Memory Modules Provide Unparalleled Speed and Density Compared to Existing Registered DIMMs
Elpida Memory, Inc., Japan's leading global supplier of Dynamic Random Access Memory (DRAM), today announced that it has shipped samples of its Fully-Buffered Dual in-line Memory Modules (FB-DIMM) that provide advanced performance for next-generation servers. The industry standard specification is complete and will be confirmed by JEDEC (Joint Electron Device Engineering Counsel). FB-DIMMs have been designed to provide significant performance gains over current Registered DIMM solutions, and they will offer unprecedented speeds up to 4.8 Gigabits per second (Gbps) data rate, equivalent to 6.4 Gigabytes per second (GB/s) data bandwidth. Existing DDR2 Registered DIMMs offer only 3.2 Gigabytes per second.
Next-generation servers require significant performance boosts that cannot be achieved with current Registered DIMM solutions," said Jun Kitano, director of Technical Marketing for Elpida Memory (USA). "The emergence of the FB-DIMM, with its ability to increase the number DIMMs per channel while maintaining high-speed operation, will help to eliminate memory bottlenecks that limit overall server performance. Elpida's FB-DIMM is an initial step toward enabling improved memory technology for future server platforms."
FB-DIMMs vs. Registered DIMMs
Elpida's FB-DIMM utilizes JEDEC-standard DDR2 SDRAM. However, the module design is completely new. In the new FB-DIMM, all signals - clock, address, command and data - to and from the DRAM on the module are buffered at the high-speed Advanced Memory Buffer (AMB) chip located on the DIMM. This helps to secure the DRAM timing margins during high-speed operation with a much shorter signal path between the DRAM and the AMB.
The FB-DIMM also adopts a Point-to-Point connection on the bus between the memory controller and the DIMM, as well as between the DIMMs themselves. This allows increased bus speed with a shorter connection path. It also greatly improves the maximum number of DIMMs that can be loaded on the bus - up to eight 2-rank DIMMs - with less concern about signal degradation.
By comparison, existing standard Registered DIMMs have a stub-bus architecture along the memory bus between each DIMM and the memory controller. As the memory frequency increases, the controller must reduce the number of DIMMs loaded on the memory bus to secure the signal quality and the timing margin along the lengthy signal path between the DRAM devices on the module and the controller on the motherboard. Therefore, Registered DIMMs that provide 3.2 GB/s bandwidth (PC2-3200 / DDR2-400) are limited to four 1-rank DIMMs, or two 2-rank DIMMs. This limitation has presented a bottleneck in achieving improved performance in server applications where both high-speed and high-capacity are essential.
As processor speeds continue to increase, and as the server architecture changes, FB-DIMMs will be required to support next-generation server platforms.
Preliminary Samples are for Testing Only
The initial samples shipped by Elpida are currently being used to test next-generation server platforms. Elpida Memory plans to offer FB-DIMM products in 2 Gigabyte, 1 Gigabyte and 512 Megabyte densities. The availability of engineering samples and volume production will likely begin during the second half of 2005, pending the availability of FB-DIMM-compliant memory controllers from third parties and the ratification of the JEDEC standard.
Related stories:
Intel Unleashes New Server Processors
Intel Corporation today introduced its dual-core Intel Xeon Processor 5100 series, previously codenamed “Woodcrest,” for the high-volume server, workstation, communications, storage and embedded market segments.
Elpida Intros New 1 Gigabit DDR2 SDRAMs
Elpida Memory today announced the availability of its second-generation 1 Gigabit DDR2 SDRAMs and six memory modules based on the new devices.
Elpida Memory Ships Samples of 2 Gigabit DDR2 SDRAM using 80 nm Process Technology
Elpida Memory, Japan's leading global supplier of Dynamic Random Access Memory (DRAM), today announced the shipment of 80 nm-based 2 Gigabit DDR2 SDRAM samples. These samples are among the first 80 nm-based devices in the world to be shipped for customer evaluation, and the devices are expected to be used first in high-density memory modules for high performance servers.
Samsung Offers 8GB FB-DIMM for Servers
Samsung Electronics today announced a new 8GB server memory offering. Following the introduction of its 8GB Registered Dual In-line Memory Module (R-DIMM) in October, Samsung has now increased the density of its Fully Buffered Dual In-line Memory Module product line-up (FB-DIMM) to include 8GBs by adopting 80 nanometer 2Gb DDR for high-speed servers. This represents a significant leap forward in advanced server memory architecture.
Micron Demonstrates Industry's First 4 Gigabyte FBDIMM
Micron Technology, Inc extended its leadership in fully buffered dual in-line memory module (FBDIMM) solutions as the first supplier to demonstrate 4 gigabyte (GB) density FBDIMMs. These FBDIMMs, using 1 gigabit (Gb) DDR2-533 components, allow server platforms to realize the maximum available capacities of system memory for outstanding performance and reliability. Micron remains the industry’s top FBDIMM memory supplier with a complete line of modules with densities from 256MB to 4GB and speed grades extending to PC2-5300.
Elpida's 512 Megabyte DDR2 SO-DIMMs Offer Low-Power Operation, Improved Thermal Performance for Notebooks
Elpida Memory, Inc., Japan's leading global supplier of Dynamic Random Access Memory (DRAM), today announced its 512 Megabyte DDR2 Small-Outline Dual In-line Memory Modules (SO-DIMMs). The modules utilize next-generation 512 Megabit DDR2 SDRAM devices that realize a 30% reduction in IDD0 current (155mA to 110mA) compared to previous generation devices to achieve lower-power operation, improved thermal performance and extended battery life in portable applications including notebooks.
Infineon Announces High-Speed and High-Density DDR2 Memory Modules for High-Performance Computing Products
Infineon Technologies AG today announced new high-speed DDR2 modules for high-end desktops and servers:
-- Selected as Preferred Supplier by Asus for DDR2-800 unbuffered DIMMs
-- Customized 8GB (Gigabyte) DDR2-400 Tall registered DIMMs based on dual-die technology
Elpida's 4 Gigabyte DDR2 Registered DIMMs Offer Highest Density and Performance
Elpida Memory, Inc., Japan's leading global supplier of Dynamic Random Access Memory (DRAM), today announced the availability of 4 Gigabyte DDR2 Registered Dual In-Line Memory Modules (DIMMs) that offer high-density and high-performance benefits for server applications. Elpida's new modules can deliver up to 32 Gigabytes of memory in an eight slot server platform, with system data transfer rates up to 8.4 Gigabytes per second (GB/sec). They also utilize Elpida's unique stacked FBGA (sFBGA) technology to achieve a thinner module-about 30 percent thinner than the current JEDEC standard. The module thinness helps increase air flow between DIMMs and improves thermal performance in server systems.
