Researchers at the National Institute of Standards and Technology have developed an elegantly simple, miniaturized technique for rapidly separating minute samples of proteins, amino acids and other chemical mixtures. A low-cost prototype device described in a recent paper can run up to eight separations simultaneously in a space about the size of a quarter, highlighting the technique's potential for use in microfluidic "lab-on-a-chip" systems.
Conventional electrophoresis instruments separate mixtures of electrically charged species--DNA fragments, for example--by injecting a discrete sample of the mixture at one end of a chemical race track, such as a capillary tube filled with a buffer solution, and applying a high voltage between the sample and the other end of the track.
Depending on their size, charge and chemical "mobility," the individual components of the mixture move down the track at different rates, gradually separating into individual bands. If two of the components move at very similar rates, it will require a relatively long channel--up to 50 centimeters or longer--to separate them effectively.
The new NIST technique, "gradient elution moving boundary electrophoresis" (GEMBE), works instead by opposing the movement of the mixture's components with a stream of buffering solution flowing at a variable rate. Like salmon swimming upstream, only the most mobile components can move up the channel against the highest buffer flow rates, but as that flow is reduced gradually, lesser mobility components begin to move. A sensor placed over the channel detects each new component as it arrives,
GEMBE is ideally suited for use in microfluidic "lab-on-a-chip" devices. Components are selected by buffer flow-rate rather than distance, so the channel can be very short--less than a centimeter in NIST prototypes. It doesn't require injection of a discrete sample, which greatly simplifies chip plumbing. By precisely controlling the flow rate, a particular component can be "parked" under the detector as long as desired to get a good signal, and the device can be adjusted easily to accommodate different separations. The device is easy to build with simple machining or molding techniques and low-cost polymers, enabling inexpensive mass production.
The technique has been validated at NIST with separations ranging from small dye molecules and amino acids to larger biomolecules, such as DNA. A prototype eight-channel GEMBE device built at NIST can produce a complete immunoassay calibration curve for insulin in a single run. NIST is applying for a patent on the method.
Citation: J.G. Shackman, M.S. Munson and D. Ross. "Gradient elution moving boundary electrophoresis for high-throughput multiplexed microfluidic devices." Anal. Chem., 79 (2), 565 -571, 2007. 10.1021/ac061759h S0003-2700(06)01759-8 on line at
http://pubs.acs.org/cgi-bin/abstract.cgi/ancham/2007/79/i02/abs/ac061759h.html
Source: National Institute of Standards and Technology
Related stories:
Bottoms up: Better organic semiconductors for printable electronics
Researchers from the National Institute of Standards and Technology and Seoul National University have learned how to tweak a new class of polymer-based semiconductors to better control the location and alignment of the components of the blend. Their recent results—how to move the top to the bottom—could enable the design of practical, large-scale manufacturing techniques for a wide range of printable, flexible electronic displays and other devices.
'Nanoglassblowing' Seen as Boon to Study of Individual Molecules
While the results may not rival the artistry of glassblowers in Europe and Latin America, researchers at the National Institute of Standards and Technology and Cornell University have found beauty in a new fabrication technique called “nanoglassblowing” that creates nanoscale (billionth of a meter) fluidic devices used to isolate and study single molecules in solution—including individual DNA strands. The novel method is described in a paper posted online this week in the journal
Nanotechnology.
Are nanobots on their way?
[The first real steps towards building a microscopic device that can construct nano machines have been taken by US researchers. Writing in the peer-reviewed publication,
International Journal of Nanomanufacturing from Inderscience Publishers, researchers describe an early prototype for a nanoassembler.
Researchers Prove Bridge from Conventional to Molecular Electronics Possible
Researchers at the National Institute of Standards and Technology have set the stage for building the “evolutionary link” between the microelectronics of today built from semiconductor compounds and future generations of devices made largely from complex organic molecules. In an upcoming paper in the
Journal of the American Chemical Society, a NIST team demonstrates that a single layer of organic molecules can be assembled on the same sort of substrate used in conventional microchips.
Good Vibrations Probe Innards of Molecular Electronic Junctions
Using an unusual spectroscopic technique, researchers at the National Institute of Standards and Technology have provided the most convincing evidence yet that current is flowing through a simple silicon-based molecular “sandwich,” which is the most basic structure of molecular electronics. The work is an important step toward realizing the dream of organic molecule-based electronics that could enable much denser, cheaper computer memories and other replacements of traditional electronic devices.
NIST Encasement Now Protecting 'America's Birth Certificate'
A hermetically sealed glass and aluminum encasement built by the National Institute of Standards and Technology will protect the first world map to label the lands of the New World as “America” when the “Exploring the Early Americas” exhibition opens Dec. 13, 2007, at the Library of Congress (LOC) in Washington, D.C. The 40-square-foot, state-of-the-art display case is the new home for the 1507 Waldseemüller map, often called “America’s birth certificate.”
Measurements from the edge: magnetic properties of thin films
Materials researchers at the National Institute of Standards and Technology, together with colleagues from IBM and the Massachusetts Institute of Technology, have pushed the measurement of thin films to the edge—literally—to produce the first data on how the edges of metallic thin films contribute to their magnetic properties. Their results may impact the design of future nanoscale electronics.
Tiny spectrometer offers precision laser calibration
A tiny device for calibrating or stabilizing precision lasers has been designed and demonstrated at the National Institute of Standards and Technology. The prototype device could replace table-top-sized instruments used for laser calibration in atomic physics research, could better stabilize optical telecommunications channels, and perhaps could replace and improve on the precision of instrumentation used to measure length, chemicals or atmospheric gases.
