It turns out that the most popular form of residential lighting is generally the most inefficient. So inefficient, in fact, that new building codes in California will effectively limit new installation of incandescent recessed fixtures, commonly referred to as "can" lights or "downlights".
The Department of Energy is working to improve the efficiency of can lighting through its Pacific Northwest National Laboratory. PNNL estimates that at least 400 million downlights currently are installed in U.S. homes.
These fixtures are energy hogs because most use inefficient, incandescent bulbs. But that's only part of the problem. They also indirectly lead to energy use by heating the room, which adds to air conditioning loads. And, since many are not airtight, recessed downlight fixtures can also allow heated or cooled air to escape into attic spaces.
"The widespread use of recessed cans and their inefficiency means there is a huge opportunity to reduce energy use and operating costs by using efficient compact fluorescent lamps and redesigning fixtures," said Jeff McCullough, senior research engineer at PNNL.
"Use of CFLs alone could cut the number of watts each fixture uses by two-thirds," said McCullough. "In addition to efficient lamps, we're going to need more efficient fixtures in the market to meet California and other residential building code requirements for hard-wired, pin-based CFLs." Pin-based CFLs plug into a fixture, meaning screw-in incandescent bulbs are not an option. The California code takes effect in October 2005.
Compact fluorescent replacement lamps are cooler and much more energy efficient and airtight fixtures stop the air from escaping to the attic. Both sound like simple fixes, but combining the two creates a technical challenge. Airtight fixtures installed in an insulated ceiling cause heat build-up, which can impair lamp performance and lifespan.
Researchers at PNNL are working with manufacturers to 1) improve performance of reflector-type CFL replacement lamps and 2) redesign fixtures that are hard-wired for CFLs. PNNL's efforts also aim to increase the availability of these products and reduce the cost in the marketplace.
The lab acts as a matchmaker between manufacturers whose products meet certain requirements, and potential large volume buyers. This process, speeds new high quality products to market and allows them to be introduced at more competitive prices. To date, three CFL Reflector lamps have passed PNNL's stringent 6,000 hour elevated temperature life testing procedure. More information on the specific models, produced by Phillips and Feit, can be found at
http://www.pnl.gov/rlamps/ .
"We are just entering the second phase of lamp testing in order to find more reflector lamps which can stand up to the high heat environment of airtight can fixtures" said Linda Sandahl, PNNL's Program Manager for the R-CFL effort.
For the can fixtures themselves, PNNL has performed rigorous testing of hard-wired, airtight fixtures which are rated for use in insulated ceilings, resulting in recommended design changes. The design changes address the effects of heat buildup in insulated ceiling fixtures which can cause the ballast – the component responsible for starting the lamp and maintaining the current – to fail prematurely. The ballast isn't part of the bulb itself, but is usually located above the ceiling and exposed to insulation, making it difficult and even dangerous to replace. PNNL relocated the ballast, taking advantage of cooler adjacent ceiling spaces, lowering the temperatures ballasts are exposed thus extending their lifespan.
PNNL's program which involved long term testing simulating 7 to 8 years of operation, identified five fixtures that met stringent performance requirements.
Building on successes with previous market transformation efforts, PNNL is continuing to work with manufacturers and potential buyers to introduce more high-performing, airtight downlight fixtures that are hard-wired to use energy efficient CFLs.
More information on qualified products is available at
http://www.pnl.gov/cfldownlights/index.html
Source: Pacific Northwest National Laboratory
Related stories:
Flexible OLEDs could be part of lighting's future
(AP) -- On a bank of the Mohawk River, a windowless industrial building of corrugated steel hides something that could make floor lamps, bedside lamps, wall sconces and nearly every other household lamp obsolete. It's a machine that prints lights.
Bright ideas lighting up Grand Central Terminal
New York's Grand Central Terminal may be a grand old National Historic Landmark, but thanks to some modern technology, it's becoming one the most energy efficient buildings in the city.
Freeing light shines promise on energy-efficient lighting
(PhysOrg.com) -- The latest bright idea in energy-efficient lighting for homes and offices uses big science in nano-small packages to dim the future Edison's light bulb.
Standards Set for Energy-Conserving LED Lighting
Scientists at the National Institute of Standards and Technology (NIST), in cooperation with national standards organizations, have taken the lead in developing the first two standards for solid-state lighting in the United States. This new generation lighting technology uses light-emitting diodes (LEDs) instead of incandescent filaments or fluorescent tubes to produce illumination that cuts energy consumption significantly.
Nano scientists to develop next-generation LEDs
Nanotechnology may unlock the secret for creating highly efficient next-generation LED lighting systems, and exploring its potential is the aim of several projects centered at Oak Ridge National Laboratory.
What energy upgrades would you make for $250?
It's a double whammy: Home energy costs are rising just when most of us can least afford it.
Turning Waste Material into Ethanol
(PhysOrg.com) -- Say the word “biofuels” and most people think of grain ethanol and biodiesel. But there’s another, older technology called gasification that’s getting a new look from researchers at the U.S. Department of Energy’s Ames Laboratory and Iowa State University. By combining gasification with high-tech nanoscale porous catalysts, they hope to create ethanol from a wide range of biomass, including distiller’s grain left over from ethanol production, corn stover from the field, grass, wood pulp, animal waste, and garbage.
Shrinking carbon footprints
Would shrinking your carbon footprint, recycling more, and going green be easier if you could monitor your household's environmental impact? That's the question a team of Canadian industry consultants set out to answer. They report their findings in a forthcoming issue of the
International Journal of Environmental Technology and Management from Inderscience Publishers.