The research, scheduled to be published in late March in the
Journal of the American Chemical Society, could lead to a hydrogen fuel that powers not only cars, but laptop computers, cellular phones, digital cameras and other electronic devices as well.
"We have a class of materials in which we can change the components nearly at will," said Omar Yaghi, UCLA professor of chemistry, who conducted the research with colleagues at the University of Michigan. "There is no other class of materials where one can do that. The exciting discovery we are reporting is that, using a new material, we have identified a clear path for how to get above seven percent of the material's weight in hydrogen."
The materials, which Yaghi invented in the early 1990s, are called metal-organic frameworks (MOFs), pronounced "moffs," which are like scaffolds made of linked rods -- a structure that maximizes the surface area. MOFs, which have been described as crystal sponges, have pores, openings on the nanoscale in which Yaghi and his colleagues can store gases that are usually difficult to store and transport. MOFs can be made highly porous to increase their storage capacity; one gram of a MOF has the surface area of a football field! Yaghi's laboratory has made more than 500 MOFs, with a variety of properties and structures.
"We have achieved 7.5 percent hydrogen; we want to achieve this percent at ambient temperatures," said Yaghi, a member of the California NanoSystems Institute. "We can store significantly more hydrogen with the MOF material than without the MOF."
MOFs can be made from low-cost ingredients, such as zinc oxide -- a common ingredient in sunscreen -- and terephthalate, which is found in plastic soda bottles.
"MOFs will have many applications. Molecules can go in and out of them unobstructed. We can make polymers inside the pores with well-defined and predictable properties. There is no limit to what structures we can get, and thus no limit to the applications."
In the push to develop hydrogen fuel cells to power cars, cell phones and other devices, one of the biggest challenges has been finding ways to store large amounts of hydrogen at the right temperatures and pressures. Yaghi and his colleagues have now demonstrated the ability to store large amounts of hydrogen at the right pressure; in addition, Yaghi has ideas about how to modify the rod-like components to store hydrogen at ambient temperatures.
"A decade ago, people thought methane would be impossible to store; that problem has been largely solved by our MOF materials. Hydrogen is a little more challenging than methane, but I am optimistic."
Yaghi, 41, has reason to be optimistic since only a handful of MOFs have been tested for hydrogen storage thus far. This is not unreasonable given that MOFs are composed of an inorganic component -- a metal oxide -- and an organic component; he can control their assembly into new structures nearly at will.
How would hydrogen work in devices like cell phones, laptop computers and digital cameras?
"Instead of a battery, one would have a medium such as MOF that stores hydrogen and releases it into a fuel cell," he said.
Yaghi, whose research overlaps chemistry, materials science and engineering, has long been interested in making materials in a rational way.
"When I started out in chemistry, I always thought it should be possible to take two well defined molecules as building blocks and stitch them together into a predetermined chemical structure -- almost like you produce a blueprint of the structure ahead of time and then find the right building blocks necessary to build it. In this way, one can control the structure and the composition. This approach was difficult to implement at the beginning, but is not so difficult at this stage."
Hydrogen, when burned, produces only water, which is harmless to the environment, Yaghi noted. With MOFs, hydrogen is physically absorbed, and it is easy to take the hydrogen out and put it back in without much energy cost, he said.
"The challenge has been, how do you store enough hydrogen for an automobile to run for 300 to 400 miles without refueling?" Yaghi asked. "You have to concentrate the hydrogen into a small volume without using high pressure of very low temperature.
"Our idea was to create a material with pores that attract hydrogen, making it possible to stuff more hydrogen molecules into a small volume," he said.
In previous research, Yaghi and colleagues reported that MOFs also can store large amounts of methane (natural gas).
"We have materials that exceed the DOE requirements for methane, and we think we can apply the same sort of strategy for hydrogen storage," he said.
Additionally, Yaghi has shown that MOFs store prodigious amounts of carbon dioxide at ambient conditions, a development relevant to preventing carbon dioxide emissions from power plants and automobile tailpipes from reaching the atmosphere.
Source: University of California - Los Angeles
Related stories:
Mixed results: Combining scaffold ingredients yields surprising nanoporous structure
With a novel twist on existing techniques used to create porous crystals, University of Michigan researchers have developed a new, high-capacity material that may be useful in storing hydrogen, methane and carbon dioxide.
Chemists design world's lowest-density crystals for use in clean energy
Chemists at UCLA have designed new organic structures for the storage of voluminous amounts of gases for use in alternative energy technologies.
Crystal sponges excel at sopping up CO2
Since the Industrial Revolution, levels of carbon dioxide---a major contributor to the greenhouse effect---have been on the rise, prompting scientists to search for ways of counteracting the trend. One of the main strategies is removing carbon dioxide (CO
2) from the flue exhaust of power plants, using porous materials that take up the gas as it travels up the flue.
New materials for better hydrogen traps
Using building blocks that make up ordinary plastics, but putting them together in a whole new way, University of Michigan researchers have created a class of lightweight, rigid polymers they predict will be useful for storing hydrogen fuel.
The work is described in today's (Nov. 17) issue of the journal
Science.
More Solid than Solid: A Potential Hydrogen-Storage Compound
One of the key engineering challenges to building a clean, efficient, hydrogen-powered car is how to design the fuel tank. Storing enough raw hydrogen for a reasonable driving range would require either impractically high pressures for gaseous hydrogen or extremely low temperatures for liquid hydrogen. In a new paper researchers at the National Institute of Standards and Technology’s Center for Neutron Research have demonstrated that a novel class of materials could enable a practical hydrogen fuel tank.
Novel organic metal hybrids that will revolutionize materials science and chemical engineering
A novel class of hybrid materials made from metals and organic compounds is changing the face of solid state chemistry and materials science just 10 years after its discovery, with applications already in safe storage of highly inflammable gases such as hydrogen and methane. Europe is aiming to capitalise on core strengths in the field and build critical mass by combining the diverse range of skills required within a coherent research network, following a major workshop organised by the European Science Foundation (ESF).
Bigger is not necessarily better -- in hydrogen storage
University of Nottingham scientists have made a breakthrough which could help in the development of the next generation of environmentally-friendly cars. Their latest findings on hydrogen storage could be crucial in the development of hydrogen-powered vehicles that are a viable alternative to the petrol and diesel-powered vehicles of today.
Zinc-based nano-cages store hydrogen
A "cagey" strategy to stack more hydrogen in nanoscale scaffoldings made of zinc-based boxes may yield a viable approach to storing hydrogen and, ultimately, replacing fossil fuels in future automobiles, according to new results from National Institute of Standards and Technology researchers.
