Rambus Unveils Micro-Threading in DRAM Cores

Delivers up to 4x Performance Improvement in 3D Graphics and Other Applications

Rambus Inc., one of the world's premier technology licensing companies specializing in high-speed chip interfaces, today unveiled an architectural breakthrough of applying micro-threading to DRAM cores. This innovation significantly increases memory subsystem efficiency, resulting in up to four times greater performance when compared to a traditional DRAM in applications such as 3D graphics, advanced video imaging, and network routing and switching.

Micro-threading increases memory system efficiency by enabling DRAMs to provide more usable data bandwidth to requesting memory controllers. A single core operation of a typical mainstream DRAM provides a larger amount of data than needed by many applications. As a result, large amounts of memory bandwidth are used to deliver a small amount of relevant data. Micro-threading enables the DRAM to provide several smaller relevant pieces of data in place of a single larger piece of data, resulting in higher memory bandwidth efficiency while minimizing power consumption.

"By applying micro-threading to a DRAM core, we are continuing our tradition of innovation by designing and developing advanced technologies to improve the bandwidth between DRAMs and their associated memory controllers," said Laura Stark, vice president of Platform Solutions at Rambus. "We look forward to working with our various DRAM partners to bring this exciting new technology to the market in high-volume applications."

With the application of micro-threading to a DRAM core, separate addresses are provided to different DRAM core partitions, enabling the requesting controller to generate multiple micro-RAS and micro-CAS operations in the same time it would take to generate a single RAS or CAS command to a standard DRAM. Simultaneously accessible banks allow for concurrent retrieval of data, which are then bundled into a single transmission.

Realistic interactive 3D applications such as games and visualization software require more complex scenes, composed of increasingly smaller textured polygons or triangles. A Rambus analysis showed that a standard GDDR SDRAM being used in a 3D application can deliver between 50 and 125 million triangles per second. If the same GDDR SDRAM were to be enhanced with micro-threading, the rate of delivered triangles would increase to between 100 and 500 million triangles per second. By enabling higher triangle rendering rates, micro-threading, as it is applied to a DRAM core, benefits the end user experience by providing richer visuals.

Micro-threading may be applied to existing DRAM cores with relatively low incremental cost. To benefit from the performance increase, DRAM controllers interfacing with micro-threaded DRAMs need to be optimized for the new technology. This patent pending micro-threading technology is available for licensing today.

Related stories:

Memory chip makers still hurting from supply glut
While chip companies are getting a much-needed boost from stable demand for consumer tech products, the glut in memory products continues to hurt many of them, analysts say.
Samsung Introduces High-performance, Low-density, SATA II SSDs
Samsung Electronics announced today that it has begun sampling low-density, higher-performance solid state drives (SSDs) that are only 30 percent of the size of 2.5-inch SSDs and highly cost-efficient to manufacture. With the introduction of these smaller, low-capacity SSDs, Samsung now offers an attractive replacement for existing hard drives used in low-cost PCs. Available in densities of 8GB, 16GB and 32GB, the new multi-level-cell SSDs will be mass produced beginning next month.
New Speed Record for Magnetic Memories
(PhysOrg.com) -- An experiment carried out at the Physikalisch-Technische Bundesanstalt (PTB) has realized spin torque switching of a nanomagnet as fast as the fundamental speed limit allows. Using this so-called ballistic switching future non-volatile magnetic memories could operate as fast as the fastest non-volatile memories. The experiments are described in the next issue of Physical Review Letters (22 August, 2008).
Elpida Ready to Launch World's Largest Capacity (16-Gigabyte) FB-DIMM
Elpida Memory, Japan's leading global supplier of Dynamic Random Access Memory (DRAM), announced today that it is ready to launch 16-gigabyte Fully Buffered DIMM (FB-DIMM), the world's largest capacity FB-DIMM. Based on its own unique integrated packaging technology (stacked FBGA or sFBGA) with 2-gigabit DDR2 SDRAM Elpida has achieved development of FB-DIMM products that feature an ultra thin thickness of 7.7mm along with the world's largest capacity of 16 gigabytes.
UMC's Embedded DRAM, URAM Proven in 65nm Customer Silicon
UMC, a leading global semiconductor foundry, today announced that it has produced functional 65nm customer products incorporating URAM, the company's patented embedded DRAM (eDRAM) technology.
Elpida Develops Top-Tier Power Efficient 2Gbps High-Speed DDR3 SDRAM
Elpida Memory, Inc., Japan's leading global supplier of Dynamic Random Access Memory (DRAM), announced today that it has developed a top-tier power efficient 1 Gigabit DDR3 SDRAM, which is capable of operating at an ultra-fast speed of 2 Gigabits per second (Gbps). By reducing power consumption to around the lowest possible level the new high-performance environmentally friendly DRAM marks an important milestone in Elpida's aggressive development of eco-products.
MySpace looks to USC to help servers keep up with users
How do you keep a potential half-billion social networkers current? A Viterbi School of Engineering expert tackles the growth problems of one of the world's largest computing systems.

Novel memory device is set to rival transistor-switched silicon-based memory
Working with an international group of researchers, Professor Gehan Amaratunga has produced a novel memory device which is set to rival transistor-switched silicon-based memory.

News discussion:

Technology news