Water in its purest form is not conductive. Instead, it is the impurities in the water—salts, dust, and so on—that enables it to conduct electricity.
In fact, low conductivity water (LCW)—which is purified and deionized—has been used for decades to cool high-voltage equipment such as magnets and klystrons.
LCW commonly flows through accelerator magnets to cool them. These rectangular, copper or aluminum wires measure up to two inches per side and are coiled in various arrangements to produce magnetic fields of different shapes and strengths. A hole in these copper wires carries LCW to remove heat generated by the electric currents.
"SLAC makes a lot of hot water," said SLAC electrical engineer Martin Berndt, who has designed magnets and power supplies that use LCW at SLAC for over 30 years. "It is a great way of removing heat from high-power electrical devices."
The PEP ring, the SSRL ring and various beam transport lines contain many magnets that use LCW. Unlike hair dryers, the concern with mixing water and electricity in the magnets is not electrocution, but corrosion. Lowering the water's conductivity effectively minimizes this corrosiveness.
Without LCW, the magnets would slowly be eaten away from the inside out and engineers would have to find another way to dissipate as much as 30 megawatts—16,000 hair dryers worth—of power every day.
Source: by Ken Kingery, SLAC Today
Related stories:
Engineers create new gecko-like adhesive that shakes off dirt
(PhysOrg.com) -- Researchers at the University of California, Berkeley, are continuing their march toward creating a synthetic, gecko-like adhesive, one sticky step at a time. Their latest milestone is the first adhesive that cleans itself after each use without the need for water or chemicals, much like the remarkable hairs found on the gecko lizard's toes.
Pocket-sized magnetic resonance imaging
The term “MRI scan” brings to mind the gigantic, expensive machines that are installed in hospitals. But research scientists have now developed small portable MRI scanners that perform their services in the field: for instance to examine ice cores.
NIST/NIH micromagnets show promise as colorful 'smart tags' for magnetic resonance imaging
Colo.-Customized microscopic magnets that might one day be injected into the body could add color to magnetic resonance imaging (MRI), while also potentially enhancing sensitivity and the amount of information provided by images, researchers at the National Institute of Standards and Technology (NIST) and National Institutes of Health (NIH) report. The new micromagnets also could act as "smart tags" identifying particular cells, tissues, or physiological conditions, for medical research or diagnostic purposes.
'NMR on a chip' features magnetic mini-sensor
A super-sensitive mini-sensor developed at the National Institute of Standards and Technology can detect nuclear magnetic resonance (NMR) in tiny samples of fluids flowing through a novel microchip. The prototype chip device, developed in a collaboration between NIST and the University of California, may have wide application as a sensitive chemical analyzer, for example in rapid screening to find new drugs.
Tailoring the ILC
What's the best way to dig a 72 km-long tunnel complex and install it with 2,000 cryomodules, over 13,000 magnets and approximately 540 high-level radio frequency stations? Such is the monumental question the Conventional Facilities and Siting Group (CFS) for the International Linear Collider (ILC) seeks to answer. The Americas division of this global team includes members from SLAC and Fermilab, who work closely with their Asian and European counterparts.
Magnetic Snakes Create Water Current
Physicists at Argonne National Laboratory have found that magnetic particles suspended in water and subjected to an alternating magnetic field will form snake-shaped structures that can control the flow of the surrounding fluid.
Low-Alpha Mode Increases Possibilities at SSRL
Since the Stanford Synchrotron Radiation Laboratory (SSRL) began experiments in 1973, it has proven to be a bottomless well of scientific discovery. Now, a team of SLAC accelerator physicists is working to add new functionality to the SPEAR synchrotron accelerator. The team—James Safranek, Xiaobiao Huang and Andrei Terebilo—has tested a new "low-alpha mode" for SPEAR that results in shorter x-ray pulses that could be advantageous for some users.
Milestone in magnetic cooling
The first milestone in magnetic cooling has been achieved. Between 5 and 10 degrees of cooling – this was the success criteria for the first milestone in a project involving magnetic cooling at Risø National Laboratory – Technical University of Denmark (DTU).
