[Home]   [Full version]  

Scientists Engineer 'Pumped-Up' Materials

Sep 06 ,Physics


Robots with 'roid rage? Responsive prosthetics leading to the Six Million Dollar Man or the Bionic Woman? North Carolina State University scientists have devised new materials that aim to put some serious muscle behind robots or biomedical devices.

The artificial muscle materials are activated by an external electrical field and then change dimensions in specific directions. Besides a pumped-up robot or smart prosthetics, other uses for these materials could be small vehicles that fly or slither into a cave, responsive textiles, steerable catheters, microfluidic or haptic devices such as continuous-action micropumps and refreshable Braille pads and other biomedical applications.

In a paper published in the most recent edition of Advanced Materials, the NC State researchers, Dr. Richard Spontak, professor of chemical and biomolecular engineering and materials science and engineering, Dr. Tushar Ghosh, professor of textile and apparel technology and management, and Ravi Shankar, a doctoral student in fiber and polymer science and materials science and engineering, show that their materials produce a great deal of stretch - or actuation strain - with a greatly reduced electrical field.

"That's important," Spontak says, "because a reduced electric field and high field-induced displacement constitute the holy grail for electrically responsive organic materials targeted for advanced engineering and biomedical applications.

"Our material is a type of electroactive polymer called a dielectric elastomer. There are many different dielectric elastomers currently available, but ours is a blend of a molecularly self-organized polymer - called a block copolymer - and a block-selective oligomer such as mineral oil," Spontak says. "It is attractive because of its low cost, light weight, robust mechanical properties and potential to emulate biological muscle."

"The NC State material also shows a higher electromechanical coupling efficiency - the ability to turn electrical energy into mechanical work - and significantly fewer property changes due to either actuation or mechanical cycling than other tested materials," Ghosh added.

"When an external electric field is applied across the material from compliant electrodes on opposing sides of a film," Ghosh explains, "the active region of the elastomer squeezes together while enlarging laterally. The compression is due to the development of a 'Maxwell stress,' and is the underlying principle by which dielectric elastomers function."

In the paper, results demonstrate that the NC State materials attain actuation strains of about 250 percent on an area basis, and coupling efficiencies greater than 90 percent, which are the highest reported to date in this growing field of smart materials.

"The scientific literature is filled with numerous candidate materials tested for efficacy as artificial muscles. But since the NC State materials are a carefully chosen mixture of different components with specific functions, they can be physically tailored to achieve broadly different performance, giving them remarkable versatility that other, more conventional, electroresponsive materials are not able to match," Spontak adds.

And when the first robotic arm pins a human arm in an arm-wrestling match - it hasn't happened yet, but to some engineers it's akin to computer scientists developing a machine able to defeat a human in chess - the Spontak-Ghosh team wouldn't be surprised if their nanostructured dielectric elastomers provide the muscle behind the victory.

Citation: "Electroactive Nanostructured Polymers as Tunable Actuators", Ravi Shankar, Tushar K. Ghosh and Richard J. Spontak, NC State University, Published: 19, 2218, Sept. 2007, in Advanced Materials

Source: North Carolina State University

Related stories:

Grow your mobile in a pot? Maybe someday, say Nokia researchers
With a mobile phone you can make calls on the go, shoot photos and pinpoint your position on a map. And who knows, maybe one day you'll be able to grow your phone in a pot, if the futuristic ideas of technology researchers come true.
Shimmering ferroelectric domains
Ferroelectric materials are named after ferromagnetic ones because they behave in a similar way. The main difference: these materials are not magnetic, but permanently electrically polarized. They have great importance for data storage technology and novel piezoelectric devices. Dresden scientists were able to produce microscopic images of ferroelectric domains - tiny regions of a ferroelectric material -, where the electric polarization points into different directions. These results were published in the journal Physical Review Letters recently.
Students who use 'clickers' score better on physics tests
Hand-held electronic devices called clickers are helping college students learn physics, according to a series of research studies.
For Toy-Like NASA Robots in Arctic, Ice Research Is Child's Play
Several snowmobiles navigated speedily over arctic ice and snow in Alaska's outback in late June. This scene might seem ordinary except that the recently unveiled snowmobiles are unmanned, autonomous, toy-size robots called SnoMotes – the first prototype network of their kind envisioned to rove treacherous areas of the Arctic and Antarctic capturing more accurate measurements that will help scientists better understand what is causing the well-documented melting of ice in those regions.
IMEC reports major progress in EUV
IMEC reports functional 0.186µm2 32nm SRAM cells made with FinFETs from which the contact layer was successfully printed using ASML’s full field extreme ultraviolet (EUV) Alpha Demo Tool (ADT). Applied Materials, using its most advanced deposition systems, was key to fabricating the ultra-small circuit structures. IMEC also completed the integration and site acceptance test of the EUV ADT in its 300mm clean room.
Transparent Semiconductors May Be Future of Flat Panel Display Industry
Some types of “amorphous oxide” transparent semiconductors originally developed in the College of Engineering at Oregon State University may form the basis for the next generation of flat panel displays, providing better performance at a lower cost.
Summer Storms Could Mean More Dead Zones
(PhysOrg.com) -- It's summertime and people are flocking to the coasts around the country. But when summer storms arrive, it's not only beach-goers who are affected; the rains can also have an impact on living creatures far below the ocean surface.
A Telescope Made of Moondust
A gigantic telescope on the Moon has been a dream of astronomers since the dawn of the space age. A lunar telescope the same size as Hubble (2.4 meters across) would be a major astronomical research tool. One as big as the largest telescope on Earth—10.4 meters across—would see far more than any Earth-based telescope because the Moon has no atmosphere. But why stop there? In the Moon's weak gravity, it might be possible to build a telescope with a mirror as large as 50 meters across, half the length of a football field—big enough to analyze the chemistry on planets around other stars for signs of life.

News discussion:

Physics news

[Home]   [Full version]