Small structure, big impact. Micrometer-fine patterns in surfaces endow components with amazing properties: Plastic dashboards, for example, can be made to look like leather; sharkskin ribs on an aircraft’s fuselage reduce air resistance; micro-recesses in implants improve connection with the bone.
There are many reasons for applying microstructures to workpieces, but actually doing so is by no means easy. While lasers have been used for quite a long time to structure flat surfaces, etching techniques have had to be deployed on three-dimensional components of complex shape - and this involves using large quantities of chemicals.
The research engineers at the Fraunhofer Institute for Production Technology IPT in Aachen have now rendered the laser fit for the third dimension. In the joint “FlexOStruk” project with nine industrial partners, they have developed a machine for near-net-shape laser ablation. This can burn microstructures into free form surfaces. The engineers are presenting the new technology on the Fraunhofer stand (Hall B3, Stand 131). A finished automobile cockpit in luxurious leather-look will demonstrate its potential.
What looks simple today is the result of months of painstaking development work. The laser has to be exactly focused so that the focal point, which is about 10 micrometers wide, works with absolute precision. It is crucial for the laser to hit the surface vertically - otherwise the focus becomes distorted and the sharp microstructure blurs. The challenge was to guide the laser precisely and always at the same distance along the curves. For this purpose the research engineers utilized the attributes of a conventional machine tool. They dismantled the tool spindle - the gripper which normally holds the milling heads - and equipped the machine with a nanosecond laser instead. A scanner controls the precise movement of the laser and lays down the desired pattern on the component. “We have ultimately succeeded in integrating the entire process from the pattern development through to the finished component in our concept,” explains Sascha Bausch, group manager for laser material processing at the IPT.
It is difficult to transfer a pattern to uneven surfaces - as anyone who has tried to wallpaper a curved surface will verify. The Fraunhofer research engineers use special CAD systems to adapt the desired structure to uneven features. The “NCProfiler” software system developed in-house converts the data provided by the scientists into control commands for the laser, the scanner and the machine tool. Working in cooperation with BMW and Siemens, the IPT engineers have already developed initial female tools for plastic injection molding and produced them using this technique. They have thus demonstrated that molds for making leather-look automobile cockpits or attractive mobile phone housings can be structured by this method.
The research engineers are currently working with a nanosecond laser, says Bausch. “Its accuracy is completely adequate for injection molding. What’s more, the laser is so energy-rich that it can achieve relatively high metal-removal rates and thus shorten production times.” This is a decisive factor for the cost efficiency of the process. The engineers intend to achieve even higher precision and even finer structures in future - for optical systems or medical technology, for instance. A further aim is to develop a series-producible machine tool for everyday industrial use.
Source: Fraunhofer-Gesellschaft
Related stories:
New Magnet Design Could Shed Light On Nanoscience
Engineers at Florida State University’s National High Magnetic Field Laboratory have successfully tested a groundbreaking new magnet design that could literally shed new light on nanoscience and semiconductor research.
Carnegie Mellon building robot for lunar prospecting
Researchers in the Robotics Institute of Carnegie Mellon University’s School of Computer Science are building a robotic prospector for NASA that can creep over rocky slopes and then anchor itself as a stable platform for drilling deep into extraterrestrial soils.
Scientists create microscopic alphabet
UCLA scientists have designed and mass-produced billions of fluorescent microscale particles in the shapes of all 26 letters of the alphabet in an “alphabet soup” displaying “exquisite fidelity of the shapes.”
Enter 'Junior': Stanford team's next-generation robot joins DARPA Challenge
When five autonomous vehicles, including the Stanford Racing Team's winning entry "Stanley," finished the 2005 Grand Challenge in the still Nevada desert, they passed a milestone of artificial intelligence. The robots in the 2007 Urban Challenge, however, will have to handle traffic. It is a tougher test that calls for a new generation of technology. Enter "Junior," the Stanford Racing Team's new brainchild.
NASA's Mars Global Surveyor May Be at Mission's End
NASA's Mars Global Surveyor has likely finished its operating career. The orbiter has not communicated with Earth since Nov. 2. Preliminary indications are that a solar panel became difficult to pivot, raising the possibility that the spacecraft may no longer be able to generate enough power to communicate.
Teenager moves video icons just by imagination
Now, a St. Louis-area teenage boy and a computer game have gone hands-off, thanks to a unique experiment conducted by a team of neurosurgeons, neurologists, and engineers at Washington University in St. Louis.
Metal-embedding method helps tiny sensors function in extreme environments
University of Wisconsin-Madison mechanical engineers have developed a method for fabricating "packages" of tiny sensors that measure temperature more accurately than bulk thermocouples. Inserted unobtrusively in critical locations, these metal-embedded micro-thin film thermocouples could more effectively monitor conditions and diagnose problems during manufacturing processes such as injection-molding or die-casting.
Optoelectronic tweezers to round up cells, microparticles
Rounding up wayward cells and particles on a microscope slide can be as difficult as corralling wild horses on the range, particularly if there's a need to separate a single individual from the group.
But now, a new device developed by University of California, Berkeley, engineers, and dubbed an "optoelectronic tweezer," will enable researchers to easily manipulate large numbers of single cells and particles using optical images projected onto a glass slide coated with photoconductive materials.
