Bolstered by evidence that 193 nm immersion (193i) lithography is here to stay, semiconductor technology leaders have identified the top five critical issues for extending the breakthrough imaging process toward the 32 nm technology generation.
Meeting here recently at the 3rd International Symposium on Immersion Lithography—sponsored by Selete and SEMATECH in cooperation with IMEC—nearly 400 technologists heard presentations showing that 193i is on track for volume manufacturing at sub-65 nm half-pitch, and might be extensible below 40 nm half-pitch with techniques using high refractive index fluids and very high numerical aperture (NA).
In response, the Symposium’s steering committee established the following key challenges for utilizing 193i below 40 nm half-pitch:
1. Development of high-index lens materials
2. Identification of high-index refractive fluids
3. Availability of effective photoresists (including leaching & high index resists)
4. Cost-effective development of double exposure patterning
5. Attainment of low defectivity
“A path forward to half-pitch imaging below 40 nm has been clearly identified—but our ability to get there will depend on how much progress we make in solving these critical issues,” said Michael Lercel, SEMATECH’s Lithography director. “We’ll need to make strategic decisions on high-index materials, double patterning and double exposure to understand the ultimate extensibility of the technology into high-volume manufacturing.”
Key presentations during the Symposium focused on hyper-NA, resists, exposure tools, optical materials, process, photomasks, immersion defects, and alternative immersion fluids. More than 20 percent of submitted papers dealt with immersion defects, revealing the industry’s momentum in preparing 193i for volume manufacturing at sub-65 nm half-pitch. Interest in extending the technology below 40 nm half-pitch was demonstrated by a comparable number of submissions on high-index fluids. Also, many participants appeared convinced that 193i technology could reach and possibly exceed 1.55 NA.
The Symposium was organized by Selete and SEMATECH in cooperation with IMEC. SEMATECH will organize a fourth international Symposium, aimed at accelerating decisions related to the identified critical issues, in October 2007 in the United States.
Related stories:
One virtual step for man, one real leap for mankind
Imagine being able to take a step back in time and walk through the streets of ancient Pompeii hours before the eruption of Vesuvius. In April 2008, European researchers will demonstrate that walking through virtual environments is set to be a reality.
Visual technology enables brain to learn in new ways
New technology at Tufts University's Center for Scientific Visualization is enabling researchers to translate the most abstract, complex scientific concepts into clearer, more precise 3-dimensional images than conventional visualization systems can create.
Jump into the screen with 360-degree immersive video
As you watch a video, have you ever wondered what's happening beyond the camera frame? If you could jump inside the video and look around, you would have a 360-degree view of the world in your TV screen or computer monitor.
AMD, Partners Produce Test Chip Using EUV Lithography
AMD, working together with its research partner, IBM, announced it has produced a working test chip utilizing Extreme Ultra-Violet (EUV) lithography for the critical first layer of metal connections across the entire chip.
Ion-Mask Technology Could Make Waterproof Gadgets Widespread
Using technology developed by the British Defense Department to repel chemicals from soldiers' uniforms, a spin-off company called P2i is fabricating waterproof cell phones and other gadgets. Because the so-called "Ion-Mask" technology is inexpensive and doesn't require extra bulk, P2i hopes that the novel method could launch the mass-production of waterproof gadgets.
ASML Ships TWINSCAN XT:1900i Lithography System for Volume Production
ASML today announced that it has shipped its first TWINSCAN XT:1900i, the world’s only lithography system capable of imaging features down to 36.5 nanometers (nm) on chips manufactured in volume. Production of the XT:1900i is now ramping up fast, as multiple orders have been placed and systems will be shipped before the end of this year to many of the world’s leading device makers.
IMEC advancing state-of-the-art in FinFETs
At this week’s VLSI Symposium, IMEC presents significant progress in the manufacturability, circuit performance and reliability of FinFETs. The results advance FinFET process technology towards being a candidate for the 32nm node and beyond.
Hynix joins IMEC's (sub-)32nm CMOS research platform
Hynix Semiconductor has entered into a strategic partnership with IMEC, Europe’s leading independent nanoelectronics research center, to perform research and development for the (sub)-32nm memory process generations.