Tiny refrigerator taking shape to cool future computers

Researchers at Purdue University are developing a miniature refrigeration system small enough to fit inside laptops and personal computers, a cooling technology that would boost performance while shrinking the size of computers.

Unlike conventional cooling systems, which use a fan to circulate air through finned devices called heat sinks attached to computer chips, miniature refrigeration would dramatically increase how much heat could be removed, said Suresh Garimella, the R. Eugene and Susie E. Goodson Professor of Mechanical Engineering.

The Purdue research focuses on learning how to design miniature components called compressors and evaporators, which are critical for refrigeration systems. The researchers developed an analytical model for designing tiny compressors that pump refrigerants using penny-size diaphragms and validated the model with experimental data. The elastic membranes are made of ultra-thin sheets of a plastic called polyimide and coated with an electrically conducting metallic layer. The metal layer allows the diaphragm to be moved back and forth to produce a pumping action using electrical charges, or "electrostatic diaphragm compression."

In related research, the engineers are among the first to precisely measure how a refrigerant boils and vaporizes inside tiny "microchannels" in an evaporator and determine how to vary this boiling rate for maximum chip cooling.

The research is led by Garimella and Eckhard Groll, a professor of mechanical engineering.

"We feel we have a very good handle on this technology now, but there still are difficulties in implementing it in practical applications," said Garimella, director of the Cooling Technologies Research Center based at Purdue. "One challenge is that it's difficult to make a compressor really small that runs efficiently and reliably."

Findings will be detailed in two papers being presented during the 12th International Refrigeration and Air Conditioning Conference and the 19th International Compressor Engineering Conference on July 14-17 at Purdue. The papers were written by doctoral students Stefan S. Bertsch and Abhijit A. Sathe, Groll and Garimella.

New types of cooling systems will be needed for future computer chips that will likely generate 10 times more heat than today's microprocessors, especially in small "hot spots," Garimella said.

Miniature refrigeration has a key advantage over other cooling technologies, Groll said.

"The best that all other cooling methods can achieve is to cool the chip down to ambient temperature, whereas refrigeration allows you to cool below surrounding temperatures," he said.

The ability to cool below ambient temperature could result in smaller, more powerful computers and also could improve reliability by reducing long-term damage to chips caused by heating.

One complication is that the technology would require many diaphragms operating in parallel to pump a large enough volume of refrigerant for the cooling system.

"So you have an array of 50 or 100 tiny diaphragm compressors, and you can stack them," Groll said.

The researchers conducted laboratory experiments with the diaphragms in Garimella's Thermal Microsystems Lab, developed a computational model for designing the compressor and validated the model with data from the lab. Findings showed that it is feasible to design a prototype system small enough to fit in a laptop, Garimella said.

The model enables the engineers to optimize the design, determining how many diaphragms to use and how to stack them, either parallel to each other or in series.

"If you stack in one direction, you get more pressure rise, and if you stack in the other direction, you get more volume pumped," Groll said.

Learning how to manufacture the devices at low cost is another major challenge, with industry requiring a cost of about $30 each.

"We can't currently produce them at this price, but maybe in the future," Groll said.

Another portion of the research focuses on learning precisely how refrigerant boils and turns into a vapor as it flows along microchannels thinner than a human hair. Such evaporators would be placed on top of computer chips.

Bertsch, the doctoral student who led work to set up experiments at the university's Ray W. Herrick Laboratories, observed how refrigerant boils inside the channels and measured how much heat is transferred by this boiling refrigerant. He also created mathematical equations needed to properly design the miniature evaporators.

"This overall project represents the first comprehensive research to carefully obtain data showing what happens to heat transfer in arrays of microchannels for miniature refrigeration systems and how to design miniature compressors," Garimella said. "Eventually, we will be able to design both the miniature compressors and evaporators."

Source: Purdue University

Related stories:

Purdue miniature cooling device will have military, computer uses
Mechanical engineers at Purdue University have new findings offering promise for modifying household refrigeration technology with small devices to cool future weapons systems and computer chips.
Future impact of global warming is worse when grazing animals are considered, scientists suggest
The impact of global warming in the Arctic may differ from the predictions of computer models of the region, according to a pair of Penn State biologists. The team -- which includes Eric Post, a Penn State associate professor of biology, and Christian Pederson, a Penn State graduate student -- has shown that grazing animals will play a key role in reducing the anticipated expansion of shrub growth in the region, thus limiting their predicted and beneficial carbon-absorbing effect. The team's results will be published in the online Early Edition of the journal Proceedings of the National Academy of Sciences sometime between 18 and 22 August 2008.
Compressor-free refrigerator may loom in the future
Refrigerators and other cooling devices may one day lose their compressors and coils of piping and become solid state, according to Penn State researchers who are investigating electrically induced heat effects of some ferroelectric polymers.
IBM Cools 3-D Chips with Water
In IBM’s labs, tiny rivers of water are cooling computer chips that have circuits and components stacked on top of each other, a design that promises to advance Moore’s Law in the next decade and significantly reduce energy consumed by data centers.
The world's largest fusion experiment of the stellarator type taking shape
The first milestone in the successive assembly of the Wendelstein 7-X fusion device at the Greifswald branch of Max Planck Institute of Plasma Physics (IPP), Germany, has been reached on schedule with the completion of the first two half-modules of the large-scale experiment: Two-tenths of the inner core of the device is now ready and is being assembled. Industrial production of the essential components for Wendelstein 7-X is almost complete. Construction of the complex device will take about another six years.
'NMR on a chip' features magnetic mini-sensor
A super-sensitive mini-sensor developed at the National Institute of Standards and Technology can detect nuclear magnetic resonance (NMR) in tiny samples of fluids flowing through a novel microchip. The prototype chip device, developed in a collaboration between NIST and the University of California, may have wide application as a sensitive chemical analyzer, for example in rapid screening to find new drugs.
Strengthening Fluids With Nanoparticles
Researchers at Rensselaer Polytechnic Institute have demonstrated that liquids embedded with nanoparticles show enhanced performance and stability when exposed to electric fields. The finding could lead to new types of miniature camera lenses, cell phone displays, and other microscale fluidic devices.
NIST helps heat pumps 'go with the flow' to boost output
Air-source heat pumps typically deliver 1 1/2 to three times more heating energy to a home than the electric energy they consume. This is possible because heat pumps move heat rather than convert it from a fuel (as combustion heating systems do). National Institute for Standards and Technology researchers are working to improve the performance of these energy superstars even further by providing engineers with computer-based tools for optimizing heat exchanger designs.

News discussion:

Technology news