Researchers create a biologically-inspired artificial compound eye

Using the eyes of insects such as dragonflies and houseflies as models, a team of bioengineers at University of California, Berkeley, has created a series of artificial compound eyes.

These eyes can eventually be used as cameras or sensory detectors to capture visual or chemical information from a wider field of vision than previously possible, even with the best fish-eye lens, said Luke P. Lee, the team's principal investigator. Potential applications include surveillance; high-speed motion detection; environmental sensing; medical procedures, such as endoscopies and image-guided surgeries, that require cameras; and a number of clinical treatments that can be controlled by implanted light delivery devices.

They are the first hemispherical, three-dimensional optical systems to integrate microlens arrays – thousands of tiny lenses packed side by side – with self-aligned, self-written waveguides, that is, light-conducting channels that themselves have been created by beams of light, said Lee, the Lloyd Distinguished Professor of Bioengineering at UC Berkeley.

The eyes are fully described for the first time in the April 28 issue of the journal Science.

"I've always wanted to create an advanced, three-dimensional optical system," Lee said, "but conventional microfabrication technology is two-dimensional. So, I started thinking about basing a fabrication system on the developmental stages of insect eyes that I'd learned about as a biophysicist and bioengineer."

What he and his team came up with is a low-cost, easy-to-replicate method of creating pinhead-sized polymer resin domes spiked with thousands of light-guiding channels, each topped with its own lens. Not only are these units packed together in the same hexagonal, honeycomb pattern as in an insect's compound eye, but each is also remarkably similar in size, design, shape and function to an ommatidium, the individual sensory unit of a compound eye.

Just like pins in a pincushion – or a dragonfly's 30,000 ommatidia – the team's artificial ommatidia are each oriented at a slightly different angle. Lee's team has shown that the lenses and waveguides of the artificial eyes focus and conduct light in the same way as an insect's eye.

While an insect's ommatidia each end in a photoreceptor cell that transmits a light signal to the creature's optic nerve, Lee plans to couple his team's ommatidia with CCD photodiodes, the light-capturing units used in digital cameras and camcorders. He also has plans to link them to spectroscopes for chemical detection and analysis.

"The lenses and waveguides are the most important part of the system," Lee said. "People have said that it would be totally impossible to create them with an angle, but now that we've done it, we're ready to integrate imaging or chemical sensing into the eyes."

While conventional microfabrication techniques are expensive and use high temperatures, Lee and his team borrowed from nature, using a low temperature system, photopolymerization, and self-aligning, self-writing technology.

To create the artificial eye, the team first needed to construct a hemispherical mold of the eye's outer layer, a structure consisting of thousands of microlenses. Using existing technology, they made a flat array of these tiny, domed lenses arranged in the hexagonal honeycomb pattern. On top of this, they applied a thin slab of an elastic polymer called polydimethylsiloxane, or PDMS, creating a concave pattern of the lenses in the polymer. By affixing the PDMS membrane over the opening of a vacuum chamber and applying negative air pressure, they pulled it into the dome shapes they needed, controlling its form by using different pressures.

They then had a hemisphere-shaped cup pocked with some 8,700 indentations: a compound-eye mold that could be used over and over again using soft lithography technology, a set of methods developed over the last decade to replicate nanoscale-sized structures.

The material they chose for the artificial eyes was an epoxy resin that cures into a hardened form when exposed to ultraviolet light. They poured the resin into the dimpled molds, baked it at a low temperature just long enough to slightly harden the material, then turned out the contents: little resin hemispheres with a surface packed with 8,700 raised mounds. When struck by a beam of light, each of these mounds acts as a lens, focusing the light and sending it into the material below. Like a welder's torch burning a hole into metal, over time the focused light beams etch holes in the resin creating the tiny channels called self-written waveguides.

Because these channels are formed at the angle of the light beams that strike them, Lee used a condenser lens to bend his light source into a spoke-like pattern of beams that converges on the eye's dome. The end result is that the waveguides pierce the resin at angles that head toward the center of the dome, just like the converging ommatidia of an insect eye.

Because the microlenses create the waveguides, each microlens is perfectly aligned with its waveguide. The self-alignment, self-writing processes are crucial to the creation of the artificial compound eye, said Lee, because these processes will also align the microlenses and waveguides with the pixels of CCDs and spectroscopes.

"Who knows? Maybe this is how insect eyes are created, too," said Lee. "First, there are the lenses, and then as light keeps coming in, they make their own optical paths and connect with the visual system."

Lee speculates that the artificial compound eyes will be put to use within a few years. Their first applications may be in ultra-thin camera phones. After that, he expects to see them used in camcorders for omnidirectional surveillance imaging and such uses as small, hidden, wearable cameras.

Source: University of California - Berkeley

Related stories:

Immaterial display allows viewers to handle 3D images in air
(PhysOrg.com) -- In the future of immersive entertainment, people may not only walk through floating 3D images, but also manipulate the images in thin air. Taking a step toward this reality, researchers have built a prototype of a room-sized 3D immaterial display, demonstrating the possibility of using the technology for a variety of entertainment purposes.
Optics tests for early Alzheimer's diagnosis make significant advances
Providing an update on progress and new findings on his optical tests for the early detection of Alzheimer's disease, Lee Goldstein of Brigham and Women's Hospital and Harvard Medical School will describe dramatic new developments in the technology during a plenary talk at Frontiers in Optics, the annual meeting of the Optical Society of America (OSA) in Rochester, N.Y., which takes place next week.
New Technology Makes Possible Mars Webcam, Battlefield Lasers
It would be a planetary scientist's dream to peer through the eyes of a distant rover’s lenses in real-time, looking around an alien landscape as if she were actually on the planet's surface, but current radio transmitters can’t handle the bandwidth necessary for a video feed across several million miles. New technology recently patented by scientists at the University of Rochester, however, may make applications like a Mars video feed possible, using lasers instead of radio technology. Special gratings inside the glass of a fiber laser virtually eliminate detrimental scattering, the main hurdle in the quest for high-powered fiber lasers.
Submillimeter Eagle Eyes on Mauna Kea
(PhysOrg.com) -- Three observatories on Mauna Kea have come together to form the world's most powerful facility for detailed submillimeter imaging. An exploratory project, the Extended Submillimeter Array (eSMA) will explore the Universe using light that the human eye cannot see, at wavelengths around 0.8 millimeter. There are many objects in the sky that emit radiation in this submillimeter range, especially the dusty regions in which new stars, planets and even entire galaxies are being born. These clouds of gas and tiny dust particles are completely dark in visible light, but submillimeter waves can penetrate them.
Uncovering secrets of life in the ocean: Scientists study how Earth's simplest eyes work
Larvae of marine invertebrates – worms, sponges, jellyfish - have the simplest eyes that exist. They consist of no more than two cells: a photoreceptor cell and a pigment cell. These minimal eyes, called eyespots, resemble the 'proto-eyes' suggested by Charles Darwin as the first eyes to appear in animal evolution. They cannot form images but allow the animal to sense the direction of light. This ability is crucial for phototaxis – the swimming towards light exhibited by many zooplankton larvae. Myriads of planktonic animals travel guided by light every day. Their movements drive the biggest transport of biomass on earth.
Funerary monument reveals Iron Age belief that the soul lived in the stone
(PhysOrg.com) -- Archaeologists in southeastern Turkey have discovered an Iron Age chiseled stone slab that provides the first written evidence in the region that people believed the soul was separate from the body.
Deaths uncounted in China's tainted milk scandal
(AP) -- Li Xiaokai died of kidney failure on the old wooden bed in the family farmhouse, just before dawn on a drizzly Sept. 10.
Super-tough sunshield to fly on the James Webb Space Telescope
Imagine sunglasses that can withstand the severe cold and heat of space, a barrage of radiation and high-speed impacts from small space debris. They don't exist, but Northrop Grumman engineers have created a Sunshield for NASA's James Webb Space Telescope that can withstand all of those elements. The space telescope needs a Sunshield to block heat from the sun so its cameras and instruments can operate properly a million miles from the Earth, when it launches in 2013.

News discussion:

Physics news