The Feature-Rich Hard Disk Drive SOC Designed for Use in Consumer Electronics is First to Support the New CE-ATA Specs

These rapidly changing portable and handheld CE applications, with ever increasing processing power and growing feature sets, place new requirements on hard disk drives. In addition to the smaller physical size of these drives, which today incorporate 1.8”, 1.0”, and 0.85” media, new requirements include low pin count, battery-optimized low voltage operation, power efficiency, cost effectiveness and ease of integration. Marvell’s 88i6310 SOC was designed from the ground up to meet these unique requirements.

“For many years Marvell has maintained the vision that small form factor hard disk storage will be integrated into a wide variety of handheld and portable CE applications,” said Dr. Alan J. Armstrong, VP Marketing for Marvell’s Storage Division. “The recent surge in popularity of such devices, as evident in the growth of hard drive based music players, shows this vision is beginning to take hold. The 88i6310 is the result of a dedicated, four-year development effort producing the industry’s only SOC solution designed specifically for small form factor drives.”

"Trend Focus predicts the rapid adoption of small form factor hard disk drives, with shipments increasing at a CAGR of over 70% from 3.6 million units in 2003 to nearly 30 million units in 2007," said John Donovan, Vice President of Research, at industry analyst Trend Focus. "The introduction of single-chip SOCs such as Marvell’s 88i6310, which is designed specifically for small form factor drives, will be a key catalyst of this astounding growth."

To date, hard disk drive OEMs have designed small form factor disk drives to meet PC class requirements and re-purposed those drives for CE applications. Now, with the emergence of a new class of small drives designed specifically for CE applications, OEMs face a substantial resource and development cost challenge as they grapple with this new class of drives in addition to their traditional drive products. Marvell envisioned this challenge and developed a solution for its customers - an SOC architecture, utilizing Marvell’s production proven hard disk controller (HDC) and an ARM processor, which could be used across all product lines. This common architecture is the basis for the 88i6310 and other Marvell SOC products spanning the 3.5” desktop, 2.5” notebook and small form factor drive segments. The architecture enables customers to leverage firmware investment across multiple product platforms, saving valuable development resources. To further decrease development cost and to shorten design cycles for its customers, Marvell is the first hard disk drive semiconductor vendor to provide a complete firmware reference to accompany many of its SOC solutions including the 88i6310.

The 88i6310 SOC combines, on a single chip, Marvell’s production-proven hard disk controller (HDC) with Marvell’s 88C6300 low-power read channel core, highly advanced ECC technology, and an ARM966E-S microprocessor core. The 88i6310 offers multiple CE oriented host interfaces including USB 2.0, compact flash, Infrared (IrDA) and the CE-ATA interface, which is currently in specification development. The 88i6310 offers a flexible host interface engine that can be configured to support the CE-ATA interface once the specification is finalized. An additional feature of the Marvell 88i6310 is the battery-powered optimized 88C6300 read channel core, which offers a variety of power saving modes, including a deep sleep mode that can be utilized during different phases of device activity. A first in the market, the 88C6300 read channel was designed to operate in handheld battery operated environments where low voltage operation is critical to extend battery life.

The CE-ATA initiative was announced today at the Intel Developer Forum. Key industry players including Marvell Semiconductor, Inc., Hitachi Global Storage Technologies, Intel Corporation, Seagate Technology and Toshiba America Information Systems lead this new industry initiative.

Samsung Now Producing 256GB Solid State Drives
Samsung Electronics announced today that it has begun mass producing 256 gigabyte (GB) solid state drives for use in notebooks and desktop PCs. With the addition of the high-speed 256GB drive, Samsung now offers the most extensive line of SSDs in the industry with 8, 16, and 32GB SSDs for low-density designs and 64, 128 and 256GB alternatives for the higher densities.
Submillimeter Eagle Eyes on Mauna Kea
(PhysOrg.com) -- Three observatories on Mauna Kea have come together to form the world's most powerful facility for detailed submillimeter imaging. An exploratory project, the Extended Submillimeter Array (eSMA) will explore the Universe using light that the human eye cannot see, at wavelengths around 0.8 millimeter. There are many objects in the sky that emit radiation in this submillimeter range, especially the dusty regions in which new stars, planets and even entire galaxies are being born. These clouds of gas and tiny dust particles are completely dark in visible light, but submillimeter waves can penetrate them.
Fujitsu to Release New Energy-Efficient 500 GB 2.5'' HDD Models
Fujitsu Limited today announced that it has developed two new 500 GB 2.5" hard disk drive (HDD) models that feature a rotational speed of 5,400 RPM and deliver industry-leading levels of energy efficiency. The MJA2 BH series will be available from the end of December 2008, and the MJA2 CH series will be available in the first quarter of the 2009 calendar year.
SanDisk Introduces ExtremeFFS, Aims 100 Times Faster SSDs
SanDisk Corporation today unveiled an advanced flash file system for solid-state drives (SSDs) that yields dramatic improvement in performance and reliability for computing applications. Called ExtremeFFS, this next-generation patented flash management system – which has the potential to accelerate random write speeds by up to 100 times over existing systems – will ship in SanDisk products during 2009.
Hard disk error is sign it could fail
Q. The 40-gigabyte hard disk on my older Dell Windows XP computer has been giving me this error message when I try to start it: "primary hard disk 0 failure - no boot device available - no bootable device." But if I let the PC sit for 10 minutes, then restart it, it works as it should. It seems the computer works only after it has "warmed up." Any ideas?
Data revelations: Data on used hard drives poses security problem
Ongoing research to be published in the International Journal of Liability and Scientific Enquiry suggests that there is a huge amount of sensitive data still on redundant computer hard disks.
A card-swipe for medical tests: Diagnostic device uses same principle as hard disks, MP3 players
University of Utah scientists successfully created a sensitive prototype device that could test for dozens or even hundreds of diseases simultaneously by acting like a credit card-swipe machine to scan a card loaded with microscopic blood, saliva or urine samples.
'Digital dark age' may doom some data
What stands a better chance of surviving 50 years from now, a framed photograph or a 10-megabyte digital photo file on your computer's hard drive?

The Feature-Rich Hard Disk Drive SOC Designed for Use in Consumer Electronics is First to Support the New CE-ATA Specs

Related stories:

News discussion: