NASA Successfully Completes First Series of Ares Engine Tests

NASA engineers Thursday successfully completed the first series of tests in the early development of the J-2X engine that will power the upper stages of the Ares I and Ares V rockets, key components of NASA's Constellation Program. Ares I will launch the Orion spacecraft that will take astronauts to the International Space Station and then to the moon by 2020. The Ares V will carry cargo and components into orbit for trips to the moon and later to Mars.

NASA conducted nine tests of heritage J-2 engine components from December to May as part of a series designed to verify heritage J-2 performance data and explore performance boundaries. Engineers at NASA's Stennis Space Center near Bay St. Louis, Miss., conducted the tests on a heritage J-2 "powerpack," which, in a fully assembled engine, pumps liquid hydrogen and liquid oxygen into the engine's main combustion chamber to produce thrust. The test hardware consisted of J-2 components used from the Apollo program in the1960s through the X-33 program of the 1990s.

"This series of tests is an important step in development of the J-2X engine," said Mike Kynard, manager of the upper stage engine for the Ares Projects at NASA's Marshall Space Flight Center in Huntsville, Ala. "We started with a number of objectives and questions we needed answers to as we work to complete designs of the J-2X engine. The data we have gained will be invaluable as we continue the design process."

Data obtained from the tests will be used to refine the design of the J-2X pumps and other engine components to provide the additional performance required of this new engine. The J-2X engine is being designed to produce 294,000 pounds of thrust; the original J-2 produced 230,000 pounds of thrust.

The main objectives of the series were to resolve differences in heritage turbopump performance data and recent component-level tests, and investigate vibration and pressure drops through the turbopump inlet ducts. Tests in the series ran for durations up to 400 seconds and at power levels up to 274,000 pounds of thrust.

After the data from the test series has been reviewed and objectives met, Stennis will begin readying the test stand for the next series of tests, said Gary Benton, the J-2X project manager at Stennis.

Marshall manages the J-2X upper stage engine for the Constellation Program, based at NASA's Johnson Space Center in Houston. Under a contract awarded in July 2007, Pratt and Whitney Rocketdyne Inc., of Canoga Park, Calif., will design, develop, test and evaluate the engine.

Source: NASA

Related stories:

Independent tests validate BMW Hydrogen 7 emissions well-below SULEV
Independent tests conducted by engineers at the U.S. Department of Energy's (DOE) Argonne National Laboratory on a BMW Hydrogen 7 Mono-Fuel demonstration vehicle have found that the car's hydrogen-powered engine surpasses the super-ultra low-emission vehicle (SULEV) level, the most stringent emissions performance standard to date.
Purdue wind tunnel key for 'hypersonic vehicles,' future space planes
By using the only wind tunnel capable of running quietly at "hypersonic" speeds, Purdue University engineers have conducted experiments to yield critical data for designing an advanced aircraft called the X-51A, powered by engines called scramjets.
NASA to Begin Testing Engine That Will Power Ares Rockets
In December, NASA will begin testing core components of a rocket engine from the Apollo era. Data from the tests will help NASA build the next generation engine that will power the nation's new Ares launch vehicles on voyages that will send humans to the moon.
Microsoft's FCS Only Partially Delivers the Goods
Review: eWEEK Labs found that Microsoft's new Forefront Client Security package meets only the baseline requirements for an enterprise security solution.
NASA Successfully Completes Engine Hardware Tests for Ares V
NASA engineers have successfully completed testing of subscale main injector hardware, an early step in development of the RS-68 engine that will power the core stage of NASA’s Ares V -- the cargo launch vehicle that will deliver large-scale hardware and systems to space for exploration missions to the moon.
Rapid-fire: Electrical circuit may bring Sandia Z to fusion sooner
An electrical circuit that should carry enough power to produce the long-sought goal of controlled high-yield nuclear fusion and, equally important, do it every 10 seconds, has undergone extensive preliminary experiments and computer simulations at Sandia National Laboratories’ Z machine facility.
SMART-1 impacts Moon (Update 2)
At 07:42:22 CEST (05:42:22 UT) today, the SMART-1 spacecraft impacted the Moon's surface as planned, ending ESA's first solar-powered mission to another celestial body and Europe's first mission to the Moon. ESA estimates that impact occurred at 46.2º West, 34.4º South.
New Super-Efficient Plug-in Hybrid Unveiled
"Trinity," a highly fuel-efficient plug-in hybrid vehicle, was unveiled today by engineering students at the University of California, Davis. The vehicle is the team's entry in the national Challenge X competition, sponsored by General Motors Corp. and the U.S. Department of Energy. Field trials for the competition will take place in Phoenix next month.

News discussion:

Space & Earth science news