Capturing Sunlight: Indoline Dyes Improve Efficiency of Solar Cells

Solar cell technology is marching ahead, though it still struggles with the two problems: efficiency and high production costs. In collaboration with Satoshi Uchida at the University of Tokyo, Michael Grätzel and his research group at the Swiss Federal Institute of Technology in Lausanne have now developed new sensitizers that should help an inexpensive type of solar cell to be more efficient. As they report in the journal Angewandte Chemie, the sensitizers are based on the dye indoline.

Some years ago, Grätzel developed photoelectrochemical solar cells that are inexpensive, easy to produce, and able to withstand long exposure to light and heat.

These "Grätzel cells" contain a mesoscopic layer of titanium oxide (TiO₂) particles coated with a sensitizing dye. Upon irradiation with light, electrons are injected from the dye adsorbed on the TiO₂, which are then transferred to the conducting band of the TiO₂ and collected at the back contact, and carried away by an external circuit. In order for the cell to work, the electrons that are injected into the TiO₂ must not recombine with the oxidized dye.

To prevent this, the cell contains an electrolyte solution with negatively charged iodide and triiodide ions as a redox couple dissolved in a solvent, which immediately reduce the holes created in the dye.

The main disadvantage of using volatile organic solvent in the electrolyte is the need for encapsulation of the electrolyte. Ionic liquids are an alternative to the use of these volatile solvent. These salts exist as liquids at low temperatures and do not evaporate. However, the high viscosity of these electrolytes is detrimental to the mass transport and consequently a problem for obtaining high efficiency.

Grätzel and his team compensated for this loss of efficiency by optimizing the sensitizer. In place of the usual ruthenium dyes, they used tailor-made organic dyes based on indoline, which have a higher molar extinction coefficient. This allows the TiO₂ films to be thinner, in turn reducing the electron path length. The combination thus attained an energy conversion yield of 7.2 %. This is a record for this type of cell (organic dye, ionic liquid, titanium oxide).

In this case the efficiency of the dye as a sensitizer is not only dependent on its chromophore, but also on its interfacial properties. So using a dye with an additional hydrocarbon chain has improved the performance by retarding the back electron reaction.

Citation: Michael Grätzel, Organic Dye-Sensitized Ionic Liquid Based Solar Cells: Remarkable Enhancement in Performance through Molecular Design of Indoline Sensitizers, Angewandte Chemie International Edition 2008, 47, No. 10, 1923–1927, doi: 10.1002/anie.200705225

Source: Angewandte Chemie

Related stories:

Molecular Switches: Optoelectronic components based on a dye-sensitized TiO2 solar cell
Electronic components must continue to get smaller: Miniaturization has now reached the nanometer scale (10^-9 m). In this tiny world, classic semiconductor technology is reaching its limits. We now need switches and other devices whose dimensions are on the scale of individual molecules. The difficulty with this is in the addressability and compatibility of molecular systems with the available nanoelectronic components. Until now, all molecular systems require at least one step in which a solution must be injected into the system and then rinsed out again, which is time-consuming.
New nano device detects immune system cell signaling
Scientists have detected previously unnoticed chemical signals that individual cells in the immune system use to communicate with each other over short distances.
Researchers Produce Best-Yet Dye-Based Solar Cells
In work that may help solar panels become a more viable source of mainstream power, a research group has created a dye-based solar cell with a high efficiency and high stability, and that lacks the volatile chemicals used in similar cells. This is a combination so far lacking in the newest solar-cell prototypes.
Breakthrough in efficiency for dye-sensitized solar cells
In a paper published in the journal Nature Materials, EPFL professor Michael Graetzel, Shaik Zakeeruddin and colleagues from the Changchun Institute of Applied Chemistry at the Chinese Academy of Sciences have achieved a record light conversion efficiency of 8.2% in solvent-free dye-sensitized solar cells.
Perfecting a solar cell by adding imperfections
Nanotechnology is paving the way toward improved solar cells. New research shows that a film of carbon nanotubes may be able to replace two of the layers normally used in a solar cell, with improved performance at a lower cost. Researchers have found a surprising way to give the nanotubes the properties they need: add defects.
Sweet nothings: Artificial vesicles and bacterial cells communicate by way of sugar components
For an organism to develop and function, the individual cells must exchange information, or communicate, with each other. Is it possible to learn their language and “talk to” the cells?
Sticky business – researchers devise new way of mapping the viscosity of cells
A fluorescent dye can be used to map how viscous, or 'gloopy', different parts of a cell are, according to new research published in the Journal of the American Chemical Society this month.
Space Station Tricorder
Any Trekkies out there? Remember the tricorder? Dr. McCoy and Mr. Spock both carried them, and they came in mighty handy exploring "strange new worlds ...where no one has gone before."

News discussion:

General Science news