Mimicking Nature Creates Self-Cleaning Coatings

Researchers at the Georgia Institute of Technology are mimicking one of Nature’s best non-stick surfaces to help create more reliable electric transmission systems, photovoltaic arrays that retain their efficiency, MEMS structures unaffected by water and improved biocompatible surfaces able to prevent cells from adhering to implanted medical devices.

Based on a collaboration of materials scientists and chemical engineers, the research aims to duplicate the self-cleaning surfaces of the lotus plant, which grows in waterways of Asia. Despite growing in muddy conditions, the leaves and flowers remain clean because their surfaces are composed of micron- and nano-scale structures that – along with a waxy coating – prevent dirt and water from adhering. Despite their unusual surface properties, the rough surfaces allow photosynthesis to continue in the leaves.

“When rain hits the leaves of the lotus plant, it simply beads up,” noted C.P. Wong, a Regents Professor in Georgia Tech’s School of Materials Science and Engineering. “When the leaves are also tilted at a small angle, the beads of water run off instantaneously. While the water is rolling off, it carries away any dirt on the surface.”

The self-cleaning action of the lotus plant has intrigued researchers for decades, and recent studies done by researchers in several different groups have demonstrated the reasons behind the plant’s unique abilities.

The plant’s ability to repel water and dirt results from an unusual combination of a superhydrophobic (water-repelling) surface and a combination of micron-scale hills and valleys and nanometer-scale waxy bumps that create rough surfaces that don’t give water or dirt a chance to adhere.

“Because of the combination of nano-scale and micron-scale structures, water droplets can only contact about three percent of the surface,” Wong said. “They’re just not touching very much of the lotus surface as compared to a smooth surface.”

To address several unique applications, Georgia Tech researchers have attempted to duplicate the two-tier lotus surface using a variety of materials, including polybutadiene. But that organic compound isn’t suitable for coatings that are exposed to sunlight because ultraviolet radiation breaks down its carbon bonds. So to address their first lotus application – self-cleaning insulators used on high-voltage power lines – the researchers had to develop another material.

Supported by the National Electric Energy Testing Research and Applications Center (NEETRAC), that project would solve a problem that plagues electric utilities. The build-up of dirt and dust on ceramic or silicone insulators used by high-voltage power lines can eventually create a short circuit that can damage the electric distribution network. It’s impractical to manually clean the insulators.

Wong and collaborators Yonghao Xiu, Lingbo Zhu and Dennis Hess have developed a lotus surface able to withstand ultraviolet radiation using a combination of silicone, fluorocarbons, and inorganics such as titanium dioxide and silicon dioxide. Their prototype coating has shown excellent durability in long-term testing.

Supported by the National Science Foundation, NASA and other agencies, Georgia Tech is also pursuing other work based on lotus applications:

• Use of carbon nanotube bundles to create the surface bumps needed to prevent dust from accumulating on the surfaces of photovoltaic (PV) cells, space suits and other equipment intended for use on the moon or Mars – where there’s no rain. Arranging patterns of nanotube bundles a few microns apart and applying a weak electrical charge should help keep dust away and maintain maximum efficiency in the PV cells that power space missions.

• Application of lotus coatings to prevent “stiction,” which is the strong adhesive force that can form between the structures of micro-electromechanical systems (MEMS) and substrates. The magnitude of these forces can be enough to deform the structures, resulting in device failure. With its superhydrophobicity and surface roughness, a lotus surface coating can prevent stiction, Wong said.

• A two-tier surface system composed of hexagonally-packed silica spheres on which gold nanoparticles were deposited. The resulting chemical and physical structures were studied to establish the impact of surface hydrophobicity and roughness on the measured contact angles on the rough surfaces.

• Lotus surfaces for use in implantable medical devices to prevent cells from attaching to form blood clots. If successful, this application could replace anti-clotting materials that are coated onto implantable devices such as stents used to hold blood vessels open.

The lotus plant is yet another example of how researchers can learn surprising lessons from what Nature has provided, Wong noted.

“It’s not easy to get dust and dirt off a smooth surface,” he said. “Though it seems counterintuitive, the roughness actually helps the cleaning process. We believe this lotus surface will have many potential applications.”

Source: by John Toon, Georgia Institute of Technology

Related stories:

Artificial Lotus Effect: Carbon nanotubes with nanoscopic paraffin coating form superhydrophobic, self-cleaning surfaces
Never wash your car again? Never clean your windows? These may well become reality if it becomes possible to produce the right coatings—coatings that imitate the self-cleaning effect of the lotus blossom.
Self cleaning Lotus leaf imitated in plastic by using a femtosecond laser
A plastic cup that can be reused without washing it, simply because contamination has no chance to stick to the surface? A self-cleaning surface like that of the leaf of a Lotus plant is ideal for many applications and consumer products.
Switchable Lotus Effect
Lotus blossoms are beautiful, and always immaculately clean. Water drops bead up and roll off of their water-repellent surface, washing away every speck of dust. This type of self-cleaning surface would be very useful to us as well: no more carwash, no soiled facades on houses—the potential uses are endless. To date, however, technology has not been able to duplicate nature’s success.
Researchers solve mystery of attractive surfaces
When smooth surfaces that hate water approach each other underwater, scientists have observed that they snap into contact. This is apparently due to attractive forces that extend for tens to hundreds of nanometers.
Magnetism and mimicry of nature hold hope for better medicine, environmental safety
Critical advances in medicine and environmental protection promise to emerge from a new method for biochemical analysis of fluids developed by an international science team led in part by Arizona State University researchers.
Scientists confirm role of nano-hairs in self-cleaning lotus leaf
Today, thousands of buildings boast self-cleaning paint and self-cleaning roofs; self-cleaning textiles, glass windows and sprays have already sprung onto the market. German botanist Wilhelm Barthlott has even owned a patent, copyright and trademark on this self-cleaning phenomenon since 1997. But despite the development of these practical applications, scientists still have a lot to learn about the specific mechanisms behind self-cleaning – or the so-called “Lotus Effect.”
Engineers Find A New Wrinkle in Research
North Carolina State University researchers in the Department of Chemical and Biomolecular Engineering are exploring the possible benefits of wrinkles – how to create them, how to control them and how to use them.
Wrinkles, or buckles, in surfaces are typically considered a major design flaw that destroys the usefulness of the surface. In silicon chips, for example, wrinkled surfaces are a defect that sends a chip to the trash. But in the laboratory of Dr. Jan Genzer, associate professor of chemical and biomolecular engineering, the wrinkle has become the object of exploration for possible uses.
'Bumpy' glass could lead to self-cleaning windows, slick micromachines
Ohio State University engineers are designing super-slick, water-repellent surfaces that mimic the texture of lotus leaves.
The patent-pending technology could lead to self-cleaning glass, and could also reduce friction between the tiny moving parts inside microdevices.
Scientists have long known that the lotus, or water lily, makes a good model for a water-repellent surface, explained Bharat Bhushan, Ohio Eminent Scholar and the Howard D. Winbigler Professor of mechanical engineering at Ohio State. The leaf is waxy and covered with tiny bumps, so water rolls off.

News discussion:

The future countertop.... in Physics news