Material Changes its Color, Depending on How You Look at It

Looking at the metallic woodboring beetle head-on, the insect appears red. But viewing it from the side, the beetle starts to take on a greenish hue, and then turns completely green at an 80-degree angle. This color-changing feature is called iridescence, and scientists are taking notes from the beetle to design man-made iridescent materials.

The group of researchers, from the University of Namur in Belgium, has recently fabricated iridescent materials that closely mimic the structure and appearance of two species of Coleoptera beetles. By analyzing the underlying physical mechanisms that cause iridescence, the researchers can predict the colors displayed by specific material structures, and, conversely, determine what kind of structural properties are required to display certain colors. With this understanding, they have created a colorful variety of iridescent materials.

“In the context of iridescent materials, the greatest significance of our study is probably the fact that we are discovering new iridescent photonic structures in nature which give us inspiration to synthesize artificial materials whose (nano-) structures are presently out of reach of the human imagination,” lead author Olivier Deparis tells PhysOrg.com.

In a recent issue of the New Journal of Physics, the scientists explain what causes the vivid colors to change based on viewing angle. The beetles in the study (Chrysochroa vittata and Hoplia coerulea) have layers of materials with different thicknesses. When light waves reflect off the different layers at different depths, the light waves interfere. So when you look at a beetle, the color you see is due to the light’s reflection peak off not just one surface, but many surfaces combined. As your viewing angle increases from head-on to a side view, the reflectance peak shifts to shorter wavelengths. That’s why H. coerulea, for example, appears blue head-on, but violet (shorter wavelengths) from larger viewing angles.

Nature’s iridescence is surprisingly diverse. Both beetles – and nearly all animals that exhibit iridescence – use the same bio-material called “chitin“ for achieving a high refractive index, and a combination of air or water for the low refractive index component. Yet, no two species display the same colors. While this great diversity was originally a surprise to scientists, researchers now know that the different layer thicknesses of different species can “tune” the animals’ colors, even if the materials are the same. As Deparis explains, nature’s diversity can offer many benefits for researchers looking to expand the abilities of man-made materials.

“Imagine a graph where the x axis is the degree of complexity of the nano-structure of an iridescent material and the y-axis is the diversity of basic materials which are used to build the nano-structure,” he says. “Natural iridescent materials are mostly characterized by highly complex structures (involving order, disorder, hierachy, etc.) but employ only a few basic materials to realize these complex structures: that's the fascinating power of nature to evolve from basic structures to the most sophisticated and/or optimized ones during millions years of adaptation to the changing environment. In our graphical representation, natural iridescent materials therefore are confined to a region of high x (complexity) and low y (diversity) values.”

On the other hand, Deparis continues, artificial materials are the opposite.

“Due to limitations in both industrial fabrication processes and human imagination, artificial photonic materials are often characterized by rather simple structures but often employ a large set of basic materials – think of the doped-semiconductor industry, for example. In our graphical representation, artificial iridescent materials therefore are confined to a region of low x and high y values. Our bio-inspired approach, in which natural structures are used as templates for the design of artificial ones, allows us to target unexplored regions of both high x and high y values, i.e. to come up with new artificial iridescent materials with more complex nano-structures made of basic materials available in a larger chemical composition range.”

Using the beetles’ nanometer-scale layers as a template, Deparis and his colleagues designed and fabricated iridescent surfaces out of titanium and silicon oxide layers. There were two variables that determined the iridescent properties: the period of the alternating layers, and the layer thickness ratio (one layer being thicker than the other). The period determined the dominant color (the dominant reflected wavelength) at head-on incidence. The layer thickness ratio largely determined what the scientists call “spectral richness,” which is the extent to which the colors change (or the wavelength shifts) when the viewing angle increases.

Based on this understanding, the scientists created iridescent materials that precisely mimick the beetles’ exocuticle coloring. Specifically, C. vittata (the red-to-green beetle) has a layer period of about 200 nanometers, corresponding to its red dominant color. It also has a small layer thickness ratio that causes a fairly large wavelength shift of about 110 nanometers as the viewing angle increases from 20 to 60 degrees. H. coerulea (the blue-to-violet beetle) has a layer period of about 100 nanometers, corresponding to its blue dominant color. Its layer thickness ratio is larger than C. vittata, causing a fairly small wavelength shift of about 20 nanometers over the same viewing angles.

“In the case of the present study, this [bio-inspired] approach is exemplified by the fact that we used two materials [titanium and silicon oxide] which were chosen among a large range of available oxides in order to generate very different iridescent aspects by taking advantage of the complexity,” Deparis says. “Here the complexity was introduced by considering the thicknesses of both layers as free and independent parameters, which is not usually the case in the design of standard multilayer Bragg reflectors.”

The group also developed a model that can predict the reflectance spectrum of an iridescent material at any viewing angle. By tuning the layer thicknesses, the researchers can now fabricate a wide variety of iridescent materials with vivid, changing colors. Iridescent materials could have uses in various industries on large-scale surfaces, which would be an engineering challenge. Another challenge, the researchers explain, may be the deposition of these multilayer films on different substrates, such as flexible polymer foils or curved objects.

“Possible applications of iridescent materials are mainly in art (why not iridescent sculptures!),” says Deparis, “or architecture (glass or metal iridescent panels for decoration), painting (iridescent structural ‘pigments’ in the form of small particles in a solvent), ophtalmic glasses (here, coatings for which the color almost does not change with viewing angle may be interesting, similar to Hoplia coerula).”

More information: Deparis, Olivier, Rassart, Marie, Vandenbem, Cédric, Welch, Victoria, Vigneron, Jean Pol, and Lucas, Stéphane. “Structurally tuned iridescent surfaces inspired by nature.” New Journal of Physics 10 (2008) 013032.

Copyright 2008 PhysOrg.com.
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part without the express written permission of PhysOrg.com.

Related stories:

New plastic is strong as steel, transparent
By mimicking a brick-and-mortar molecular structure found in seashells, University of Michigan researchers created a composite plastic that's as strong as steel but lighter and transparent.
Mother-of-Pearl in Highest Resolution
Mother-of-pearl, also known as nacre, is not just an iridescent substance whose optical characteristics impress the observer and which is often used for jewellery. It is also an excellent material for working with. Nacre consists of 97 percent lime, but has a thousand times higher breaking strength. The reason has to do with the layer composition of mother-of-pearl. Now, Max Planck and BAM scientists have discovered that the surface of the lime platelets in mother-of-pearl is not at all ordered in layers, as had been previously assumed.
The Photonic Beetle: Nature Builds Diamond-Like Crystals For Future Optical Computers
Researchers have been unable to build an ideal “photonic crystal” to manipulate visible light, impeding the dream of ultrafast optical computers. But now, University of Utah chemists have discovered that nature already has designed photonic crystals with the ideal, diamond-like structure: They are found in the shimmering, iridescent green scales of a beetle from Brazil.
Researchers create gold aluminum, black platinum, blue silver
Using a tabletop laser, a University of Rochester optical scientist has turned pure aluminum, gold. And blue. And gray. And many other colors. And it works for every metal tested, including platinum, titanium, tungsten, silver, and gold.
NASA satellite reveals unprecedented view of mysterious 'night-shining' clouds
NASA's AIM satellite has provided the first global-scale, full-season view of iridescent polar clouds that form 50 miles above Earth’s surface.
Nature leads the way for the next generation of paints, cosmetics and holograms
A plant-like micro-organism mostly found in oceans could make the manufacture of products, from iridescent cosmetics, paints and fabrics to credit card holograms, cheaper and ‘greener’.
Next energy technologies may mimic nature
New technologies will play a major role in providing the world's growing population with the energy it will need in the coming decades--that was one of the messages of the MIT Museum's second of three "Soap Box" events devoted to energy.
Fossilized liquid assembly: Nanomaterials research tool
From a butterfly's iridescent wing to a gecko's sticky foot, nature derives extraordinary properties from ordinary materials like wax and keratin. Its secret is hierarchical topology: macroscale structures assembled from microscale components of varying sizes.

News discussion:

Physics news