A new window into the deformation of nanoscale materials

Materials on the nanoscale don't always have the same properties they would in bulk; for one thing, nanomaterials are often a lot harder. Unlike most bulk materials, a crystal that is small enough can be perfect, free of defects, capable of achieving strength near its ideal theoretical limit.

Scientists have long assumed that a crystal needs to be perfect to sustain stress at its theoretical limit. Beyond this point dislocations in the crystal lattice occur, and the crystal undergoes a nonreversible change of shape, or plastic deformation.

Now a team from the Department of Energy's Lawrence Berkeley National Laboratory, Purdue University, and Hysitron Incorporated in Minneapolis has found that things don't necessarily happen this way. Using special instrumentation with the JEOL 3010 In Situ Transmission Electron Microscope at the National Center for Electron Microscopy (NCEM), the researchers were able to correlate high-resolution load-displacement measurements with individual video frames, showing how nanoscale volumes of aluminum deform under stress from a diamond "nanoindenter."

"Although it's been assumed that you need a perfect volume of material to reach the ideal strength, our results show this is not always true," says Andrew Minor of Berkeley Lab's Materials Sciences Division, who led the research team. "The situation is more complex. We found that plenty of defects accumulate before the point that would usually be interpreted as the initial yield point."

And that's not all, Minor adds. "Surprisingly, even when the material had a high defect density it could withstand near-theoretical shear stresses."

Team member Zhiwei Shan says, "Ideas about the onset of plasticity during nanoindentation have typically been based on indirect evidence. Computational studies can calculate the ideal strength of a material based on its electronic structure and the bond strengths between the atoms in a perfect crystal. While researchers have tried to correlate these calculated ideal strengths with nanoindentation experiments, until now they've had to infer the relationship after the fact, mainly from the strengths achieved."

The specially equipped in situ transmission electron microscope that revealed the true sequence of events, says Minor, "is an experimental set-up unique in the world" because it combines, for the first time, two distinct ways of looking at the onset of plasticity during nanoindentation, producing images of the deformation events and mechanical data at the same time.

Nanoindentation techniques pioneered at NCEM feature real-time movies, which can be studied frame by frame, taken inside the transmission electron microscope. Another way of studying plasticity is outside the microscope, with sensors that precisely measure the forces imposed by the indenter as the system evolves. "Until now, attempts to correlate deformation events with force measurements have been ex post facto and thus inherently limited," says Minor.

The research team built a quantitative in situ nanoindenter by integrating a capacitive force sensor from Hysitron into a sample holder designed by NCEM, taking advantage of the in situ microscope's large sample-stage area. For the first time data and movies documenting nanoscale deformation events could be made simultaneously and directly.

"Most people have the force-versus-displacement graph but not the movie," says Shan. "On the graph, one big spike marks the 'pop-in' event -- usually thought of as the onset of plasticity. In movies, the first appearance of defects and displacements was thought to be the pop-in event."

"As it turns out, these two events don't necessarily coincide," says Minor. "In fact there are often faint signals of deformation before the actual pop-in event in many nanoindentation data sets, but these subtleties have often been regarded as noise, or just assumed to be unimportant."

A typical nanoindentation experiment with the new set-up involves a three-sided diamond indenter approaching the apex of a target grain of aluminum, a single crystal within a thin film of aluminum deposited on a silicon substrate. As the indenter loads the crystal -- pressing against it -- the load and displacement of the indenter are plotted on a graph. Simultaneously the video shows corresponding changes in the crystal.

In the evolving graph of one such event, two small transients are observed that correspond to video frames showing the sudden appearance of dislocations in the crystal. In the first event, the apparently flawless crystal instantly becomes overcome with defects. In the second event, the defects abruptly shift. These changes show dislocations (line defects in the crystal) breaking free, gliding over other sections, interacting, and then coming to rest at their new equilibrium positions.

Remarkably, although consumed with dislocations, the crystal is enduring shear stresses nearly equal to the calculated ideal strength of the material. Pop-in is still to come.

When it does, the event is inescapable on both graph and video frame. The graph shows a sustained rise in force, then a sudden relaxation of load as the crystal gives way. The video frame shows a new pattern of defect contrast and a different geometry of the defect-riddled crystal grain.

Says Shan, "These results challenge the traditional concept of the initial deformation of crystalline materials. The discovery poses many new questions about other kinds of nanoscale materials, including thin films, nanowires, and individual nanoparticles. We're eagerly pursuing those questions now."

Minor says, "For the first time we can directly investigate fundamental parameters like elastic moduli and the stresses required to initiate dislocations and their movement, a prospect that has the materials science community very excited. It's opened up a new window into the world of nanomechanics."

Source: Lawrence Berkeley National Laboratory

Related stories:

Leibniz Prize winners 2007 announced
The Deutsche Forschungsgemeinschaft (German Research Foundation, DFG) has announced the winners of its 2007 Gottfried Wilhelm Leibniz Prize. At its meeting on 7 December 2006, the DFG Joint Committee named ten scientists and academics — eight men and two women — as recipients of Germany’s most highly endowed research award. For the first time, the prize winners for 2007 will receive up to 2.5 million euros (previously: 1.55 million euros) and be able to use these funds flexibly over a period of seven years (previously: five years) to finance their research.
First helical structure in the nano-world
Although a commonplace structure in nature, the helix remains a mystery to scientific researchers. In biology, the structure is important as DNA is helical and so does the substructure of many proteins. Since its discovery about more than 50 years ago, the double helix has offered an important approach to interpret and make use of bio-organic structures. Yet, it is seldom to see a helical structure formed by inorganic crystal-state materials.
New technique to optimize computer speed
Who doesn’t dream of increasingly fast computers that consume less and less energy? To design these computers of the future, it is important to be able to control nanoscale strain in the processors. Until now, this strain remained difficult to observe. Now, thanks to a new electron holography technique invented by researchers at the Centre d’élaboration de matériaux et d’études structurales (CEMES-CNRS), it is possible to map deformation in a crystal lattice with a precision and resolution never previously attained.
Possible Mechanism for Enormous Electromechanical Response
Scientists at the U.S. Department of Energy's Brookhaven National Laboratory and collaborators at Stony Brook University, Johns Hopkins University, and the National Institute of Standards and Technology have discovered that nanosized regions with local polarizations, or "electric dipoles," in a special class of otherwise disordered materials may underlie these materials' extreme electromechanical response to an external electric field or physical deformation.
Spiraling nanotrees offer new twist on growth of nanowires
Since scientists first learned to make nanowires, the nano-sized wires just a few millionths of a centimeter thick have taken many forms, including nanobelts, nanocoils and nanoflowers.
Many stroke, heart attack patients may not benefit from aspirin
Up to 20 percent of patients taking aspirin to lower the risk of suffering a second cerebrovascular event do not have an antiplatelet response from aspirin, the effect thought to produce the protective effect, researchers at the University at Buffalo have shown.
'Hot' oxygen atoms on titanium dioxide motivated by more than just temperature
Like two ballroom dancers waltzing together, the two atoms of an oxygen molecule severed by a metal catalyst usually behave identically. But new research reveals that on a particular catalyst, split oxygen atoms act like a couple dancing the tango: one oxygen atom plants itself while the other shimmies away, probably with energy partially stolen from the stationary one.
Magnetic Alloy With Swiss Cheese Structure Morphs Shape
Researchers have turned a stubborn alloy into a shape-shifting foam by just giving it a little breathing room.

News discussion:

Ferroelectric / Piezoelectric Crystals in Nanotechnology news