New fabrication technique yields nanoscale UV LEDs

Researchers at the National Institute of Standards and Technology, in collaboration with scientists from the University of Maryland and Howard University, have developed a technique to create tiny, highly efficient light-emitting diodes (LEDs) from nanowires.

As described in a recent paper, the fabricated LEDs emit ultraviolet light—a key wavelength range required for many light-based nanotechnologies, including data storage—and the assembly technique is well-suited for scaling to commercial production.

Light-based nanoscale devices, such as LEDs, could be important building blocks for a new generation of ultracompact, inexpensive technologies, including sensors and optical communications devices. Ultraviolet LEDs are particularly important for data-storage and biological sensing devices, such as detectors for airborne pathogens. Nanowires made of a particular class of semiconductors that includes aluminum nitride, gallium nitride and indium nitride are the most promising candidates for nanoscale LEDs. But, says NIST researcher Abhishek Motayed, "The current nanowire LEDs are created using tedious nanowire manipulation methods and one-by-one fabrication techniques, which makes them unsuitable for commercial realization."

The NIST team used batch fabrication techniques, such as photolithography (printing a pattern into a material using light, similar to photography), wet etching and metal deposition. They aligned the nanowires using an electric field, eliminating the delicate and time-consuming task of placing each nanowire separately.

A key feature of the new nanowire LEDs is that they are made from a single compound, gallium nitride (GaN). Each LED consists of an "n-type" GaN nanowire placed on the surface of a "p-type" GaN thin film. "N-type" and "p-type" refer to semiconductors with, respectively, an abundance of electrons and an abundance of positively charged electron vacancies called holes. P-n junctions made from the same basic compound yield more efficient LEDs than those made with different compounds, and so can operate at lower power.

When the proper voltage is applied to the junction, it emits light with a peak wavelength of 365 nanometers, which falls squarely in the ultraviolet range. The group produced and tested more than 40 of these LEDs; all showed very similar emission properties. They also displayed excellent thermal stability—withstanding temperatures up to 750 degrees Celsius—and operational stability, showing no signs of deterioration even after two continuous hours of operation at room temperature. These properties indicate that this LED production method yields reliable, stable devices. The researchers say their method could be used to fabricate other nanowire structures as well as applications requiring a large area of nanoscale light sources.

Citation: A. Motayed, A. Davydov, M. He, S. N. Mohammed and J. Melngailis. 365 nm operation of n-nanowire/p-gallium nitride homojunction light emitting diodes. Applied Physics Letters 90, 183120 (2007)

Source: National Institute of Standards and Technology

Related stories:

New Fabrication Technique Yields Nanoscale UV LEDs
Researchers at the National Institute of Standards and Technology (NIST), in collaboration with scientists from the University of Maryland and Howard University, have developed a technique to create tiny, highly efficient light-emitting diodes (LEDs) from nanowires.
Cheaper LEDs from breakthrough in ZnO nanowire research
Engineers at UC San Diego have synthesized a long-sought semiconducting material that may pave the way for an inexpensive new kind of light emitting diode (LED) that could compete with today's widely used gallium nitride LEDs, according to a new paper in the journal Nano Letters.
Advance brings low-cost, bright LED lighting closer to reality
Researchers at Purdue University have overcome a major obstacle in reducing the cost of "solid state lighting," a technology that could cut electricity consumption by 10 percent if widely adopted.
Silicon Light Bulbs to Compete with Fluorescent Bulbs
Thomas Edison invented the light bulb in 1880, and, since the 1920s, the incandescent light bulb has remained largely unchanged. While that's a testament to Edison's ingenuity, it's also a bulb that uses up to 95% of its power to generate heat rather than light.
Tiny avalanche photodiode detects single UV photons
In a significant breakthrough, researchers at Northwestern University’s Center for Quantum Devices (CQD) have demonstrated visible-blind avalanche photodiodes (APDs) capable of detecting single photons in the ultraviolet region (360-200 nm).
Nano scientists to develop next-generation LEDs
Nanotechnology may unlock the secret for creating highly efficient next-generation LED lighting systems, and exploring its potential is the aim of several projects centered at Oak Ridge National Laboratory.
New Nanocoating Is Virtual Black Hole for Reflections
A team of researchers from Rensselaer Polytechnic Institute has created the world’s first material that reflects virtually no light. Reporting in the March issue of Nature Photonics, they describe an optical coating made from the material that enables vastly improved control over the basic properties of light. The research could open the door to much brighter LEDs, more efficient solar cells, and a new class of "smart" light sources that adjust to specific environments, among many other potential applications.
Study looks at blue light-emitting diodes
Japanese scientists have proposed a solution to the puzzle of why blue light-emitting diodes are so bright.

News discussion:

nanoscale UV LEDs in Nanotechnology news