A team of researchers headed by Scott X. Mao of the Mechanical Engineering Department of the University of Pittsburgh, working at the National Center for Electron Microscopy (NCEM) at the Department of Energy's Lawrence Berkeley National Laboratory, and using high-quality samples of nickel prepared at DOE's Sandia National Laboratories, has now identified a prominent way in which nanocrystalline metals deform. The researchers report their findings in the July 30, 2004 issue of Science.
Ordinary coarse-grained metals deform when parts of a grain slip past one another as extra planes of atoms, called dislocations, move through the material. The process has been compared to moving a rug by flapping one end of it to create a wave, causing the rug to inch along bit by bit. But the trick won't work if the rug is too short; likewise, if the dimensions of the crystal grains are too small, dislocations can't be created or glide through the grain to allow deformation.
Theorists have proposed that when grain sizes are too small for dislocations, a different mode of deformation comes into play: the grain boundaries themselves move, sliding past one another and allowing the grains to rotate to find new ways of fitting together.
"It's a simple idea," says Zhiwei Shan of Mao's laboratory at Pitt, "and many groups have researched aspects of it, but no one has reported direct evidence of a shift from dislocation-mediated deformation to grain-boundary-mediated deformation." Indeed, no one was sure where to look for the transition from one mode of deformation to the other. When the grains were reduced to 20 nanometers across? Ten? Perhaps as small as five?
To search for the effect, Shan used NCEM's In-Situ Microscope, which he calls "the best in America" for this kind of research. NCEM's Eric Stach explains that what makes the In-Situ's otherwise standard transmission electron microscope unique is that it combines a stage area in which samples can be stressed or manipulated in other ways and meanwhile videotaped with a high voltage, 300-kilovolt electron beam that can penetrate thick samples and yield excellent 1.9-angstrom resolution.
The nanocrystalline nickel samples were mounted in a probe that placed them under load stretched them, in fact while images of small regions of the sample were captured on videotape at the standard rate of 30 frames per second.
But besides having an excellent instrument, says Stach, Zhiwei Shan made a crucial observation. An effect that was far from obvious in the most common TEM imaging method, called bright-field imaging, stood out clearly with the different technique of dark-field imaging.
"As the TEM's electron beam passes through a sample, some of the electrons are diffracted," Stach explains. "Bright-field images are constructed using the direct electrons, while dark-field images use the diffracted electrons. In bright-field imaging, regions of the sample that scatter a lot of electrons, like defects such as dislocations, look darker. With dark-field images, strongly diffracting regions look brighter."
Shan agrees that "dark-field imaging was critical to the result." For when he viewed videotapes of the nickel sample under strain, he saw small regions rapidly brightening and growing larger direct confirmation of grains sliding and rotating into positions of strong diffraction.
In a bright-field image these grain-boundary processes would have been impossible to distinguish from lattice dislocations, which in prior attempts is what other groups assumed they were seeing. It took dark-field observations to confirm that below a certain size, grain-boundary rotation indeed becomes prominent. The cut-off isn't sharp, however.
"It's continuous, not a sharp change," says Shan. "In describing grain-boundary deformations we chose the word 'prominent' carefully, because even in nanocrystalline metal, dislocations still play a role." Trapped dislocations in the crystal lattice were observed even when the average grain size was as small as 10 nanometers.
Says Stach, "The material always chooses the easiest pathway to deform, and that can differ through a range of sizes." Although the In-Situ Microscope observations confirm the grain-boundary model of nanocrystalline deformation, whichever process predominates at a given grain size depends on a variety of conditions.
"Grain boundary-mediated plasticity in nanocrystalline nickel," by Zhiwei Shan, Eric A. Stach, Jörg M. K. Wiezorek, James A. Knapp, David M. Follstaedt, and Scott X. Mao, appears in the July 30, 2004 issue of Science.
The Berkeley Lab is a U.S. Department of Energy national laboratory located in Berkeley, California. It conducts unclassified scientific research and is managed by the University of California.
Source:
Berkeley Lab
Related stories:
A new window into the deformation of nanoscale materials
Materials on the nanoscale don't always have the same properties they would in bulk; for one thing, nanomaterials are often a lot harder. Unlike most bulk materials, a crystal that is small enough can be perfect, free of defects, capable of achieving strength near its ideal theoretical limit.
Atoms under the mantle
French CNRS scientists have succeeded in modelling the defects of the earths mantle responsible for its deformation. These results, obtained using a novel approach which combines numerical calculus and quantum mechanics, constitute the first step towards modelling deformation of this layer and its effects on the mantle. They are published in the March 1st, 2007 issue of
Nature.
Model simulates atomic processes in nanomaterials
Researchers from MIT, Georgia Institute of Technology and Ohio State University have developed a new computer modeling approach to study how materials behave under stress at the atomic level, offering insights that could help engineers design materials with an ideal balance between strength and resistance to failure.
Nanoscience May Produce 'Perfect' Materials
Nanoscience may provide a way to engineer materials that are virtually defect-free perfect, that is.
Extra-large 'atoms' allow Penn physicists to solve the riddle of why things melt
Physicists at the University of Pennsylvania have experimentally discovered a
fundamental principal about how solid materials melt. Their studies have shown explicitly that melting begins at defects within the crystalline structure of solid matter, beginning along the cracks, grain boundaries and dislocations that are present in the otherwise orderly array of atoms. Their findings, which will appear today in the journal
Science, answer longstanding fundamental questions about melting and will likely influence research in physics, chemistry, materials science and engineering, as well as studies of biological importance.
Dietary approaches to stop hypertension
I was doing what any self-respecting dietitian does with friends at the beach ... reading the label on the corn chip bag. I was surprised that this particular brand was lower in sodium than other snack foods I've seen.
How to... remake your breakfast
Many people start their day off wrong by eating foods high in fat, salt and sugar, nutritionists say. Here are some ways to change:
Boulder-sized Asteroid Will Burn Up in Earth's Atmosphere Tonight
(PhysOrg.com) -- A tiny asteroid discovered just hours ago at an Arizona observatory will enter Earth's atmosphere harmlessly at approximately 10:46 p.m. Eastern time tonight (2:46 a.m. Greenwich Mean Time). There is no danger to people or property since the asteroid will not reach the ground. It is between 3 and 15 feet (1-5 m) in diameter and will burn up in the upper atmosphere, well above aircraft heights. A brilliant fireball will be visible as a result.
