The researchers say that such an adhesive could one day be used to outfit a small robot that could climb up walls.
Taking a cue from the millions of hairs covering a gecko's toes, researchers squeezed 42 million hard plastic microfibers onto each square centimeter of material and loaded it with various weights. They found that on a smooth, clean, vertical surface, two square centimeters of the synthetic adhesive could hold 400 grams (0.88 pounds). At the same time, the adhesive easily lifts off with minimal force and no residue.
Scientists have long marveled at the gravity-defying feats of the gecko, and a number of research teams across the world are working on duplicating the lizard's adhesive forces. Ron Fearing, UC Berkeley professor of electrical engineering and computer sciences and head of the research team developing the new material, notes that previous research on gecko-like adhesives has focused on the strength of the adhesion. He said that the ease of attachment and detachment are equally important when developing a material that can practically be used for scaling vertical walls and ceilings.
What sets this new gecko-inspired adhesive apart from the others created thus far is that it is directional, only "sticking" when it slides along a smooth surface, not when it is pressed down.
"This difference is critical because if you're climbing up vertical surfaces, you can't afford to use a lot of energy pressing down into the surface to stick," said Fearing. "Using force to attach also requires force to detach. A gecko running uphill may be attaching and detaching its feet 20 times a second, so it'd get very tired if it had to work hard to pull its feet off at every step."
The microfibers, made of polypropylene, are 20 microns long, or one-fifth the thickness of a sheet of paper, with a diameter of 0.6 microns, or one-hundredth the diameter of a human hair.
The structure is similar to a microfiber array developed by the same group in 2006. That material relied upon friction to work, however, requiring the application of force to make it stick. Changes made to the plastic backing enabled the directional adhesion reported in this new material to work on truly vertical surfaces.
"For a gecko, this seemingly subtle change could mean the difference between life or death," said Fearing. "With friction only, a gecko would fall from a wall or ceiling. With directional adhesion, a gecko can stop itself from falling because the mechanism works without the need for force that is perpendicular to the surface."
The new research is described in a pair of papers published online Jan. 23 in the Journal of the Royal Society Interface. Members of Fearing's UC Berkeley research team are Jongho Lee, a graduate student in mechanical engineering, and Bryan Schubert, a graduate student in electrical engineering and computer sciences. Co-author Carmel Majidi, a former UC Berkeley graduate student in electrical engineering and computer sciences, is now a post-doctoral researcher at Princeton University.
"This is a major milestone in the new field of gecko-inspired adhesives," said Kellar Autumn, associate professor of biology at Lewis & Clark College in Portland, Ore., who is considered one of the nation's leading experts on gecko movement and who was not a co-author on this latest research. "Fearing's adhesive is made from a plastic that is very hard -- like real gecko protein -- so it is not 'sticky' to the touch. Also, just like what we found in real gecko foot hairs, Fearing's microfiber arrays are sticky only when they slide across a surface. This could be the first real gecko tape."
Fearing and his colleagues are part of a Nanoscale Interdisciplinary Research Team supported by the National Science Foundation and specifically tasked in 2003 with developing synthetic adhesives that perform like gecko hairs.
In 2000, Fearing teamed up with biologists Robert Full at UC Berkeley and Autumn at Lewis & Clark, and engineer Thomas Kenny from Stanford University, in the first study pointing to the secret of gecko adhesion: intermolecular van der Waals forces that remain weak until surfaces get intimately close. Two years later, members of this same team synthesized gecko hair tips that stick, providing the first direct experimental verification of a van der Waals mechanism for gecko foot-hair adhesion.
Not only is each gecko toe covered by millions of tiny hairs, but those hairs are further split at the end into billions of nanoscale spatulae. The van der Waals forces come into play when these spatulae make contact with the surface.
This new material is also an example of a "smart adhesive," becoming stronger with use, said Fearing, who is also part of UC Berkeley's Center for Information Technology Research in the Interest of Society. "More microfibers bend and engage automatically as the weight increases. When the load is removed, the microfibers disengage. This allows for controlled attachment and detachment and is a critical innovation for clean release and reuse. It's the first time this has been demonstrated with a hard microfiber array."
Another benefit to using hard polymers is that the fibers are less prone than softer plastic to collecting dirt after repeated use.
So far, the new adhesive only works on smooth, clean surfaces. The next step, said Fearing, is to develop a material that can also adhere to rough surfaces and that is self-cleaning.
Source: UC Berkeley
Related stories:
Researchers Find Oldest Gecko Fossil Ever Discovered
(PhysOrg.com) -- Scientists from Oregon State University and the Natural History Museum in London have announced the discovery of the oldest known fossil of a gecko, with body parts that are forever preserved in life-like form after 100 million years of being entombed in amber.
Scientists create gecko-inspired bandage
MIT researchers and colleagues have created a waterproof adhesive bandage inspired by gecko lizards that may soon join sutures and staples as a basic operating room tool for patching up surgical wounds or internal injuries.
Synthetic nanoadhesive mimics sticking powers of gecko and mussel
Geckos are remarkable in their ability to scurry up vertical surfaces and even move along upside down. Their feet stick but only temporarily, coming off of surfaces again and again like a sticky note. But put those feet underwater, and their ability to stick is dramatically reduced.
Nanotube adhesive sticks better than a gecko's foot
Mimicking the agile gecko, with its uncanny ability to run up walls and across ceilings, has long been a goal of materials scientists. Researchers at Rensselaer Polytechnic Institute and the University of Akron have taken one sticky step in the right direction, creating synthetic “gecko tape” with four times the sticking power of the real thing.
Engineers create gecko-inspired, high-friction micro-fibers
Inspired by the remarkable hairs that allow geckos to hang single-toed from sheer walls and scamper along ceilings, a team of researchers led by engineers at the University of California, Berkeley, has created an array of synthetic micro-fibers that uses very high friction to support loads on smooth surfaces.
Duct tape that never loses its stick
Gecko feet hold key to development of self-cleaning adhesives
Duct tape that never loses its stick. Bandages that come off without sticky residue or an "ouch." Gecko feet may hold the key to the development of synthetic self-cleaning adhesives, according to a biologist from Lewis & Clark College. The research is published in the January 3, 2005 online early edition of the Proceedings from the National Academy of Sciences of the United States, or PNAS.
Sticky questions tackled in gecko research
Velcro, Superglue and Post-It Notes... Three things that started out as obscure inventions but are now indispensable for everyday life. So what will the next idea to stick with modern society look like? The answer may lie in the tiny toes of a humble lizard, according to a University of Calgary biologist who is trying to figure out how geckos can cling to virtually any surface, including glass.
Flytrap-Inspired Lenses May Lead to New Materials for Adhesives, Optics, Coatings
Imagine paint that adheres to a surface but releases on command, or road signs that change their reflectivity with changing weather conditions. These are two potential uses of a novel, responsive material designed by researchers in the University of Massachusetts Amherst polymer science and engineering department. The research was published online this week in the journal
Advanced Materials.
