“All-optical devices use light instead of electrons to carry information,” co-author Francesca Intonti explained to
PhysOrg.com. “Light has several advantages over electrons. It can travel in a dielectric material at much greater speeds than an electron in a metallic wire. Light can also carry a larger amount of information per second. The bandwidth of dielectric materials is significantly larger than that of metals. Furthermore, photons are not as strongly interacting as electrons, which helps reduce energy losses.”
In their study, Intonti et al. turned the pores of photonic crystals into individual photonic circuits by infiltration of a liquid of a specific refractive index. For the past several years, scientists have been exploiting photonic crystals because of the periodic arrangement of the refractive index that causes light to cancel at some frequencies. This structure results in a band gap, or a range of frequencies where light cannot propagate through the crystal.
By choosing a liquid with a large refractive index, Intonti et al. could introduce a permitted state within the band gap. In their experiment, the scientists used a solution of water and a colored organic dye called Rhodamine 6G (for fluorescence observation).
“In photonic crystals, you can introduce a permitted state in the band gap by intentionally introducing a defect in the otherwise perfect crystal,” said Intonti. “Therefore, in order to create a permitted state in the band gap, we physically introduced the Rhodamine solution in a single pore of the crystal: the infiltrated pore acts as a defect that determines the appearance of a permitted state in the band gap.”
The amount of liquid in a single photonic crystal pore is only about a thousandth of the volume of a droplet used in ink jet printers. In order to work on this scale, the scientists used a microinfiltration system—originally developed for transferring liquid in biological cells—to obtain a positioning precision of 0.1 micrometers. This microinfiltration system, equipped with a combined optical microscope, enabled the scientists to locally tune the refractive index of the crystals, creating an optical version of an electronic circuit.
Because writing each pixel is done by inserting liquid in the pores, Intonti et al. could also erase and rewrite the pixels by removing and replacing the liquid, and/or choosing different pores to fill. To help the liquid enter the tiny pores, the scientists coated the pore walls with a thin layer of silicon oxide (a hydrophilic compound). Then, by adding a chemical to the liquid, the scientists could dissolve the silicon oxide, making a pore hydrophobic, and enabling easy removal of the liquid.
Using their technology for pores as small as 200-600 nm in diameter, the scientists could create different designs of different colors, such as finely controlled waveguides.
“An all optical circuit needs more or less the same elements as an electronic one: e.g. waveguides, filters, amplifiers, switches and so on,” said Intonti. “With this technique, you can realize a large variety of devices: from the simplest—e.g., a point defect can act as a microcavity, or a line defect as a waveguide—to more sophisticated devices like channel drop filters, optical switches, and low threshold lasers. In fact, besides liquids with large refractive indices, with this technique you can infiltrate a local light source—for example, a solution of colloidal quantum dots or liquid crystals in order to externally tune the refractive index.”
The scientists also suggest that, beyond optics, the infiltration technique could enable sensor chips by using a liquid that changes its optical properties with exposure to gas or biological species.
Citation: Intonti, Francesca, et al. “Rewritable photonic circuits.”
Applied Physics Letters 89, 211117 (2006).
By Lisa Zyga, Copyright 2006 PhysOrg.com
Related stories:
Researchers bend light through waveguides in colloidal crystals
Researchers at the University of Illinois are the first to achieve optical waveguiding of near-infrared light through features embedded in self-assembled, three-dimensional photonic crystals. Applications for the optically active crystals include low-loss waveguides, low-threshold lasers and on-chip optical circuitry.
Sol-gel inks produce complex shapes with nanoscale features
New sol-gel inks developed by researchers at the University of Illinois can be printed into patterns to produce three-dimensional structures of metal oxides with nanoscale features.
Chameleon for Optoelectronics
A liquid that changes its color “on demand” and can take on any color of the rainbow one desires?
Simple Magnet Can Control Color of Liquid
University of California, Riverside nanotechnologists have succeeded in controlling the color of very small particles of iron oxide suspended in water simply by applying an external magnetic field to the solution. The discovery has potential to greatly improve the quality and size of electronic display screens and to enable the manufacture of products such as erasable and rewritable electronic paper and ink that can change color eletromagnetically.
Bright future for nanowire light source
A bio-friendly nano-sized light source capable of emitting coherent light across the visible spectrum, has been invented by a team of researchers with the U.S. Department of Energy’s Lawrence Berkeley National Laboratory, and the University of California at Berkeley. Among the many potential applications of this nano-sized light source, once the technology is refined, are single cell endoscopy and other forms of subwavelength bio-imaging, integrated circuitry for nanophotonic technology, and new advanced methods of cyber cryptography.
Microscopic sea creatures provide foundation for gas sensors, other devices
The three-dimensional shells of tiny ocean creatures could provide the foundation for novel electronic devices, including gas sensors able to detect pollution faster and more efficiently than conventional devices.
Fossilized liquid assembly: Nanomaterials research tool
From a butterfly's iridescent wing to a gecko's sticky foot, nature derives extraordinary properties from ordinary materials like wax and keratin. Its secret is hierarchical topology: macroscale structures assembled from microscale components of varying sizes.
Self-Aligning Liquid Crystal Technique Could Simplify Manufacture of Display Devices
A new technique for creating vertical alignment among liquid crystal molecules could allow development of less-costly flexible displays and lead to a better understanding of the factors that govern operation of the popular liquid crystal display systems.
