NEC Electronics Introduces Industry's First Ultra-Low-Power 55-nanometer Embedded DRAM Technology

NEC Electronics today announced the industry's first 55- nanometer CMOS-compatible embedded DRAM (eDRAM) technology, UX7LSeD.

An enhancement to NEC Electronics' patented metal-insulator-metal (MIM2) technology, the new eDRAM process is the industry's first combination of hafnium silicate film and nickel silicide, which has resulted in reduced power consumption and leakage current at this advanced node. Optimized for high-speed, low-power operation, the new process can be applied to system-on-chip (SOC) devices designed for a broad range of products—from mobile equipment such as cell phones and mobile handheld devices to digital consumer devices such as gaming consoles.

The introduction of hafnium silicate film to the embedded DRAM process has allowed NEC Electronics to reduce leakage current while increasing on-current by as much as 20 percent. Reducing the leakage current is an important factor to maintaining reasonable data retention time in eDRAM macros. The new manufacturing material also has allowed NEC Electronics to continue to use polysilicon gates, as opposed to metal gates, which helps to reduce process risks for volume production.

The use of nickel silicide, a material suitable for aggressively scaled structures, helps to maintain low parasitic resistance of the scaled-down eDRAM cell and peripheral circuits and also reduce standby and operating power. Furthermore, the high dielectric constant (high-k) technology applied to the eDRAM cell transistor boosts its performance, reduces leakages and suppresses variability, as the work-function modulation effect of high-k is fully exploited to reduce transistor channel concentration.

These new materials and the proprietary MIM2 technology are enabling NEC Electronics to deliver robust eDRAM solutions with smaller cell sizes, higher memory integration, ample storage capacitance and lower cell heights, and all the while maintain the merits of existing eDRAM technology, such as CMOS compatibility, low power and high-speed random access.

"By delivering the only CMOS-compatible eDRAM at the 55 nm node, NEC Electronics is enabling designers to overcome the limitations of embedded SRAM and discrete DRAM components to achieve high-performance SOCs for next-generation applications," said Takaaki Kuwata, general manager, Advanced Device Development Division, NEC Electronics. "A combination of innovative materials and our mature MIM2 process, the new eDRAM offers low leakage power in a high-speed, high-density solution. In fact, NEC Electronics already has earned four patents for the MIM capacitor, the silicided eDRAM cell, the bit-contact structure and the MIM lower electrode structure."

NEC Electronics' eDRAM uniquely combines DRAM density with SRAM-like performance, low latency and robust performance. With lower power consumption and a lower soft error rate than embedded SRAM, NEC Electronics' eDRAM has blocks that can be rotated in any orientation on a chip to simplify integration with other on-chip components while preserving the performance and power consumption benefits afforded by NEC Electronics' process. The upper metal layers of an ASIC also can be routed over the top of eDRAM blocks to simplify chip design, improve timing and conserve silicon.

The NEC Electronics process employs both a cylindrical-type stacked capacitor structure that ensures high yields and a low-temperature MIM2 capacitor that accelerates performance. The MIM2 technology uses zirconium oxide (ZrO₂), a dielectric material with a high-k factor that allows the embedded DRAM's smaller bit cells to retain storage capacitance. Unlike its commodity DRAM process, NEC Electronics' eDRAM process uses the same structure as its standard CMOS process, and thus is fully compatible with it. This compatibility dramatically reduces turnaround time by minimizing the number of process steps needed to add eDRAM.

NEC Electronics' 55 nm 8-megabit (Mb) and larger embedded DRAM macros are expected to be available for volume production in the second half of 2007.

Source: NEC Electronics

Related stories:

Microsoft Deploys NEC Electronics' Embedded DRAM Technology in Its Next Generation Xbox Platform
NEC Electronics Corp. today announced that Microsoft will incorporate leading-edge embedded DRAM (eDRAM) technology from NEC Electronics in the next generation Xbox platform. The high-performance eDRAM macros designed by NEC Electronics are a key piece of the graphics subsystem and will enable the console to provide users with a stunning high-definition (HD) graphics experience. The eDRAM graphics chip is manufactured in NEC Electronics' 300-millimeter (mm) wafer fabrication facility, which runs the company's most advanced processes.
NEC Unveils 90-Nanometer Embedded DRAM Technology
New ZrO₂ Dielectric Material Increases Performance of CMOS-Compatible Embedded DRAM

NEC Electronics Corporation today announced its new metal insulator metal (MIM) technology for 90 nanometer embedded DRAM (eDRAM), called MIM2. In addition, to meet the technical challenges presented by moving the company's established CMOS-compatible eDRAM technology to a 90 nm process, NEC Electronics, ahead of other vendors, has adopted the use of zirconium oxide (ZrO₂), a new dielectric material with a higher-k factor that allows the embedded DRAM's smaller bit cells to retain storage capacitance. With this new ZrO₂ technology, NEC Electronics, a leader and pioneer of CMOS-compatible eDRAM, is well positioned to move its eDRAM technology to even smaller process geometries as it evolves.
UMC's Embedded DRAM, URAM Proven in 65nm Customer Silicon
UMC, a leading global semiconductor foundry, today announced that it has produced functional 65nm customer products incorporating URAM, the company's patented embedded DRAM (eDRAM) technology.
IBM Extends Moore's Law to the Third Dimension
IBM today announced a breakthrough chip-stacking technology in a manufacturing environment that paves the way for three-dimensional chips that will extend Moore’s Law beyond its expected limits. The technology – called “through-silicon vias” -- allows different chip components to be packaged much closer together for faster, smaller, and lower-power systems.
IBM Reveals Breakthrough eDRAM Memory Technology
In papers presented at the International Solid State Circuits Conference, IBM revealed a first-of-its-kind, on-chip memory technology that features the fastest access times ever recorded in eDRAM (Embedded Dynamic Random Access Memory). IBM's new microchip technology will more than triple the amount of memory stored on chips and double the performance of computer processors. It will be available in 2008.

News discussion:

Technology news