Hydrogen Storage for Cars?

Hydrogen is the fuel of the future. Unfortunately, one problem remains: Hydrogen is a gas and cannot easily be pumped into a tank like gasoline. Storage in the form of solid hydrides, chemical compounds of hydrogen and a metal or semimetal, are good storage materials in principle, but have not been well suited to automotive applications.

An American research team at the Ford Motor Company in Dearborn and the University of California, Los Angeles, has now developed a novel hydride that could be a useful starting point for the development of future automotive hydrogen-storage materials.

As Jun Yang and his team report in the journal Angewandte Chemie, an “autocatalytic” reaction mechanism causes the composite made of three different hydrides to rapidly release hydrogen at lower temperatures and without dangerous by-products.

Certain hydrogen compounds, such as lithium borohydride (LiBH₄ ) and magnesium hydride (MgH₂), can release hydrogen and then take it up again. However, for automotive applications, they require temperatures that are too high to release hydrogen, the hydrogen release and uptake are far too slow, and decomposition reactions release undesirable by-products such as ammonia.

In addition, these compounds can only be “recharged” under very high pressure and temperature conditions. The combination of two different hydrides (binary hydride) has previously been shown to improve things, as these compounds partly release hydrogen at lower temperatures than either of the individual components.

The researchers led by Yang went a step further and combined three hydrogen-containing compounds—lithium amide (LiNH₂), lithium borohydride, and magnesium hydride—in a 2:1:1 ratio to form a ternary hydride. This trio has substantially better properties than previous binary materials.

The reason for this improvement is a complex sequence of reactions between the various components. The first reactions begin as soon as the starting components are ground together. Heating starts off more reactions, releasing the hydrogen. The mixture is “autocatalytic”, which means that one of the reactions produces the product cores for the following reaction, which speeds up the entire reaction sequence.

The result is a lower desorption temperature; the release of hydrogen begins at 150 °C.

In addition the hydrogen is very pure because neither ammonia nor any other volatile decomposition products are formed. Recharging the ternary hydride with hydrogen can be accomplished under moderate conditions.

Citation: Jun Yang, A Self-Catalyzing Hydrogen Storage Material, Angewandte Chemie International Edition, doi: 10.1002/anie.200703756

Source: Angewandte Chemie

Related stories:

Closing the hydrogen economic loop
The inventor of the nickel metal hydride (NiMH) technology used for building batteries for countless portable electronic gadgets and now hybrid gas-electric cars believes the hydrogen economy is already upon us.
Improved Ion Mobility Is Key to New Hydrogen Storage Compound
A materials scientist at the National Institute of Standards and Technology has deciphered the structure of a new class of materials that can store relatively large quantities of hydrogen within its crystal structure for later release. The new analysis may point to a practical hydrogen storage material for automobile fuel cells and similar applications.
Hydrogen storage in nanoparticles works
Dutch chemist Kees Baldé has demonstrated that hydrogen can be efficiently stored in nanoparticles. This allows hydrogen storage to be more easily used in mobile applications. Baldé discovered that 30 nanometre particles of the metal hydride sodium alanate make the favourable extraction and storage of hydrogen possible.
Researchers solve decade-old mystery of hydrogen storage material
Environmentally friendly hydrogen gas fueled vehicles can dramatically reduce greenhouse gas emissions and lessen the country’s dependence on sources of fossil fuel. Though several hydrogen vehicles exist on the market today, there is still much room for improvement in the way that hydrogen is stored on-board the vehicle. With current technologies, hydrogen gas storage tanks have to be as large as or larger than the trunk of a car to carry enough gas to travel only one to two hundred miles.
New form of compound stimulates research on hydrogen storage
Research on hydrogen-fueled cars may be one step closer to application thanks to a new form of hydride discovered by scientists at the ESRF. The material, lithium borohydride, is a promising energy storage system: it contains 18 weight percents of hydrogen, which makes it attractive for use in hydrogen-fueled cars. Its drawback is that it only releases hydrogen at quite high temperatures (above 300 degrees C).
Scientists discover new way to make water
In a familiar high-school chemistry demonstration, an instructor first uses electricity to split liquid water into its constituent gases, hydrogen and oxygen. Then, by combining the two gases and igniting them with a spark, the instructor changes the gases back into water with a loud pop.
New engineering model advances prospect of alternative-fuel vehicles
Researchers at the UCLA Henry Samueli School of Engineering and Applied Science have developed a model that could help engineers and scientists speed up the development of hydrogen-fueled vehicles by identifying promising hydrogen-storage materials and predicting favored thermodynamic chemical reactions through which hydrogen can be reversibly stored and extracted.
Invention could solve 'bottleneck' in developing pollution-free cars
Hydrogen-powered cars that do not pollute the environment are a step closer thanks to a new discovery which promises to solve the main problem holding back the technology. Whilst hydrogen is thought to be an ideal fuel for vehicles, producing only water on combustion, its widespread use has been limited by the lack of a safe, efficient system for onboard storage.

News discussion:

General Science news