Power from Formic Acid

One of the central challenges of our time is the supply of enough environmentally friendly and resource-efficient energy to our society. In this context, hydrogen technology has taken on increased importance.

Björn Loges, Albert Boddien, Henrik Junge, and Matthias Beller at the Leibniz Institute of Catalysis in Rostock have now succeeded in the controlled extraction of hydrogen from formic acid—without the need for the high-temperature reforming process usually involved in other hydrogen generation systems. As they report in the journal Angewandte Chemie, this hydrogen source, generated at room temperature, can be directly introduced into fuel cells.

Hydrogen-powered fuel cells are the cleanest source of energy because they only produce one type of exhaust gas: water vapor. However, it is not yet practicable to transport and store hydrogen, which is a gas and cannot be pumped into a tank as easily as gasoline. Storage systems currently in use are large and heavy, expensive, and complex.

It would thus be better to couple the fuel cell directly to a hydrogen-producing material, which would supply the fuel cell on demand. Aside from methane and methanol, renewable resources such as biomass and its fermentation products (e.g. bioethanol) are the most promising starting materials for this technology. The serious disadvantage is that their conversion only works at temperatures above 200 °C, which consumes a significant portion of the energy produced.

The researchers from Rostock have now developed a feasible process for the on-demand release of hydrogen; they produce hydrogen from formic acid (HCO₂H). In the presence of an amine (e.g. N,N-dimethylhexylamine) and with a suitable catalyst (e.g. the commercially available ruthenium phosphine complex [RuCl₂(PPH₃)₂]), formic acid is selectively converted into carbon dioxide and hydrogen at room temperature. A simple activated charcoal filter is enough to purify the hydrogen gas for use in a fuel cell. The use of formic acid for “hydrogen storage” allows the advantages of established hydrogen/oxygen fuel cell technology to be combined with those of liquid fuels. Formic acid is nontoxic and easy to store. Because formic acid can be generated catalytically from CO₂ and biomass-derived hydrogen, the cycle is CO₂ neutral in principle.

Will we be replacing gasoline with formic acid in the future? It is not inconceivable, but initial applications requiring smaller amounts of energy are more probable. “For the use of fuel cells in portable electrical devices,” says Beller, “this nascent formic acid technology opens up new possibilities in the short term.”

Citation: Matthias Beller, Controlled generation of hydrogen from formic acid amine adducts at room temperature and application in H2/O2 fuel cells, Angewandte Chemie International Edition 2008, 47, No. 21, 3962–3965, doi: 10.1002/anie.200705972

Source: Angewandte Chemie

Related stories:

Fuel cells: distant dream, but burning with promise
Some day, fuel cells may power your car and exhaust only water and perhaps carbon dioxide. More efficient and cleaner than an internal combustion engine, their emissions will be much lower. They may also run your home without the energy loss of power lines, or even power your laptop or cell phone. But not today or even tomorrow.
Energy from ceramics
Micro fuel cells are already being acclaimed as an alternative to batteries. However, producing them from hundreds of tiny separate parts is complex and expensive. An alternative is now available: ceramic fuel cells that can be manufactured in one piece.
Nano World: Power for soldiers, sat phones
Nanotechnology-based power sources are expected to emerge in the next two years that could dramatically reduce the weight that soldiers carry and boost how long satellite phones can last, experts told UPI's Nano World.
Miniaturisation of Fuel Cells Improves Prospects of Technology Commercialisation
To create a compelling microfuel cell technology, scientists have to look at providing power densities that are comparable to that of conventional or rechargeable batteries. Direct methanol fuel cell (DMFC), a popular fuel cell technology, only provides power density in the range of 20 to 50 mille watts per square cm (mW/cm²).
Closing the hydrogen economic loop
The inventor of the nickel metal hydride (NiMH) technology used for building batteries for countless portable electronic gadgets and now hybrid gas-electric cars believes the hydrogen economy is already upon us.
Hydrogen vehicles making impressive progress toward commercialization
A transition to hydrogen vehicles could greatly reduce U.S. oil dependence and carbon dioxide emissions, says a new congressionally mandated report from the National Research Council, but making hydrogen vehicles competitive in the automotive market will not be easy. While the development of fuel cell and hydrogen production technology over the past several years has been impressive, challenges remain. Vehicle costs are high, and the U.S. currently lacks the infrastructure to produce and widely distribute hydrogen to consumers. These obstacles could be overcome, however, with continued support for research and development and firm commitments from the automotive industry and the federal government, concluded the committee that wrote the report.
Fuel from food waste: bacteria provide power
Researchers have combined the efforts of two kinds of bacteria to produce hydrogen in a bioreactor, with the product from one providing food for the other. According to an article in the August issue of Microbiology Today, this technology has an added bonus: leftover enzymes can be used to scavenge precious metals from spent automotive catalysts to help make fuel cells that convert hydrogen into energy.
Hydrogen generation without the carbon footprint
A greener, less expensive method to produce hydrogen for fuel may eventually be possible with the help of water, solar energy and nanotube diodes that use the entire spectrum of the sun's energy, according to Penn State researchers.

News discussion:

General Science news