MRAM is expected to be the dominant next-generation memory technology as it realizes ultra fast operation speeds, nonvolatility - ability to retain data with the power off, and unlimited write endurance. Verification at the SRAM speed level proves that the newly-developed MRAM could be embedded in system LSIs as SRAM substitutes in the future.
The unique MRAM was designed and fabricated by NEC and has a memory capacity of 1 megabit. Incorporating a memory cell with two transistors, one magnetic tunnel junction, and a newly-developed circuit scheme, the new design achieves an operation speed of 250MHz; double that of conventional MRAMs and almost equivalent to that of recent LSI-embedded SRAM. Tests carried out using an internal signal-monitoring circuit demonstrated data output time of 3.7 nanoseconds from a 250MHz clock edge.
MRAM are expected to generate new value and applications for future electronic devices thanks to their nonvolatility, unlimited write endurance, high speed operation, and ability to cut memory power dissipation in half. For example, these features could enable instant start up of PCs and prevent drive recorders from losing data after a sudden break in power in the future. As substitutes for system LSI-embedded SRAM, MRAM can provide even more value as they are expected to enable extremely low power dissipation of system LSIs because they can sleep when they are not in use and wake up instantly.
NEC has been actively carrying out MRAM research since 2000, and has succeeded in the development of many groundbreaking technologies, such as MRAM cell technology suitable for embedding in next generation system LSIs, in recent years. These efforts have culminated in the successful demonstration of SRAM-compatible MRAM, which open the door to realization of extremely low power system LSIs. NEC will continue to design and fabricate MRAM toward realization of an MRAM-embedded system LSI to achieve high performance, next generation system LSIs.
NEC's research is partially supported by the New Energy and Industrial Technology Development Organization's MRAM technology development project for realization of high-speed and non-volatile memory embedded in system LSIs.
Source: NEC
Related stories:
Graphene Holds Promise for Spintronics
Graphene is a nanomaterial which combines a very simple atomic structure with intriguingly complex and largely unexplored physics. Since its first isolation about four years ago, researchers suggest a large number of applications for this material in anticipation of future technological innovations. Specifically, graphene is considered as a potential candidate for replacing silicon in future electronic devices.
Magnetic Computer Sensors May Help Study Biomolecules
Magnetic switches like those in computers also might be used to manipulate individual strands of DNA for high-speed applications such as gene sequencing, experiments at the National Institute of Standards and Technology suggest.
Breakthrough in magnetic devices could make computers much more powerful
Scientists have created novel ‘spintronic’ devices that could point the way for the next generation of more powerful and permanent data storage chips in computers. Physicist at the Universities of Bath, Bristol and Leeds have discovered a way to precisely control the pattern of magnetic fields in thin magnetic films, which can be used to store information.
New nanotech process could increase computer memory
A team of scientists from the Department of Physics at the Universitat Autònoma de Barcelona, in collaboration with colleagues from the Argonne National Laboratory (USA) and the Spintec laboratory (Grenoble, France), has for the first time produced microscopic magnetic states, known as “displaced vortex states”, that will allow an increase in the size of MRAMs (which are not deleted when the computer is switched off). The research has been published in
Physical Review Letters and
Applied Physics Letters.
Toshiba and NEC Develop World's Fastest, Highest Density MRAM
Toshiba Corporation and NEC Corporation today announced that they have developed a magnetoresistive random access memory (MRAM) that combines the highest density with the fastest read and write speed yet achieved. The new MRAM achieves a 16-megabit density and a read and write speed of 200-megabytes a second, and also secures low voltage operation of 1.8V.
Magnetic memory design breakthrough can lead to faster computers
Imagine a computer that doesn't lose data even in a sudden power outage, or a coin-sized hard drive that could store 100 or more movies. Magnetic random-access memory, or MRAM, could make these possible, and would also offer numerous other advantages. It would, for instance, operate at much faster than the speed of ordinary memory but consume 99 percent less energy.
Renesas, Grandis to Collaborate on Development of 65 nm MRAM Employing Spin Torque Transfer
Renesas Technology and Grandis, Inc. have agreed to collaborate on the development of 65 nm process MRAM (Magnetic Random Access Memory) employing spin torque transfer writing technology. Renesas Technology will start to ship microcomputers and SoC products incorporating 65 nm process STT-RAMTM in the near future.
Toshiba and NEC Develop Key Technologies for High-Density MRAM
Toshiba Corporation and NEC Corporation today announced two key advancements toward development of a magnetoresistive random access memory, a technology seen as key to the development of future generations of high performance mobile equipment. Unveiling the latest fruits of a joint development program dating back to 2002, the two companies announced a new cell design that halves power consumption during data writes and cuts writing errors, and a novel MRAM architecture with high speed characteristics and a performance that will support development of high-density devices.
