MRAM is expected to be the dominant next-generation memory technology as it realizes ultra fast operation speeds, nonvolatility - ability to retain data with the power off, and unlimited write endurance. Verification at the SRAM speed level proves that the newly-developed MRAM could be embedded in system LSIs as SRAM substitutes in the future.
The unique MRAM was designed and fabricated by NEC and has a memory capacity of 1 megabit. Incorporating a memory cell with two transistors, one magnetic tunnel junction, and a newly-developed circuit scheme, the new design achieves an operation speed of 250MHz; double that of conventional MRAMs and almost equivalent to that of recent LSI-embedded SRAM. Tests carried out using an internal signal-monitoring circuit demonstrated data output time of 3.7 nanoseconds from a 250MHz clock edge.
MRAM are expected to generate new value and applications for future electronic devices thanks to their nonvolatility, unlimited write endurance, high speed operation, and ability to cut memory power dissipation in half. For example, these features could enable instant start up of PCs and prevent drive recorders from losing data after a sudden break in power in the future. As substitutes for system LSI-embedded SRAM, MRAM can provide even more value as they are expected to enable extremely low power dissipation of system LSIs because they can sleep when they are not in use and wake up instantly.
NEC has been actively carrying out MRAM research since 2000, and has succeeded in the development of many groundbreaking technologies, such as MRAM cell technology suitable for embedding in next generation system LSIs, in recent years. These efforts have culminated in the successful demonstration of SRAM-compatible MRAM, which open the door to realization of extremely low power system LSIs. NEC will continue to design and fabricate MRAM toward realization of an MRAM-embedded system LSI to achieve high performance, next generation system LSIs.
NEC's research is partially supported by the New Energy and Industrial Technology Development Organization's MRAM technology development project for realization of high-speed and non-volatile memory embedded in system LSIs.
Source: NEC
Related stories:
Toshiba and NEC Develop World's Fastest, Highest Density MRAM
Toshiba Corporation and NEC Corporation today announced that they have developed a magnetoresistive random access memory (MRAM) that combines the highest density with the fastest read and write speed yet achieved. The new MRAM achieves a 16-megabit density and a read and write speed of 200-megabytes a second, and also secures low voltage operation of 1.8V.
Renesas, Grandis to Collaborate on Development of 65 nm MRAM Employing Spin Torque Transfer
Renesas Technology and Grandis, Inc. have agreed to collaborate on the development of 65 nm process MRAM (Magnetic Random Access Memory) employing spin torque transfer writing technology. Renesas Technology will start to ship microcomputers and SoC products incorporating 65 nm process STT-RAMTM in the near future.
IBM, Stanford Collaborate on World-Class Spintronics Research
SAN JOSE, Calif. -- April 26, 2004 -- IBM and Stanford University are joining forces on the advanced research and creation of new high-performance, low-power electronics in the emerging field of nanotechnology called "spintronics." To formalize the effort, scientists at IBM's Almaden Research Center and Stanford University today announced the formation of the IBM-Stanford Spintronic Science and Applications Center (SpinAps, for short).
New Speed Record for Magnetic Memories
(PhysOrg.com) -- An experiment carried out at the Physikalisch-Technische Bundesanstalt (PTB) has realized spin torque switching of a nanomagnet as fast as the fundamental speed limit allows. Using this so-called ballistic switching future non-volatile magnetic memories could operate as fast as the fastest non-volatile memories. The experiments are described in the next issue of
Physical Review Letters (22 August, 2008).
Remembering the future
As electronics designers cram more and more components onto each chip, current technologies for making random-access memory (RAM) are running out of room. European researchers have a strong position in a new technology known as resistive RAM (RRAM) that could soon be replacing flash RAM in USB drives and other portable gadgets.
Toshiba develops new MRAM device which opens the way to giga-bits capacity
Toshiba Corporation today announced important breakthroughs in key technologies for magnetoresistive random access memory (MRAM), a promising, next-generation semiconductor memory device.
Magnetic Computer Sensors May Help Study Biomolecules
Magnetic switches like those in computers also might be used to manipulate individual strands of DNA for high-speed applications such as gene sequencing, experiments at the National Institute of Standards and Technology suggest.
Magnetic memory design breakthrough can lead to faster computers
Imagine a computer that doesn't lose data even in a sudden power outage, or a coin-sized hard drive that could store 100 or more movies. Magnetic random-access memory, or MRAM, could make these possible, and would also offer numerous other advantages. It would, for instance, operate at much faster than the speed of ordinary memory but consume 99 percent less energy.
