Making move toward vehicles that morph

Picture a bird, effortlessly adjusting its wings to catch every current of air. Airplanes that could do the same would have many advantages over today's flying machines, including increased fuel efficiency. Now MIT engineers report they may have found a way for structures -- and materials -- to move in this way, essentially morphing from one shape into another.

The discovery could lead to an airplane that morphs on demand from the shape that is most energy efficient to another better suited to agility, or to a boat whose hull changes shape to allow more efficient movement in choppy, calm or shallow waters.

This science-fiction outcome, in the works for 20 years, has been unobtainable with such conventional devices as hydraulics, which aren't practical for a variety of reasons -- from cost to weight to ease of movement.

MIT's work involves a new application of a familiar device: the rechargeable battery. Papers describing the team's progress appeared earlier this year in Advanced Functional Materials and Electrochemical and Solid-State Letters.

Batteries expand and contract as they are charged and recharged. "This has generally been thought to be something detrimental to batteries. But I thought we could use this behavior to another end: the actuation, or movement, of large-scale structures," said Yet-Ming Chiang, the Kyocera Professor in the Department of Materials Science and Engineering (MSE).

Chiang and Professor Steven R. Hall of the Department of Aeronautics and Astronautics led a team that also includes MSE graduate student Timothy E. Chin and postdoctoral associate Yukinori Koyama, aero-astro graduate student Fernando Tubilla and postdoctoral associate Kyung Yeol Song, and three visiting students, Urs Rhyner (from the Swiss Federal Institute of Technology, ETH-Zurich) and Dimitrios Sapnaras and Georg Baetz (University of Karlsruhe, Germany).

Several types of "active" materials are already used to move devices ranging from miniature motors to micropositioners. None, however, "can enable the large-scale structural morphing we've been working toward," Hall said.

For example, some "smart materials" called piezoelectrics can change shape in less than the blink of an eye, but they do so on almost a microscopic level. They wouldn't be capable of moving a wing the distance necessary to affect flight.

Similarly, shape-memory alloys have characteristics useful to large-scale actuation, but they require temperature control to work. "So to make them work you've got to keep them warm and insulate them. And if you insulate them, it takes a long time to cool them down if you want them to return to their original shape," Hall said. Those are not exactly optimum conditions for seamless morphing.

In the quest for materials that would allow such morphing, engineers have recently focused on nature's approach to the problem. A plant that bends toward the light, quickly furls its leaves when touched, or pushes a concrete sidewalk aloft with its roots is essentially moving fluids between cells.

Chiang realized that the solid compounds used to store electrical energy in lithium rechargeable batteries could be made to work in a similar way. The movement of ions to and from these materials during charging and recharging, he thought, was analogous to the moving fluids in plants. Could this be a synthetic counterpart to nature's solution?

To find out, Chiang and Hall began testing commercially available rechargeable batteries of a prismatic form, then designed their own devices composed of graphite posts surrounded by a lithium source. The results were promising.

Among other things, they found that the batteries continued to expand and contract under tremendous stresses, a must for devices that will be changing the shape of, say, a stiff helicopter rotor that's also exposed to aerodynamic forces.

Other key advantages of the approach: The electrically activated batteries can operate at low voltages (less than five volts) as compared to the hundreds of volts required by piezoelectrics. The materials that make up the batteries are also inherently light. "For things that fly, weight is important," Hall said.

The researchers have already demonstrated basic battery-based actuators that can pull and push with large force. Later this year, they hope to demonstrate the shape-morphing of a helicopter rotor blade. The morphing capability should allow for a more efficient design, ultimately making it possible for a vehicle to carry heavier loads. Team members say that other applications, including miniaturized devices for Micro-Electrical-Mechanical Systems (MEMS), may flow from these initial demonstrations.

The researchers emphasize that much work remains to be done, such as refining the design of the battery for optimal operation in a morphing vehicle. Chiang notes, however, that "we've been able to demonstrate the potential of this approach even using these very unoptimized off-the-shelf batteries."

Source: Massachusetts Institute of Technology

Related stories:

Intel CTO Says Gap between Humans, Machines will Close by 2050
Intel Corporation's chief technology officer took a fascinating look at how technology will bring man and machine much closer together by 2050.
'Small' research at MSU leads to advances in energy, electronics
A Michigan State University researcher and his students have developed a nanomaterial that makes plastic stiffer, lighter and stronger and could result in more fuel-efficient airplanes and cars as well as more durable medical and sports equipment.
Improving computer memory, solar cells goal of UH chemist
A high-tech breakthrough in solar cells and flash drives may just come down to good old-fashioned pencil and paper calculations, says an award-winning young chemist at the University of Houston.
More safety for cell phone batteries
Fraunhofer researchers will be presenting a novel lithium-ion battery at Hannover Messe on April 21 - 25. It is based on a polymer electrolyte, which is – unlike the liquid electrolyte in conventional lithium-ion batteries – not inflammable. A test set-up for redox flow batteries will also be on display at the show. This makes it possible to compare different redox systems in a single test set-up.
Nanowire battery holds 10 times the charge of existing ones
Stanford researchers have found a way to use silicon nanowires to reinvent the rechargeable lithium-ion batteries that power laptops, iPods, video cameras, cell phones, and countless other devices.
Backpack straps harvest energy to power electronics
All that rubbing of your backpack straps on your shoulders may be put to good use, now that researchers have designed a novel type of energy harvesting backpack. The pack has straps made of a piezoelectric material that can convert the mechanical strain on the straps into electrical energy that may power or recharge portable electronics.
Jumping robots take clues from nature
A group of mechanical engineers from the University of Bath has a peculiar interest in flying squirrels, fleas, and grasshoppers. Inspired by animals considered to be excellent jumpers, the researchers have designed two jumping robots, one of which demonstrated some of the highest jumps for an autonomously powered robot so far engineered.
'Smart' sunglasses feature lenses that change color on demand
Get ready for the coolest, most colorful shades on the planet: Chemists at the University of Washington in Seattle say they are developing ‘smart’ sunglasses that will allow the wearer to instantly change the color of their lenses to virtually any hue of the rainbow.

News discussion:

Physics news