Physics professor probes superconductivity

When Eric Hudson was introduced to high-temperature superconductivity as a graduate student, it was still, so to speak, a hot topic.

The phenomenon, discovered in the 1980s, reflects the fact that if you develop the right types of compounds, you can create electrical conductors that are completely resistance-free at temperatures well above the threshold for conventional superconductors.

"With conventional systems, you get to about 25 degrees Kelvin [-415 F] and then plateau," says Hudson, now the Class of 1958 Assistant Professor of Physics at MIT. "With high-temperature superconductivity, you were suddenly at 90 degrees Kelvin."

That figure is well above the mark at which nitrogen gas turns liquid. This meant you could create devices like the high-powered electromagnets used in many MRI scanners without having to use costly liquid helium to cool the magnets' coils to superconducting temperatures. (Helium, which liquefies at a hyper-frigid 4 degrees above absolute zero, is a must for conventional superconducting devices.)

More exciting yet, the discovery seemed to signal that room-temperature superconductivity was on its way. This triggered claims that problems like electricity line -losses--the often-hefty amount of power lost to resistance in electrical transmission networks--would soon -disappear.

But tough technological hurdles dampened hopes of a resistance-free electrical grid. And for physicists like Hudson, the prospect of figuring out how high-temperature superconductivity (HTS) works at the scale of electrons and protons also faded.

"Initially, a ton of people rushed into the field," he notes. "But in the late 1990s, a lot of them got fed up and left."

Hudson was one of them, switching to another challenging physics problem. But the HTS issue continued to lure him, and after two years he resumed his studies of the phenomenon.

Why? Basically because it's so compelling. "It's a very difficult problem," he notes, "and I feel that when we do understand it, that will open up a whole new world, not only in superconductivity but in related systems."

Hudson has probably helped hasten that day. He's an expert in scanning tunneling microscopy, which is based on the stunning fact that by bringing the right type of tiny metal tip within a few atoms' width of a surface, and generating a voltage between the tip and that surface, you can actually map its individual atoms. (To get a notion of the length scales he's dealing with, consider that an atom of copper--a standard component of many HTS compounds--is to a ping pong ball as the ball is to the moon.)

Now, Hudson and his co-workers have contributed an advance in the technology that promises new progress in unveiling HTS's secrets. Given the all-but infinitesimal size of individual atoms, tunneling microscope users until recently haven't been able to track individual atoms within a compound as they lowered the compound's temperature. By tweaking the makeup of a key part of their microscope, though, the MIT group has solved the problem. That matters, says Hudson.

"If you want to understand what's going on as a function of temperature in these materials," he explains, "you need to be able to follow individual atoms."

The group's recent studies have already undercut one popular theory about the changes that affect HTS materials as their temperature falls. That finding may in turn clear the way for competing hypotheses.

Such advances, and the fact that organizations such as the U.S. Department of Energy are again giving priority to the HTS phenomenon, show the field is regaining its momentum. Yet while the world's first-ever HTS electrical transmission line--an underground Albany-area cable cooled by liquid nitrogen--went live on test basis last year, the steps forward so far don't mean dramatic new applications are imminent.

On the other hand, Hudson does think basic research on the HTS phenomenon is making real head way. "Things are at a point now," he says, "where I believe we'll solve this within my professional lifetime."

Source: MIT (Reprinted from MIT SPECTRVM, by Richard Anthony)

Related stories:

Probe to detect spread of breast cancer co-developed by UH scientist
High-temperature superconductors hold the key to a handheld tool for surgeons that promises to be more accurate, cost-effective and safer than existing methods for staging and treating various cancers, including breast cancer.
Superconductivity Project Addresses Urban Power Challenges
Twenty thousand households in suburban Columbus, Ohio, are about to receive electricity through a high temperature superconducting cable developed at the Department of Energy's Oak Ridge National Laboratory.
Studies showcase superconductivity savvy at UH
Four graduate students present award-winning, multidisciplinary work at recent competition

Furthering superconductivity and related research, University of Houston students in science and engineering showcased their original research in a recent campus competition.
Widespread use of high-temperature superconductors on horizon
From improvements in cellular base stations to the development of more efficient electric transmission lines and energy storage systems, high-temperature superconductors (HTS) are nearing their commercial viability.
Two-time University of Houston graduate, Venkat Selvamanickam, will present a special seminar – "Second-generation HTS Conductors" – from 3 to 4 p.m., Monday, May 2, in room 102 of the Houston Science Center at UH. Part of the Texas Center for Superconductivity and Advanced Materials (TcSAM) Special Seminar series, the event is free and open to the public.
Towards commercialization of high-temperature superconductors
As high-temperature superconductors (HTS) enter their third decade, the commercialization of reliable and energy-efficient HTS-technology is close to becoming a reality. This is the conclusion of a series of articles published in the September issue of Nature Materials.
Full speed ahead: High-temperature superconductors ensure efficient propulsion in all-electric ships
Researchers from Siemens have developed a new type of propulsion motor for all-electric ships (AES). The synchronous machine is part of an electric propulsion system based on high temperature superconducting technology (HTS). The HTS engine generates four megawatts of power at a torque of over 300 kilonewton meters. The scientists are presenting the project at the Hannover Messe (April 16 – 20).
Maglev launch assist technology may enable commercial space travel
The same technology used in magnetically levitated ("maglev") trains may give spaceships a low-cost, stable boost for the future of space travel—possibly even for joy rides. A research group from two universities in Beijing, China has constructed a maglev test vehicle that works on a model track made of a permanent magnet-high temperature superconductor (PM-HTS).
Space test for Swiss-designed solar antennas
The rocket's payload will also include a satellite designed and built by students from several European universities, including a group of EPFL students.

News discussion:

Physics news