In collaboration with Philips' semiconductors division, scientists at Philips Research have developed an innovative new process technology for producing high-performance BAW (Bulk Acoustic Wave) filters on silicon wafers, each filter being housed in a chip-scale package fabricated as an integral part of the wafer processing. Aimed at replacing the SAW (Surface Acoustic Wave) and ceramic devices currently used as antenna filters in mobile phones, BAW filters fabricated in this new technology offer high performance coupled with smaller physical size. They therefore represent a critical step in reducing the footprint of RF modules so that more functionality can be squeezed into next-generation wireless products.
As more and more communications systems start to use frequency bands in the 800 MHz to 10 GHz range, antenna filters have become increasingly important in preventing one system from interfering with another system that uses close frequency bands. These filters therefore need to have bandpass characteristics that accurately match a particular system's range of carrier frequencies, together with the ability to handle the maximum RF power levels transmitted by mobiles. Compared to SAW filters, BAW filters have considerably better power handling capabilities and better temperature coefficients (typically less than 21 ppm/degree Kelvin), leading to more stable operation. Compared to ceramic filters they offer much smaller component size.
The BAW filters developed by Philips use a solidly mounted aluminum nitride BAW element to provide physical robustness and excellent power handling, mounted on a Bragg reflector to isolate acoustic vibrations from the silicon substrate. Designed using 2-dimensional modeling techniques developed specially by Philips, these BAW elements exhibit a Q-factor in excess of 1000 and a typical insertion loss of 0.5 dB per filter section (less than 2 dB total for a typical 3-section filter). A protective cover and flip-chip solder balls are added to the device during wafer processing, with devices needing no further packaging operations after the wafer is sliced up into individual components.
Philips Research has successfully demonstrated BAW resonators and filters based on this technology operating at frequencies up to 16 GHz, but believes that their main application will lie in the 800 MHz to 10 GHz ranges, serving the needs of wireless transceivers for systems such as Bluetooth, GSM/GPRS/EDGE, UMTS and IEEE 802.11a. The BAW filters can both be used as separate components and could be a part of integrated RF System-in-Package solutions for wireless applications.
Source:
Philips
Related stories:
Philips To Improve The Performance of GSM and 3G Mobile Phones
Royal Philips Electronics today announced a family of advanced, bulk acoustic wave (BAW) filters and duplexers that significantly enhance the performance of multimedia mobile phones. Philips' new BAW filters feature patented reduced form factor chip-scale packaging technology. This improves the performance and reception of GSM and 3G mobile phones, while reducing space in mobile handset designs. As mobile handset manufacturers add new wireless technologies and features to meet the connected consumer’s demands for more entertainment and functionality on the move, the filters become an even more important part of the overall design.
Personal TV Channels: Guiding you through a multi-channel universe
Finding your way through the ever-growing amount of TV content can be frustrating, especially when all you want to do is watch your favorite show. Now Philips has found a way to make everyone’s TV experience easier and more enjoyable. With Philips’ new Personal TV Channels technology, you select your favorite TV shows just once and then the system automatically manages the recording of all upcoming episodes. Based on the programs selected, the system (integrated into a set-top box) even suggests other programs that match your interests. Philips’ technology is easy to use and quickly responds to your preferences.
New project on ferroelectric films: Cheaper, smaller and less energy consuming components for laptops, mobiles
Chalmers University of Technology in Gothenburg, Sweden, has together with five European partners started a three year project, Nanostar, for mastering of nanostructured multifunctional ferroelectric films for low cost mass production of microwave devices.
Philips shows functional, large-scale demonstrator of its electrowetting-based electronic-paper technology
Philips generated considerable interest at this year's Society for Information Displays in Seattle, USA with a demonstration of its electrowetting-based electronic-paper technology in a 1-inch square, monochrome direct-driven display demo. The demonstrator represents a 50-fold increase in area over earlier prototypes and clearly shows the scalability of this novel, low-power display technology to larger areas.
Philips announces new WLAN and Bluetooth solutions that work together seamlessly in mobile phones and portable devices
Philips system-in-a-package technology achieves highest integration and smallest size
Royal Philips Electronics today announced new 802.11b low-power Wireless Local Area Network (WLAN) and Bluetooth semiconductor 'system-in-a-package' (SiP) solutions specifically designed to operate at the same time in small form-factor systems such as smart phones, PDAs and other portable devices. Both WLAN and Bluetooth technologies are popular wireless connections for voice and data communications. The two technologies use the same frequency spectrum, which must be shared effectively for both technologies to be used at the same time. Philips has developed specialized hardware and software that is embedded in its WLAN and Bluetooth SiPs to meet this challenge.
A human approach to computer processing
A more human approach to processing raw data could change the way that computers deal with information, according to academics at The University of Nottingham.
Do laser printers emit harmful particles?
(PhysOrg.com) -- Researchers have investigated the possibility that laser printers emit pathogenic toner particles into the air, which has been a subject of public controversy. Some reports have suggested that laser printers release tiny particles that could have negative health effects.
For diabetics, preventing renal failure is hard work but essential
Diabetes has cost Robert Heard dearly. His left leg was amputated below the knee two years ago. Kidney failure - with its special diets, thrice-weekly dialysis, and ever-present threats of infection - is worse.
