating Process
NEC Corporation today announced the successful development of a carbon nanotube (CNT) transistor using a coating process. The basic operation of the new transistor with advanced characteristics has been verified, confirming its application in the printed electronics field.
Two Nanostructures Are Better Than One
Imagine using minuscule structures the size of molecules to harvest sunlight and convert it into electricity. Or employing the same structures to store hydrogen fuel so that it fits into a car’s gas tank. Or replacing today’s semiconductors with these structures, ushering in the next generation of small, powerful electronics.
Helping the carbon nanotube industry avoid mega-mistakes of the past
A new analysis of by-products discharged to the environment during production of carbon nanotubes (CNTs) — expected to become the basis of multibillion-dollar industries in the 21^st Century — has identified cancer-causing compounds, air pollutants, and other substances of concern, researchers reported here today at the 234^th national meeting of the American Chemical Society.
Carbon nanotube injectors probe living cells without damage
In order to investigate the processes that go on inside a single human cell—or even specific subcellular compartments—researchers need a device that is small and controlled enough to pass through the delicate cell membrane. Carbon nanotubes (CNTs), with their needle-like geometry, high elasticity and strength, have recently shown that they’re up to the task.
Researchers Shatter World Records with Length of Latest Carbon Nanotube Arrays
University of Cincinnati engineering researchers have developed a novel composite catalyst and optimal synthesis conditions for oriented growth of multi-wall CNT arrays. And right now they lead the world in synthesis of extremely long aligned carbon nanotube arrays.

NEC Realizes Control of Position & Diameter of Carbon Nanotube

Related stories:

News discussion: