Fuel cells: distant dream, but burning with promise

Some day, fuel cells may power your car and exhaust only water and perhaps carbon dioxide. More efficient and cleaner than an internal combustion engine, their emissions will be much lower. They may also run your home without the energy loss of power lines, or even power your laptop or cell phone. But not today or even tomorrow.

"It's unlikely that we will all be using fuel cell cars in 10 years," says Frank DiSalvo, the J.A. Newman Professor of Chemistry and Chemical Biology and co-director of the Cornell Fuel Cell Institute, a team of Cornell researchers from eight faculty research groups.

"The energy infrastructure in the world is so huge that even if you had ideal fuel cells today it would take decades to rebuild the infrastructure. Most people researching energy today expect to have an impact after 2030 or 2040. The role of present research is to put as many options on the table as possible, so that we can choose the best ones."

Instead of burning fuel to move pistons and turn wheels, fuel cells chemically decompose the fuel, turning its energy directly into electricity. To do that efficiently and economically, the Cornell team seeks to develop new materials for fuel cell catalysts and membranes.

"We may be the only university program in the country approaching it this way," says Héctor Abruña, the E.M. Chamot Professor of Chemistry and Chemical Biology and co-director of the Fuel Cell Institute.

The ideal cell is one fueled by extremely pure hydrogen with platinum as the catalyst. Hydrogen is difficult and expensive to produce and store, and platinum is just expensive. With hydrocarbon fuels and even everyday-quality hydrogen, impurities literally gum up the works. The catalyst that locks onto hydrogen atoms also locks onto impurities like carbon monoxide or sulfur and won't let go. The surface becomes "poisoned" and can no longer react with fuel.

To find an inexpensive catalyst for hydrocarbon fuels that rejects poisoning, the team is testing vast numbers of possible combinations of two, three or four different elements, much the way pharmaceutical companies test thousands of compounds for biological activity. A device with three or four nozzles equally spaced around a silicon wafer sputters atoms onto its surface. Near any one nozzle you get a predominance of just one element; at the center you get an even combination; and over the rest of the wafer you get every other possible proportion.

The wafer is tested in a special fuel cell in which the electrolyte fluoresces where catalytic activity happens, and Abruña's research group determines the exact chemical composition and molecular structure of the material at that spot. Promising candidates are sent off to industrial partners to test in practical devices.

"It's important to partner with industry because it adds credibility," Abruña says, "so that what we find is not just a curiosity in the lab. Most companies don't really believe what happens in a beaker in academic labs, they have to try it."

So far, the researchers have discovered a very good catalyst for formic acid -- best known as the sting in an ant bite, but cheap to produce and with many industrial uses. Formic acid fuel cells might be used in laptops and cell phones -- lighter and less expensive than batteries and usable far away from the power grid.

There are some moderately good catalysts for methanol but, so far, nothing good for ethanol, the most likely biofuel to be available in the near future. The catch is an extra carbon-carbon bond that's hard to break. Strip off the hydrogen from ethanol without breaking that bond and you get what Abruña calls "very expensive vinegar." The solution may be a two-catalyst process.

Another approach is to make good catalysts more efficient. DiSalvo and Ulrich Wiesner, professor of materials science and engineering, have developed a method of forming metal oxides around a self-assembling plastic so that when the plastic is removed, it leaves a honeycomb of nanoscale pores, offering a vastly larger surface area where fuel and catalyst can interact.

Yet another strategy is to develop membranes that are more stable over a wide range of temperatures and don't leak fuel. Cornell materials chemist Emmanuel Giannelis, the Walter R. Read Professor of Engineering, adds nanoparticles to a polymer membrane, making the membrane stronger -- which means it can be thinner -- and rearranging the pores to make it less permeable to fuel. "We haven't solved the temperature problem, but we haven't made it worse," Giannelis says about the new membranes.

Geoffrey Coates, the Betty R. Miller Professor and associate chair of chemistry and chemical biology, focuses on membranes for alkaline fuel cells, where instead of protons moving from anode to cathode, negative hydroxyl ions move from cathode to anode. "Some catalysts work better in base than in acid," Abruña explains. "It may be easier to find better membranes than better catalysts."

And if new catalysts and membranes don't work out, yet another approach is to change the fuels, using "reformer" technology to extract and purify hydrogen from liquid hydrocarbons to feed into classic fuel cells, or to make biomaterials into new, unconventional fuels for which it might be easier to find good catalysts.

Source: Cornell University

Related stories:

Hydrogen vehicles making impressive progress toward commercialization
A transition to hydrogen vehicles could greatly reduce U.S. oil dependence and carbon dioxide emissions, says a new congressionally mandated report from the National Research Council, but making hydrogen vehicles competitive in the automotive market will not be easy. While the development of fuel cell and hydrogen production technology over the past several years has been impressive, challenges remain. Vehicle costs are high, and the U.S. currently lacks the infrastructure to produce and widely distribute hydrogen to consumers. These obstacles could be overcome, however, with continued support for research and development and firm commitments from the automotive industry and the federal government, concluded the committee that wrote the report.
Fuel from food waste: bacteria provide power
Researchers have combined the efforts of two kinds of bacteria to produce hydrogen in a bioreactor, with the product from one providing food for the other. According to an article in the August issue of Microbiology Today, this technology has an added bonus: leftover enzymes can be used to scavenge precious metals from spent automotive catalysts to help make fuel cells that convert hydrogen into energy.
Oxygen Ions for Fuel Cells Get Loose at Low Temperatures
Seeking to understand a new fuel cell material, a research team working at the National Institute of Standards and Technology (NIST), in collaboration with the University of Liverpool, has uncovered a novel structure that moves oxygen ions through the cell at substantially lower temperatures than previously thought possible. The finding announced this month in Nature Materials may be key to solving fuel cell reliability issues and lead to reduced operating costs in high-performance stationary fuel cells.


Honda starts producing next-generation fuel cell car
Honda Motor Co. on Monday began producing a next-generation fuel cell vehicle that it hopes will propel zero-emission cars running on hydrogen closer to the mainstream.
As energy bills soar, Japanese test fuel of future
As world oil prices skyrocket, thousands of households in energy-poor Japan are taking part in an ambitious experiment to use fuel cells to light and heat their homes.
Helicopters with Fuel Cells
The old saying that "there is strength in numbers" also applies to fuel cells. To deliver a high enough power output, a number of cells have to be connected in series. Manufacturers normally stack the fuel cells – a structure consisting of several metal plates, each containing one channel for air and one for hydrogen. This makes the fuel cell stack quite heavy.
Are microbes the answer to the energy crisis?
The answer to the looming fuel crisis in the 21st century may be found by thinking small, microscopic in fact. Microscopic organisms from bacteria and cyanobacteria, to fungi to microalgae, are biological factories that are proving to efficient sources of inexpensive, environmentally friendly biofuels that can serve as alternatives to oil, according to research presented at the 108th General Meeting of the American Society for Microbiology in Boston.
Sharp Achieves the World’s Highest Power Density for Direct Methanol Fuel Cells
Sharp Corp. has achieved the world's highest power density, 0.3W/cc, for direct methanol fuel cells (DMFC) for mobile equipment. This new technology enables efficient power generation from a small cell volume. The use of this technology can make it possible to develop fuel cells that have almost the same volume but a longer continuous-use lifespan than lithium-ion batteries, which are the main type currently in use.

News discussion:

General Science news