Teamwork is what matters – even in the case of solar cells: To obtain sufficient power to operate a pocket calculator, parking ticket dispenser or photovoltaic module, sunlight has to be captured simultaneously by an array of cells. They are connected in series using tiny strips of metal known as stringers.
Each stringer has to be positioned in precisely the right spot, then its solder coating is melted using a hot electrode. When the solder sets, it forms a stable bond with the metallic coating on the silicon. The amount of heat induced in the stringer and the silicon depends on the contact between the soldering electrode and the stringer. Applying too much energy causes thermal stress which in the worst case could destroy the solder joint, leaving a break in the electrical circuit that makes the solar module unfit for use.
Researchers at the Fraunhofer Institute for Laser Technology ILT in Aachen have developed a non-contact soldering system in which the temperature is constantly monitored. If the temperature deviates beyond set limits, the system automatically adjusts it to an acceptable value.
“Instead of an electrode, we use a laser beam for the soldering operation,” says ILT department head Dr. Arnold Gillner. “To melt the solder, we pass a laser beam over the solder-coated stringer. An infrared heat camera derives the temperature of the silicon and of the metal strip from real-time measurements of their emitted radiant heat. If the temperature is too high or too low, a feedback control circuit automatically adapts the laser output within milliseconds.” The system is already in use for industrial surface engineering applications. Solar applications could be on the market in a year or so.
The researchers’ next project is to develop a faster, more reliable method of connecting solar cells by means of laser welding. “Whereas soldering only involves melting the solder, in laser welding the stringer itself is melted,” explains Gillner. This means applying more heat than for soldering, but only for a very short time. “Since the laser is only in contact with the materials for a brief instant, only a small amount of energy is transferred to the materials despite the higher temperature – resulting in even fewer heat-induced defects,” he adds. What complicates the matter is the fact that the stringer has a diameter of about 200 micrometers, whereas the metallic coating on the silicon required to conduct electricity has a thickness of a mere 10 micrometers. The laser beam has to be modulated in such a way that the stringer will melt while leaving the coating on the silicon intact.
Source: Fraunhofer-Gesellschaft
Related stories:
An Unconventional Metal
The semiconductor silicon and the ferromagnet iron are the basis for much of mankind's technology, used in everything from computers to electric motors. In this week's issue of the journal
Nature (August 21st) an international group of scientists, including academic and industrial researchers from the UK, USA and Lesotho, report that they have combined these elements with a small amount of another common metal, manganese, to create a new material which is neither a magnet nor an ordinary semiconductor.
Strange molecule in the sky cleans acid rain, scientists discover
Researchers have discovered an unusual molecule that is essential to the atmosphere's ability to break down pollutants, especially the compounds that cause acid rain. It's the unusual chemistry facilitated by this molecule, however, that will attract the most attention from scientists.
North Pole could lose summer ice
(PhysOrg.com) -- While the summer of 2007 saw record low sea-ice coverage of the Arctic Ocean, a six-year study of the Arctic's sea ice has confirmed its ongoing, massive shrinking and drastic thinning.
Quantum Chaos Unveiled?
(PhysOrg.com) -- A University of Utah study is shedding light on an important, unsolved physics problem: the relationship between chaos theory - which is based on 300-year-old Newtonian physics - and the modern theory of quantum mechanics.
New Technique Reveals Hidden Properties of Ultracold Atomic Gases
(PhysOrg.com) -- Physicists at JILA, a joint institute of the National Institute of Standards and Technology and the University of Colorado at Boulder, have demonstrated a powerful new technique that reveals hidden properties of ultracold atomic gases.
Physicists Explain Why Liquid Optical Fibers Don't Collapse
(PhysOrg.com) -- For several years, physicists have known that liquid columns can be used to guide light. By trapping a light beam, a liquid column can act like an optical fiber, but with a liquid sheathing instead of glass or plastic.
Revolutionary green technology bus
Insight from Oak Ridge National Laboratory, commitment from two Michigan companies and funding from the Department of Energy have led to the commercialization of a lightweight urban transit bus with double the fuel efficiency of conventional hybrid buses.
Bacterial resistance is futile against wound-cleaning laser
A laser-activated antimicrobial offers hope for new treatments of bacterial infections, even those that are resistant to current drugs. Research published today in the open access journal
BMC Microbiology describes the use of a dye, indocyanine green, which produces bacteria-killing chemicals when lit by a specific kind of laser light.
