Scientists at the U.S. Department of Energy's (DOE) Argonne National Laboratory have developed a technique to peer through high-speed dense liquids using high-energy X-rays from Argonne's Advanced Photon Source (APS).
“The imaging contrast is crisp and we can do it orders of magnitude faster than ever before,” Argonne X-ray Science Division physicist Kamel Fezzaa said.
Fuel injector efficiency and clean combustion is dependent on the best mixture of the fuel and air. To improve injector design, it is critical to understand how fuel is atomized as it is injected. However, standard laser characterization techniques have been unsuccessful due to the high density of the fuel jet near the injector opening. Scientists have been forced to study the fuel far away from the nozzle and extrapolate its dispersal pattern. The resulting models of breakup are highly speculative, oversimplified and often not validated by experiments.
“Research in this area has been a predicament for some time, and there has been a great need for accurate experimental measurement,” Fezzaa said. “Now we can capture the internal structure of the jet and map its velocity with clarity and confidence, which wasn't possible before.”
Fezzaa and his colleagues, along with collaborators from the Mayo Clinic and Visteon Corp. developed a new ultrafast synchrotron X-ray full-field phase contrast imaging technique and used it to reveal instantaneous velocity and internal structure of these optically dense sprays. This work is highlighted in the Advance Online Publication of the journal Nature.
A key to the experiment was taking advantage of the special properties of the X-ray beam generated at the APS. Unlike hospital x-rays, the synchrotron x-rays are a trillion times brighter and come in very short pulses with durations as little as 100 nanoseconds.
“The main challenge that our team had to overcome was to be able to isolate single x-ray pulses and use them to do experiments, and at the same time protect the experimental setup from being destroyed by the overwhelming power of the full x-ray beam,” Fezzaa said.
Their new technique has the ability to examine the internal structure of materials at high speed, and is sensitive to boundaries. Multiphase flows, such as high-speed jets or bubbles in a stream of water, are ideal systems to study with this technique. Other applications include the dynamics of material failure under explosive or ballistic impact, which is of major importance to transportation safety and national security, and material diffusion under intense heat.
Source: Argonne National Laboratory
Related stories:
New knowledge about thermoelectric materials could give better energy efficiency
Thermoelectric materials can be assembled into units, which can transform the thermal difference to electrical energy or vice versa – electrical current to cooling. An effective utilization requires however that the material supplies a high voltage and has good electrical, but low thermal conductivity.
First atomic–scale compositional images of fuel-cell nanoparticles
(PhysOrg.com) -- In a step toward developing better fuel cells for electric cars and more, engineers at MIT and two other institutions have taken the first images of individual atoms on and near the surface of nanoparticles key to the eco-friendly energy storage devices.
Agricultural engineer suggests low-energy alternative to high-temperature grain drying
A little-used grain-drying technique can help farmers control energy costs, according to an Ohio State University agricultural engineer.
Scientists peel away the mystery behind gold's catalytic prowess
Few materials have exercised as much of a hold on the human imagination, or on human history, as has gold. But for all of its popular uses – money, medals, jewelry and more – gold's potential as a catalyst lay hidden until the 1980s, when Masatake Haruta and Graham Hutchings independently discovered that gold, which had long been considered inactive, could be an extraordinarily good catalyst. Haruta demonstrated the low-temperature oxidation of CO and Hutchings the hydrochlorination of acetylene to vinyl chloride.
Putting the Squeeze on Nitrogen for High Energy Materials
(PhysOrg.com) -- Nitrogen atoms like to travel in pairs, hooked together by one of the strongest chemical bonds in nature. By subjecting nitrogen molecules to extreme temperatures and pressures scientists are getting a new understanding of not only nitrogen but other similar molecules, including hydrogen. In the current online edition of
Physical Review Letters, researchers from the Carnegie Institution's Geophysical Laboratory report changes in the melting temperature of solid nitrogen at pressures up to 120 gigapascals (more than a million atmospheres) and temperatures reaching 2,500° Kelvin (more than 4000° Fahrenheit).
Dirty smoke from ships found to degrade air quality in coastal cities
Ah, nothing like breathing clean coastal air, right? Think again. Chemists at UC San Diego have measured for the first time the impact that dirty smoke from ships cruising at sea and generating electricity in port can have on the air quality of coastal cities.
Turning Waste Material into Ethanol
(PhysOrg.com) -- Say the word “biofuels” and most people think of grain ethanol and biodiesel. But there’s another, older technology called gasification that’s getting a new look from researchers at the U.S. Department of Energy’s Ames Laboratory and Iowa State University. By combining gasification with high-tech nanoscale porous catalysts, they hope to create ethanol from a wide range of biomass, including distiller’s grain left over from ethanol production, corn stover from the field, grass, wood pulp, animal waste, and garbage.
DOE JGI Director highlights the genomics of plant-based biofuels in the journal Nature
Genomics is accelerating improvements for converting plant biomass into biofuel—as an alternative to fossil fuel for the nation's transportation needs, reports Eddy Rubin, Director of the U.S. Department of Energy Joint Genome Institute (DOE JGI), in the August 14 edition of the journal
Nature. In "Genomics of cellulosic biofuels," Rubin lays out a path forward for how emerging genomic technologies will contribute to a substantially different biofuels future as compared to the present corn-based ethanol industry—and in part mitigate the food-versus-fuel debate.
