NASA scientists say a small piece of insulating foam that came off space shuttle Discovery during its Tuesday launch may have struck the orbiter's wing.
But National Aeronautics and Space Administration engineers said they don't believe the foam caused any damage, a NASA official said late Thursday.
Camera footage showed foam about 7 inches long and 2 inches wide separating from the spacecraft's external tank at an altitude of about 200,000 feet toward the wing, Deputy Program Manager Wayne Hale said.
Hale said sensors on the wing didn't detect any impact, but even if the foam did strike the wing, NASA calculations showed the impact would have had about a tenth of the energy necessary to cause damage.
An even larger piece of foam also fell off the tank, but NASA officials don't believe it struck the orbiter, CNN reported. The larger piece was similar to the piece of foam that damaged Columbia's wing in February 2003, eventually causing the shuttle to break up during re-entry killing all seven astronauts aboard.
NASA experts are expected to develop a "fly-home as-is recommendation or a repair recommendation, as required," Hale said.
Copyright 2005 by United Press International
Related stories:
Foam Issues Still Dog Shuttle Launch
Potential problems with the insulating foam covering the main fuel tank continue to occupy a great deal of time for and attention by NASA's space shuttle mission managers enough so that the orbiter's prospects for launch during its window in May remain uncertain.
Foam removed for May shuttle launch
The next NASA crew to fly a shuttle mission took questions from reporters about their scheduled May liftoff and the dangers since the Columbia tragedy.
UF-developed detectors help guard against foam flaws in shuttle's fuel tank
The engineers who built the massive external fuel tank that will power the shuttle Discovery into orbit this spring used sophisticated X-ray detectors developed by UF researchers to reduce the chance of a defect in the foam insulation covering the tank. The detectors, first invented as a new technology to find land mines, can identify tiny gaps, or air-filled voids, in the insulating foam without causing any damage. It is believed that such a gap – possibly located between the foam and the tank's surface – caused a suitcase-sized piece of foam to break off during Columbia's liftoff in January 2003. The chunk struck the edge of the shuttle's left wing, seriously damaging it and spurring the shuttle's destruction during re-entry on Feb. 1.
NASA asks Lehigh engineering students to analyze debris from failed Columbia shuttle
Materials science class will use light microscopy to examine 50 pieces recovered on ground
Every year, seniors in Lehigh University's Failure Analysis course peer through microscopes to learn the variety of ways in which different materials deform and crack.
They apply their new skills to specimens from machines, factories and buildings that have been damaged in real-life situations.
NASA Puts External Camera on Shuttle's Fuel Tank
The space shuttle's external fuel tank, is getting safety upgrades for its spring 2005 flight. Now, a camera will be installed near the nose of the tank to transmit images of the shuttle for about 15 minutes after launch. The camera will stop taking pictures when the external tank is jettisoned. Then a group of NASA officials will review the images and determine how much insulating foam flew off the tank.
Astronaut's diary goes on display in Jerusalem
(AP) -- Pages from an Israeli astronaut's diary that survived the explosion of the space shuttle Columbia and a 37-mile fall to earth are going on display this weekend for the first time in Jerusalem.
RFID unlocks supply chain potential
(PhysOrg.com) -- Radio Frequency Identification (RFID) promises to revolutionise retailing through advanced stock management, sophisticated promotions and supply chain optimisation. But cost-effective solutions have proved elusive because serious technical and business hurdles exist. Few efforts have addressed the problems in a consistent way.
Engineering students: Headset muffles loud, unnerving MRI noises
Having an MRI exam, an experience many people describe as stressful and uncomfortable, could soon become a bit more pleasant, thanks to the work of a team of University of Florida engineering students.