Toppan Demonstrates Flexible Electronic Paper Driven by Oxide Semiconductor TFT

Today, TFT arrays for conventional Liquid Crystal Displays use amorphous silicon as the semiconductor and are fabricated on glass using a high temperature process.

Toppan has taken note of amorphous oxide semiconductor TFT developed by Professor Hosono of Tokyo Institute of Technology, because of its processability under room temperature and electrical properties that exceed those of amorphous silicon TFT.

Toppan processed these TFTs on a plastic substrate under room temperature and fabricated a flexible electronic paper display by combining it with an electrophoretic E Ink front plane laminate. This is the first time an E Ink electronic paper display has been driven by an oxide semiconductor TFT array.

This plastic substrate, amorphous oxide semiconductor TFT array is thinner, lighter and more robust than glass substrate TFTs and is flexible. Such mechanical properties bring next generation flexible displays closer to reality.

Toppan plans to develop flexible TFTs with goals to commercialize thin, lightweight and flexible displays such as electronic paper, starting with a practical prototype display in fiscal 2008. In parallel, we aim to introduce printing methods into the fabrication process of flexible TFTs for simplification and cost reduction.

Lightweight and flexible displays are considered a promising next generation product. Especially, with the recent developments in the field of electronic paper, led by electrophoretic displays, there is a heightened need to commercialize lightweight and robust flexible TFTs on plastic substrates.

Conventional flat panel displays, like LCDs are driven by TFTs on glass, processed at high temperature (mainly amorphous silicon TFT, fabricated at over 250 degrees centigrade). On the other hand, such a glass-based TFT array has many disadvantages for electronic paper because it is heavy, fragile and rigid (not flexible).

For this reason, many researchers are developing TFTs using plastic substrates, and because high temperature processes are not possible with plastic substrates, there is a lot of research & development for low or room temperature fabrication processes.

Toppan has been conducting research & development for lightweight and flexible TFTs, and one of our significant achievements was "All-Printed Organic Transistors," announced in November, 2003. This research showed that it was technically possible to fabricate a TFT array using organic semiconductor material and with printing processes only. Many researchers worldwide are working on organic TFT, but most of the printable organic semiconductor materials face technical challenges, including electrical properties of low mobility, small on/off ratio and short lifetime issue etc.

Then in the fall of 2004, researchers led by Professor Hosono of Tokyo Institute of Technology reported flexible TFTs using amorphous oxide semiconductor (a-InGaZnO) materials (Nomura et al, Nature 432, 488 (2004)). Toppan took note of this new approach and launched a research and development program using this amorphous oxide semiconductor material. This oxide semiconductor material is room temperature processable and has better electrical properties compared to conventional amorphous silicon semiconductors. It is also possible to apply printing processes for the TFT electrodes using printable metal pastes.

Source: Toppan

See-through transistor fabricated for future e-displays
Scientists have recently taken an important step toward the development of “see-through” flexible electronic displays by fabricating fully transparent, high-speed nanowire transistors. This piece of circuitry, the first transistor to demonstrate full transparency, could help turn ideas such as e-paper, displays on sunglasses, and maps on car windshields into a reality.
Organic micro-sensors provide quick, convenient medical diagnostics at home
In an effort to bring health monitoring to the patient, scientists from the University of Arkansas have developed a micro-sensor that monitors vital signs and can be incorporated into smart fabrics for wearable illness prevention. With this “point-of-care” testing, physicists Soyoun Jung, Taeksoo Ji and Vijay Varadan are making it possible for the continuous monitoring of signs including respiration, heart rate, ECG, and body temperature outside the doctor’s office.
Flexible OLEDs could be part of lighting's future
(AP) -- On a bank of the Mohawk River, a windowless industrial building of corrugated steel hides something that could make floor lamps, bedside lamps, wall sconces and nearly every other household lamp obsolete. It's a machine that prints lights.
IBM Develops Computational Scaling Solution for Next Generation '22nm' Semiconductors
In response to ever increasing demands for smaller, more powerful and energy-efficient devices for cloud computing and high-performance servers, IBM today announced the semiconductor industry's first computationally based process for production of next generation 22nm semiconductors. Known as Computational Scaling (CS) -- a process that enables the production of complex, powerful and energy-efficient semiconductors at 22nms and beyond -- this new initiative will feature support from several of IBM's key partners initially including Mentor Graphics and Toppan Printing.
Bottoms up: Better organic semiconductors for printable electronics
Researchers from the National Institute of Standards and Technology and Seoul National University have learned how to tweak a new class of polymer-based semiconductors to better control the location and alignment of the components of the blend. Their recent results—how to move the top to the bottom—could enable the design of practical, large-scale manufacturing techniques for a wide range of printable, flexible electronic displays and other devices.
Scientists grow 'nanonets' able to snare added energy transfer
Using two abundant and relatively inexpensive elements, Boston College chemists have produced nanonets, a flexible webbing of nano-scale wires that multiplies surface area critical to improving the performance of the wires in electronics and energy applications.
Toward Plastic Spin Transistors
(PhysOrg.com) -- University of Utah physicists successfully controlled an electrical current using the "spin" within electrons – a step toward building an organic "spin transistor": a plastic semiconductor switch for future ultrafast computers and electronics.
Researchers redefine ultrathin display process
(PhysOrg.com) -- The Flexible Display Center at Arizona State University has developed a new process for manufacturing high-performance flexible displays on transparent plastic.

Toppan Demonstrates Flexible Electronic Paper Driven by Oxide Semiconductor TFT

Related stories:

News discussion: