The remarkable new branched structures are described in the July 8 issue of Nature by researchers in the laboratory of Paul Alivisatos, director of Berkeley Lab's Materials Sciences Division and professor of chemistry at the University of California at Berkeley, and by members of the Scientific Computing Group in Berkeley Lab's Computational Research Division, in affiliation with the Department of Energy's National Energy Research Scientific Computing Center (NERSC) based here.
The ability to independently tune the separate components of the nanostructures with unprecedented accuracy, and to calculate the electronic interactions of their branches in three dimensions, will enable researchers to create electronic devices tailored to a variety of uses. The structures can be chemically manufactured in large quantities, for potential applications ranging from quantum computing to artificial photosynthesis.
Building branched nanostructures
"We had previously found a way to create tetrapods" — a structure with four branching "feet" or arms — "of a single semiconductor material, cadmium telluride, simply by varying the crystal phase," says Delia Milliron, a graduate student in the Alivisatos laboratory.
Steve Hughes, also a graduate student on the project, explains that "between no branching and excessive branching there's a fine point where the tetrapods form nicely." At a high concentration of cadmium and tellurium in suspension the atoms crystallize into the cubic zincblende structure, whereas at lower concentrations the compound grows in the hexagonal wurtzite structure. The two kinds of crystal are otherwise similar, with each atom bonding to four others.
Says Milliron, "It occurred to us that for electronic purposes we might be able to make branching structures from more than one kind of material — theoretically you could use anything with the two crystal phases. Once you have two materials, the branching possibilities increase enormously."
The Alivisatos group, having long experience with cadmium compounds, used suspensions of cadmium, selenium, tellurium, sulfur, and other constituents. When these are assembled from liquid solution, crystals of different cadmium compounds are formed. "Sure enough, the very first time I tried it, I got branches," says Milliron.
A given structure begins with a quantum dot, described by post-doctoral fellow Yi Cui as "a conglomeration of a few hundreds or thousands of atoms in which it's possible to control a single electron." The dot is then made to sprout four arms made of the same or a different compound so that, says Cui, "Now you've effectively got four quantum rods coupled electronically with the central quantum dot. These coupled quantum systems might be useful in quantum computation."
The arms of such a tetrapod can be lengthened into nanorods containing segments of different compounds. Nanorods, whether or not they are the arms of tetrapods, can be induced to branch into separate rods of the same or a different compound. New chemical procedures allow the branch points to be specified at will and different materials to be grown selectively on the ends of the nanorods.
Calculating the electronic properties of the structures depends on which compounds are involved, how they are joined, the number and arrangement of their atoms, and their proximity to other structures.
"Once we had developed a rich set of structures, we wanted to have some basic starting points to investigate their electronic properties," says Milliron. "It was time to bring in the Computational Research Division." CRD's Lin-Wang Wang and postdoctoral fellow Jingbo Li have long worked closely with the Alivisatos group.
"In this case," Wang says, "once they had synthesized the different shapes using legs and dots of different materials, we helped them figure out what they might be good for."
"I had made some simple predictions based on simple assumptions," says Milliron. "But they made no assumptions, and got some results we hadn't foreseen."
Upon analysis, some of the new composite forms suggested possible future applications in quantum computers, which operate by controlling the coherence (relatedness) of small collections of electron wavefunctions. And the unusual electronic band structures of some forms have possible implications for photovoltaic energy conversion in solar cells.
Nano-electronics through high-powered calculation
Wang defines a nanostructure as "an assembly of building blocks on the scale when their properties become different from their bulk counterparts." A nanostructure may be comprised of anywhere from a few hundred to a million atoms. While existing methods of calculation are well developed for very small collections of atoms, as in a molecule, or very large collections (virtually infinite) in bulk materials, the region in between is where calculations run into problems.
"One would like to use ab initio methods, which start by simply inputting a few atomic numbers and deriving the properties and behavior of the system directly," Wang says. "The Schrödinger equation theoretically makes that possible, but in practice calculating anything larger than a single helium atom necessarily involves simplifications and approximations."
Physicists use a modified ab initio technique called the local density approximation (LDA) to calculate the electronic structures of small systems (density refers to the electron charge density in specific regions of the sample).
"Even with LDA, you could spend months doing a straightforward calculation of the electron wavefunctions and their charge densities for a nanosystem with thousands of atoms," Wang says. The memory needed for calculation increases as the square of the number of atoms in the system — while the needed processing power increases as the cube! A million-atom system is far out of reach of LDA.
So Wang and his colleagues developed a hybrid method, which draws on LDA to determine the charge density in one small region of a crystal, then by "charge patching" extends the charge density to the entire system, in this case a quantum dot or nanorod.
To accurately model a nanostructure, Wang begins by "passivating" its surface with fractionally charged pseudo-hydrogen atoms — mathematical entities that assign the surface atoms the same reactivity as that of a real nanoparticle's in suspension. The positions of the interior atoms are calculated with the valence force field method, which models the strength, elasticity, and direction of bonds among atoms.
Then LDA is used to determine the charge "motifs" around a number of representative atoms, including the surface pseudo-hydrogens. Through charge patching, the calculation is extended to include the entire nanostructure. In a final step, a "folded spectrum" method that Wang developed 10 years ago is used to determine the material's electronic states near the band gap, including the highest-energy state of the valence band (which in an ideal semiconductor is filled with electrons) and the lowest energy state of the conduction band (which is empty of electrons).
Mapping the ways different compounds are assembled into different structures reveals the structures' very different optical and electronic properties. "The charge-patching method allows us to model thousand-atom structures with ab initio accuracy in about one hour, with the help of the Seaborg supercomputer at NERSC," says Wang. "This gives us unprecedented power to predict the electronic and optical properties of a given nanostructure."
The marriage of nanostructure fabrication with the ability to precisely calculate electronic properties opens possibilities for collaboration in more ways than one. "In this case the researchers had already synthesized the structures, and we were able to tell them the electronic properties and how they change with alterations," Wang says. "In the future, by modeling a proposed system in advance, we could help decide what's possible and how to control their results."
The nanobuilders are eager to pursue such possibilities, with all the members of the research team doing "each person's own thing," Milliron says. Nanoscale photovoltaics, quantum computers, and ultrafast transistors are some of the possible outcomes.
"Colloidal nanocrystal heterostructures with linear and branched topology," by Delia J. Milliron, Steven M. Hughes, Yi Cui, Liberato Manna, Jingbo Li, Lin-Wang Wang, and Paul Alivisatos, appears in the July 8 issue of Nature.
The Berkeley Lab is a U.S. Department of Energy national laboratory located in Berkeley, California. It conducts unclassified scientific research and is managed by the University of California. Visit our website at http://www.lbl.gov.
Source:
Lawrence Berkeley National Laboratory
Related stories:
New probe could aid quantum computing
(PhysOrg.com) -- MIT researchers may have found a way to overcome a key barrier to the advent of super-fast quantum computers, which could be powerful tools for applications such as code breaking. Ever since Nobel Prize-winning physicist Richard Feynman first proposed the theory of quantum computing more than two decades ago, researchers have been working to build such a device.
Researchers explain odd oxygen bonding under pressure
Oxygen, the third most abundant element in the cosmos and essential to life on Earth, changes its forms dramatically under pressure transforming to a solid with spectacular colors. Eventually it becomes metallic and a superconductor. The underlying mechanism for these remarkable phenomena has been fascinating to scientists for decades; especially the origin of the recently discovered molecular cluster (O2)4 in the dense solid, red oxygen phase.
Scientists demonstrate potential of graphene films as next-generation transistors
Physicists at the University of Pennsylvania have characterized an aspect of graphene film behavior by measuring the way it conducts electricity on a substrate. This milestone advances the potential application of graphene, the ultra-thin, single-atom thick carbon sheets that conduct electricity faster and more efficiently than silicon, the current material of choice for transistor fabrication.
Scientists carve functional nanoribbons using super-heated, nano-sized particles of iron
Due to its remarkable electronic properties, few layer graphene, or FLG, has emerged as a promising new material for use in post-silicon devices that incorporate the quantum effects that emerge at the nanoscale. Now, physicists at the University of Pennsylvania have demonstrated a new method by which FLG can be etched along flawless, crystallographic axes by using thermally activated nanoparticles, a technique that results in atomically precise, macroscopic length ribbons of graphene. The advance could enable atomically precise, and far simpler, construction of integrated circuits from single graphene sheets with a wide range of technological applications.
The Lightness of Electrons in a Twisting Metal Crystal
(PhysOrg.com) -- A team of researchers at Princeton University's Materials Research Science and Engineering Center has observed electrons moving through a crystal of bismuth metal behaving like light.
Material may help autos turn heat into electricity
Researchers have invented a new material that will make cars even more efficient, by converting heat wasted through engine exhaust into electricity. In the current issue of the journal
Science, they describe a material with twice the efficiency of anything currently on the market.
Study reveals principles behind stability and electronic properties of gold nanoclusters
A report published in the July 8 issue of the journal
Proceedings of the National Academy of Sciences (
PNAS) is the first to describe the principles behind the stability and electronic properties of tiny nanoclusters of metallic gold. The study, which confirms the "divide and protect" bonding structure, resulted from the work of researchers at four universities on two continents.
Research helps understand factors that influence efficiency of organic-based devices
Organic-based devices, such as organic light-emitting diodes, require a transparent conductive layer with a high work function, meaning it promotes injection of electron holes into an organic layer to produce more light.
