At this week’s VLSI Symposium, IMEC presents significant progress in the manufacturability, circuit performance and reliability of FinFETs. The results advance FinFET process technology towards being a candidate for the 32nm node and beyond.
FinFETs are a promising approach to address short-channel effects and leakage issues when scaling CMOS towards the 32nm node and beyond. Doping fluctuations in nano-scale planar devices are one of the several concerns in further scaling, while FinFETs have the potential of being able to operate without channel dopants.
IMEC has improved its process to yield reproducible FinFETs with fin widths down to 5nm and high aspect ratio using 193nm immersion lithography and dry etching. By using these ultra-thin body devices, the need of channel doping is eliminated. This results in reduced parametric spread due to dopant fluctuations together with reduced junction leakage.
Analyzing various circuit topologies, IMEC demonstrates experimentally that the performance of FinFET circuits is superior to bulk CMOS circuits and satisfies future digital library requirements. A ring oscillator has been realized with metal gates and un-doped fins showing an inverter delay of 13.9ps at a 1.0V supply voltage and 1.9nA off current. This best low-power performance of FinFETs ever reported results from the undoped channels and improved subthreshold characteristics.
Next to the excellent inverter delay, FinFETs provide an extra performance benefit due to their excellent stacked device performance. They allow realizing higher stack heights whereby the same functionality can be implemented with less logic gates resulting in additional area reduction. The potential of FinFETs for large-scale integration has also been demonstrated. To this end, SRAM cells and data path demonstrators with low standby current and good low operating power performance were realized.
The reliability characteristics, both NBTI (negative bias temperature instability) and PBTI (positive bias temperature instability), of the FinFETs have been significantly improved by dielectric passivation based on introducing fluorine into the metal/Hf-based gate stack during gate etching. To this end, IMEC developed a novel, effective and cost-efficient method that requires no extra processing step.
"Although the performance benefits of FinFETs have been recognized for many years, several bottlenecks have to be overcome to bring FinFET technology to manufacturing. These advances have reduced the gap for FinFETs to become a manufacturing technology," said Luc Van den hove, COO IMEC.
These results were obtained in collaboration with IMEC’s (sub-)32nm CMOS research partners: Infineon, Qimonda, Intel, Micron, NXP, Panasonic, Samsung, STMicroelectronics, Texas Instruments, TSMC and Elpida.
Source: IMEC
Related stories:
IMEC increases performance of high-k metal gate planar CMOS and FinFETs
At today’s IEEE International Electron Devices Meeting, IMEC reports significant progress in improving the performance of planar CMOS using hafnium-based high-k dielectrics and tantalum-carbide metal gates targeting the 32nm CMOS node.
IMEC launches industrial affiliation program to develop RF-CMOS for the 45nm era
As part of IMEC’s centralized research platform for sub-45nm CMOS technologies, the new IMEC industrial affiliation program (IIAP) on Analog/RF-CMOS for the 45nm era defines its goals to keep conquering the ITRS challenges. The program aims to develop process modules and device architectures to achieve RF CMOS performance at the 45nm node and to provide the necessary models for active and passive devices. The potential of the technology will be assessed through the benchmarking of circuit demonstrators.
IMEC to create solutions for sub-45nm CMOS scaling
Together with its CMOS core partners, IMEC will announce several research breakthroughs on new gate-stack technologies and multiple-gate FET (MuGFET) devices at the 2005 Symposium on VLSI Technology. A combination of advances in MuGFETs and gate-stack technology paired with lithography improvements also resulted in a new record for a fully working 6-transistor SRAM cell of just 0.274µm
2 in area.
Soitec, ATDF to Develop Multi-Gate Field Effect Transistors (MuGFETs) for 45-nm Technology and Beyond
In an effort to accelerate the development of new-generation transistors, Soitec, today announced its participation as the SOI substrate supplier in a development program led by ATDF -- Advanced Technology Development Facility -- the new independent subsidiary of SEMATECH for advanced semiconductor research and development. Together with two leading semiconductor manufacturers and a number of equipment suppliers and U.S.-based universities, Soitec has been involved for over a year in this advanced R&D program at ATDF, which specializes in services involving technology development, wafer processing, and analytical and electrical testing. The ATDF development program focuses on multi-gate
field effect transistor (MuGFET) technology for the 45-nm node and below. MuGFET is a generic term used to describe a variety of new, multiple-gate field effect transistors, including CMOS FinFETs (FETs with "fin-shaped" transistors) and triple-gate devices.
AMRC Developing Nano-Metrology to Probe Chip Structures at Atomic Level
Engineers at the Advanced Materials Research Center (AMRC) in Austin are investigating a nanoscale approach to metrology that will allow them to examine new semiconductor structures at the atomic level, and so prepare the way for next-generation electronics.
Engineers Achieve Breakthroughs Enabling Implementation of High-k Dielectrics at 45 nm Technology Node
Using a selected set of tools and processes, Sematech engineers have achieved twin breakthroughs in channel mobility and reliability of high-k/metal gate transistors, putting high-k technology for CMOS within reach at the 45 nm technology node.
The Sematech advance involves a titanium nitride (TiN) metal gate on a hafnium silicate (HfSiO) dielectric with an equivalent oxide thickness (EOT) of roughly 10 angstroms (Å), with mobility at 90 percent of the universal mobility curve for silicon dioxide (SiO
2), the historic gate dielectric material. These EOT and mobility metrics meet the 45 nm technology node specifications listed by the International Technology Roadmap for Semiconductors (ITRS).
