New Life for Linac

After years of planning and hard work involving teams from every corner of the lab, SLAC's venerable linac has undergone the most radical set of alterations in its 40+ year career. Although a handful of minor tweaks remain, the effort to reconfigure the linac for the Linac Coherent Light Source (LCLS) is now just about complete.

"It's an exciting time and our first experiences have been very positive. We all look forward to the next level," said Paul Emma, head of the LCLS accelerator physics group. "The entire team is very happy with the results, but also glad for a break."

For decades, SLAC's two-mile long linac has enjoyed a resume of superlatives. Add to the list its new role as the injector and accelerator portion of the LCLS, the world's first hard-x-ray free electron laser. Commissioning of the injector portion began last April, and now, not only does the quality of the beam—emittance values, total charge, beam stability, etc.—meet or exceed design expectations, but the electron injector system is considered to be the brightest electron source in the world.

Although still fully capable of providing electron beams for high-energy physics experiments, the newly revved-up linac is now optimized to provide the ultra-fast, ultra-short pulses the LCLS will require. The newly reconfigured linac is specially optimized to create and accelerate the electron beams that will be used to generate the LCLS's powerful x-rays.

Converting the existing linac to an electron injector and accelerator for a free-electron laser was no small task, requiring the expertise of a host of SLAC working groups—including Controls, Alignment, Metrology, Environmental Safety and Health, Rigging, the Accelerator Division, Manufacturing and Purchasing, in addition to dozens of contractors.

"It was truly a site-wide operation," said Operations Manager Kathleen Ratcliffe, who oversaw the initial stages of this year's installation.

Many components, including beam diagnostic modules, magnets and accelerator sections had to be added, removed or shuffled to new locations.

"I called it the linac shuffle because we were moving stuff around and putting new stuff in—it was all spread out. There was a lot of movement," said Operations Manager Greg Diaz, who, along with Ratcliffe, oversaw the final stages of the project during the current shutdown.

Among the most complex of the recent installations was the second of two bunch compressors, or magnet chicanes, designed to shorten the bunch length of each electron pulse. The first such chicane, measuring about 18 feet long, was installed a year ago. The second chicane measures about 75 feet long and comprises enormous quadrupole magnets, each weighing 4,000 pounds, or about as much as a Ford Explorer. The scale of these components is necessary because the beam energy is higher by the time the pulses reach the second chicane. Between the two chicanes, the beam increases in energy from 250 Mev to 4.3 GeV, making the electrons harder to steer and requiring larger magnets.

Now that all of the LCLS-related hardware is in place along the linac, commissioning can continue in anticipation of first light in 2009. Emma says the challenge facing the team now will be to preserve the unprecedented beam brightness through to the Undulator Hall.

Source: by Brad Plummer, SLAC

Related stories:

Forum features update on next-generation particle accelerator
The particle accelerator known as the Energy Recovery Linac (ERL) -- now in planning stages at Cornell -- would open doors to new research in fields from materials science to biochemistry, said Georg Hoffstaetter in a lecture to faculty and staff in Cornell's Research Division, July 31. But if the ERL's scientific scope is wide, he said, its strength would be in shedding new light on the very, very small.
Brightest X-ray Vision at the Nano-scale
Technology-development studies at Cornell University and Jefferson Laboratory are showing how to use the brightest X-ray light ever generated for the scientific examination of everything from human proteins to forged art.
Low-Alpha Mode Increases Possibilities at SSRL
Since the Stanford Synchrotron Radiation Laboratory (SSRL) began experiments in 1973, it has proven to be a bottomless well of scientific discovery. Now, a team of SLAC accelerator physicists is working to add new functionality to the SPEAR synchrotron accelerator. The team—James Safranek, Xiaobiao Huang and Andrei Terebilo—has tested a new "low-alpha mode" for SPEAR that results in shorter x-ray pulses that could be advantageous for some users.
LCLS Beam Already in Action
The Near and Far Experimental halls are still under construction, but already scientists are putting the Linac Coherent Light Source (LCLS) beam to use. The LCLS electron beam, first generated in April, is now traveling from its source near Sector 20, through the Beam Switchyard at the end of the linear accelerator and into End Station A, one of SLAC's original experimental halls.
World's first X-ray free electron laser is on course to completion
Argonne reached another milestone in the design and construction of the Linac Coherent Light Source (LCLS) undulator system.
Laser Acceleration of Electrons Excites Physicists
A new experiment aims to accelerate electrons using dark red light.
'Watching atoms move' is goal of powerful new X-ray sources
When excited, atoms move at impossibly small length and time scales -- too small and too fast to have been observed in years past. But as applied and engineering physics professor Joel D. Brock comments in the Feb. 2 issue of Science, a new generation of X-ray sources is allowing scientists to watch atoms move.
Have Gun, Will Travel (at Light Speed)
The front third of the linac is undergoing an extreme makeover, metamorphosing into a first-of-its-kind hard x-ray free-electron laser, the Linac Coherent Light Source (LCLS). But even with the engineering magic embodied by hi-tech vacuum chambers, magnets, undulators and diagnostic equipment from top labs across the country, the LCLS will stand idle without one final, crucial piece of the puzzle: electrons.

News discussion:

Physics news