Smart brake light system would provide more information to drivers

You are driving in heavy traffic. The brake lights on the car in front of you come on. Is the car slowing or is it going to stop? It slows to 25 mph and the lights go off. You drop back. The car in front of you stops suddenly! You stop just in time. The car behind you collects your rear bumper.

“The problem is that brake lights are yes and no – on and off,” according to John Hennage of Montross, Va., a Ph.D. mechanical engineering student in Virginia Tech’s College of Engineering. “The driver behind does not know the speed at which the car in front is slowing or stopping. The only other signal would be the smoke off the tires.”

The solution is an intelligent brake light system that communicates slowing and urgent stopping – rather than simply that the brake pedal is being touched. “A driver could be tapping his foot in time to music and the brake lights would blink. Or, a driver can rest her foot on the pedal and the lights would glow. It’s not enough information for the following driver,” said Hennage.

With the support of Manassas, Va., businessman Meade Gwinn, Hennage and Virginia Tech Mechanical Engineering Professor Mehdi Ahmadian have invented an intelligent brake light system, which they will show off at the Mid-America Trucking Show at the Kentucky Fair and Exposition Center in Louisville on March 27-29, 2008.

Gwinn came up with the idea for communicating braking speed after being rear ended on Rt. 66 in Northern Virginia. “It was part of a chain reaction accident,” he said. Afterward, he walked down the line of cars to make sure others were okay. “Two cars back was a young woman with a child in the car. They were okay but she kept saying, ‘I couldn’t tell how fast he was stopping.’ I thought, wouldn’t it be a good idea if rear tail lights communicated better and the following driver knew how fast you were stopping so they could take appropriate action?”

Years later, his youngest daughter, a student at Virginia Tech, suggested Gwinn try and get in touch with one of the engineering departments at the university. In 2000, Gwinn wrote to the university president, which led to a meeting with Walter O’Brien, professor and then head of the mechanical engineering department. “He was very helpful and encouraging, saying that this concept had the potential of great application at a very low cost,” Gwinn said. “He subsequently introduced me to Dr. Mehdi Ahmadian, who was able to develop this project into a teaching/research curriculum over the next several years.”

Ahmadian contacted Hennage to help the group of students who were assigned the problem. “I know electricity and had experience programming microcontrollers,” said Hennage, who had previously developed LED lights for commercial trucks, which Ahmadian knew.

The students developed a horizontal light bar. Lights in the middle glow amber for slowing. When stopping speed crosses a threshold to urgent, red lights flash on either side of the amber lights. If deceleration is rapid, all of the lights flash red.

“The draw backs are that the light bar would be an additional brake light because the law forbids altering original equipment,” said John Talerico, a licensing associate with Virginia Tech Intellectual Properties Inc. (VTIP). But the biggest obstacle is that the light bars cost $50 each to produce.”

So in fall of 2007, Ahmadian and Talerico approached Hennage about developing a cheaper unit that does the same thing by tapping into existing lights. “It would be for commercial trucks rather than private cars because commercial vehicles typically have redundant lights,” Hennage said. “Private cars are 10 to 15 years behind commercial vehicles in terms of LED lighting.”

Hennage developed a gravity or deceleration sensor control. Under normal braking – to slow or to stop slowly – the tail lights work in the normal fashion. But under heavy braking, extra lights flash.

“We also have the ability to connect other sensors to the microcontroller, such as from the automatic braking system, the automatic traction control, and the collision avoidance system,” said Hennage. “If any of these systems are activated, lights could flash to alert drivers of nearby vehicles.”

“There are various ways for this invention to work and we have a working prototype,” said Talerico. “A manufacturer can take the specifications and produce this circuit in mass quantities.”

Gwinn said, “Not only is this concept approaching potential commercialization, which will be most gratifying; but the educational benefit derived by numerous mechanical engineering students over the years is very heartwarming to me as well. I have met so many talented and enthusiastic students to have made significant contributions to the concept.

“The real reward to all of us, however, is to know that if this venture works out, millions of drivers will find the roads a much safer place to drive,” Gwinn said. “In the end, we are all winners!”

Source: Virginia Tech, By Susan Trulove

Related stories:

Toward Plastic Spin Transistors
(PhysOrg.com) -- University of Utah physicists successfully controlled an electrical current using the "spin" within electrons – a step toward building an organic "spin transistor": a plastic semiconductor switch for future ultrafast computers and electronics.
Antidepressants may impair driving ability, new research finds
People taking prescription antidepressants appear to drive worse than people who aren't taking such drugs, and depressed people on antidepressants have even more trouble concentrating and reacting behind the wheel.
Researchers help to make cars smarter
Cars already automatically lock doors when they sense motion and turn on warning lights if they detect potential engine problems. But they are about to get smarter.
Hybrid Bus in the City: A Prototype with a Future
Nuremberg’s public transport system has become more "electrified" thanks to a diesel-electric hybrid bus developed by MAN. The vehicle is equipped with drive-system technology from Siemens.
New brake light system could mean fewer collisions
A dynamic brake light system that enables rear lights on a leading vehicle to contract or expand during hard braking could help lessen how often rear-end automobile collisions occur, says new research from the University of Toronto.
Powerful Little Light: LED With 1,000 Lumens
Osram has developed a small light-emitting diode spotlight that achieves an output of more than 1,000 lumens for the first time. That’s brighter than a 50-watt halogen lamp, thereby making the device suitable for a broad range of general lighting applications.
'Hands free' isn't mind free: Performing even easy tasks impairs driving
Do you think using a hands-free device makes it okay to talk on a cell phone while driving? Despite the well-intended laws requiring the use of hands-free devices, a driver's performance is impaired when distracted by even the simplest tasks, whether or not both hands are on the steering wheel.
More Energy Efficient and 'Smart': Solid State Lighting Potential Grows
"Smart" solid-state light sources now being developed not only have the potential to provide significant energy savings, but also offer new opportunities for applications that go well beyond the lighting provided by conventional incandescent and fluorescent sources, according to E. Fred Schubert and Jong Kyu Kim of Rensselaer Polytechnic Institute.
In an article published May 27, 2005 in the journal Science, the authors describe research currently under way to transform lighting into "smart" lighting, with benefits expected in such diverse fields as medicine, transportation, communications, imaging, and agriculture.

News discussion:

Technology news