Two core technologies developed at the Department of Energy's Pacific Northwest National Laboratory - a fuel desulfurization system and a fuel reforming system - were instrumental in the demonstration of an electric power system operating on JP-8, a fuel commonly used in military operations.
Portable fuel cell power units are quieter, more efficient and have lower emissions than standard diesel generators, but are challenged when used with JP-8 fuel because of its sulfur content. The fuel desulfurization and reforming systems developed at PNNL reduce the sulfur content of JP-8 and generate a hydrogen stream compatible with an integrated fuel cell.
"Running a noisy, hot generator in a war zone is inefficient and can give away your position," said Dale King, project manager at PNNL. "Not running it can leave you without power for communications and other critical systems."
Although currently under development for military use, the desulfurization and reforming technologies can be used with different liquid fuels to provide portable power almost anywhere that small size and high performance are important. Researchers at PNNL are also extending the desulfurization technology for use with diesel fuel.
The fuel cell-centric auxiliary power unit is modular and can be reconfigured for a wide range of uses. Researchers envision the technology being used to supply auxiliary power and heat for long-haul commercial trucks, which would replace the need to run less efficient internal combustion engines while the vehicle is stopped. Battelle, which operates PNNL for DOE, operated a prototype system demonstrating these technologies during the three-day 2007 Fuel Cell Seminar this fall. During the demonstration, an integrated 5-kilowatt electric power system successfully powered area lights and a commercial refrigerator.
A unique catalytic hydrodesulfurization process developed by PNNL removes sulfur from the JP-8 fuel using syngas as the co-reactant in place of hydrogen. Gas phase operation of the process allows for a significant increase in throughput and decrease in operating pressure compared with conventional technology. The process doesn't require consumables or periodic regeneration. The system was developed with funding from the U.S. Army Tank Automotive Research, Development and Engineering Center.
Fuel cells combine hydrogen and oxygen to produce electrical energy with water and heat as by-products. The process is clean, quiet and highly efficient - potentially up to three times more efficient than internal combustion engines. Envisioned benefits include reduced emissions, increased reliability, multi-fuel capability, durability and ease of maintenance.
Source: Pacific Northwest National Laboratory
Related stories:
Oil powered Norway gradually turns into the wind
As Norway prepares for a future after oil, the gale-force potential of harvesting wind power off its long coastline has become an increasingly attractive proposition.
'Crispy noodle' chemistry could reduce carbon emissions
A new material developed in Manchester, which has a structure that resembles crispy noodles, could help reduce the amount of carbon dioxide being pumped out and drive the next generation of high-performance hydrogen cars.
Smarter electric grid could be key to saving power
(AP) -- The glowing amber dot on a light switch in the entryway of George Tsapoitis' house offers a clue about the future of electricity.
Carnegie Mellon researchers urge development of low carbon electricity
Carnegie Mellon University’s Constantine Samaras and Kyle Meisterling report that plug-in hybrid electric vehicles could help reduce greenhouse gas emissions that fuel global warming, but the benefits are highly dependent on how the electricity system changes in the coming decades.
IBM Debuts New Category of Server for Web 2.0 Computing
IBM introduced today an entirely new category of server uniquely designed to address the technology needs of companies that use Web 2.0-style computing to operate massive data centers with tens of thousands of servers.
Study examines amount of water needed to produce various types of energy
It is easy to overlook that most of the energy we consume daily, such as electricity or natural gas, is produced with the help of a dwindling resource – fresh water. Virginia Tech professor Tamim Younos and undergraduate student Rachelle Hill are researching the water-efficiency of some of the most common energy sources and power generating methods.
Panasonic Develops New Fuel Cell Cogeneration System
Panasonic today announced it has developed a home-use polymer electrolyte fuel cell (PEFC) cogeneration system. The cogeneration system features the world's highest power-generating efficiency of up to 39% Lower Heating Value (LHV), durability of 40,000 operation hours and 4,000 start-stop times, and a predicted lifetime of over 10 years.
Ad hoc encyclopaedia for the information age
Linking communities and information into a virtual digital library is the 21st century version of the Dictionaire Raisonneé. Better, they can be organised around specific topics, creating vast repositories and networks of experts around a single problem. Best of all, it can be done on demand.
