With a new process that looks to the structure of moth eyes for inspiration, Jiang hopes to address these disadvantages, improving the cost-efficiency of solar cells. “You want more of the sunlight absorbed, rather than reflected,” he says. Jiang and his collaborators, Chih-Hung Sun at the University of Florida, and Bin Jiang at Portland State University, share the results of their work in
Applied Physics Letters: “Broadband moth-eye antireflection coatings on silicon.”
“Right now,” Jiang explains, “the bluish anti-reflective coating you see on solar cells is not very efficient beyond a narrow range.” He says that the wavelengths of light from the sun range from between 400 nm and 1400 nm. “Once you get below about 500 nm, and above 800 nm, reflection starts increasing.” Jiang points out that the optimal efficiency for the current technology works with wavelengths of around 600 nm.
Looking at the way moth eyes are structured gave Jiang and his co-authors an idea. “Moth eyes are not very reflective,” he points out. “We found our inspiration in nature, trying to mimic the natural nanostructure.”
Moth eyes have orderly bumps on their corneas. Jiang refers to these bumps as “nipples.” The nipples are in an array that creates a situation in which almost no reflection exists. While it was most likely an evolutionary defense against nocturnal predators, it can be adapted for use in solar cells, creating a situation in which most of the light from the sun is absorbed and efficiently utilized instead of reflected uselessly.
Jiang says that a method of spin coating is used to create the effect. Nanoparticles in a liquid suspension are placed on a silicon wafer, similar to those used in solar cells. As the wafer is spun, the force created distributes the nanoparticles in the liquid. A sort of mask is created that can be used as a template. Etching is used to transfer the nanoparticle structure onto the silicon wafer beneath.
“It is self-assembling,” Jiang says of the nanoparticle arrangement. “All of the particles are the same size. It’s like when you put glass beads in a box and then shake it. All of the beads arrange themselves into an array pattern.”
In addition to being technologically easy, the process is also inexpensive. “In addition to the inefficiency, these are the two main disadvantages of the current solar cell anti-reflective coating,” Jiang explains. “It is difficult to make, and it is an expensive process.”
Jiang points out that this process creates less than two percent reflection. This is a vast improvement over the 35 to 40 percent reflection rate seen without the anti-reflection coating layers. “This simple, cheaper process is also much more efficient.”
The next step, Jiang says, is manufacturing. “We think it is ready now,” he says. “We are close to a start-up company that could use this process to make solar cells.” And he also hopes to improve upon the design. “Right now, this is done with single crystalline silicon wafers. We hope to extend the technology to work on multi-crystalline silicon, which is where solar cell technology is moving in the future.”
“I don’t see much trouble with it though,” he continues. “Because of the simplicity of the process, there should be no reason it shouldn’t work. There should be no limitation to expansion.”
Copyright 2007 PhysOrg.com.
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part without the express written permission of PhysOrg.com.
Related stories:
An organizer for silicon
Organizers make life easier; aluminum could help the semi-conductor industry to convert silicon from a disordered to an ordered form at low temperatures. This crystalline silicon functions much more efficiently in solar cells, for example. However up to now it has only been possible to manufacture it at high temperatures and it could not therefore be applied to heat-sensitive materials such as plastic or paper.
From moths and cicadas come improvements to solar cells
Designing better solar cells might seem a question of electronics or chemistry, but for one University of Florida engineer, it starts with bugs.
Key to virulence protein entry into host cells discovered
Researchers from the Virginia Bioinformatics Institute (VBI) at Virginia Tech have identified the region of a large family of virulence proteins in oomycete plant pathogens that enables the proteins to enter the cells of their hosts. The protein region contains the amino acid sequence motifs RXLR and dEER and has the ability to carry the virulence proteins across the membrane surrounding plant cells without any additional machinery from the pathogen.
Unique adaptive evolution in snake proteins -- insight into vertebrate physiology
Prior to the advent of large sequence datasets, it was assumed that innovation and divergence at the morphological and physiological level would be easily explained at the molecular level. Molecular explanations for physiological adaptations have, however, been rare.
New technique takes a big step in examination of small structures
A team led by a Purdue University researcher has achieved images of a virus in detail two times greater than had previously been achieved. Wen Jiang, an assistant professor of biological sciences at Purdue, led a research team that used the emerging technique of single-particle electron cryomicroscopy to capture a three-dimensional image of a virus at a resolution of 4.5 angstroms.
Good earth: Chemists show origin of soil-scented geosmin
Brown University chemists have found the origins of an odor – the sweet smell of fresh dirt. In
Nature Chemical Biology, the Brown team shows that the protein that makes geosmin – source of the good earth scent – has two similar but distinct halves, each playing a critical role in making this organic compound.
Nanowire coating for bone implants, stents
University of Arkansas researchers have found a simple, inexpensive way to create a nanowire coating on the surface of biocompatible titanium that can be used to create more effective surfaces for hip replacement, dental reconstruction and vascular stenting. Further, the material can easily be sterilized using ultraviolet light and water or using ethanol, making it useful in hospital settings and meat-processing plants.
Nanowire Coating for Bone Implants, Stents
University of Arkansas researchers have found a simple, inexpensive way to create a nanowire coating on the surface of biocompatible titanium that can be used to create more effective surfaces for hip replacement, dental reconstruction and vascular stenting. Further, the material can easily be sterilized using ultraviolet light and water or using ethanol, making it useful in hospital settings and meat-processing plants.
