Plumbing Carbon Nanotubes

Scientists have determined how to connect carbon nanotubes together like water pipes, a feat that may lead to a whole new group of bottom-up-engineered nanostructures and devices.

The researchers, from Japan's National Institute of Advanced Industrial Science and Technology, were able to “plumb” together nanotubes with similar or equal diameters using a technique they developed. They expect that their method could be used in the future to seamlessly join carbon nanotubes regardless of their diameters.

“Our method could allow longer carbon nanotubes to be created, and even nanotubes with multiple branches,” the study's corresponding scientist, Chuanhong Jin, said to PhysOrg.com. “Such structures could have many applications, such as field-effect transistors or current lead-wires.”

The work is described in a paper in Nature Nanotechnology.

Working through the eyes of a transmission electron microscope, which allowed them to watch the process as it occurred, Jin and his colleagues first split a single carbon nanotube by bridging it across two electrodes and applying a high current. This caused the middle section of the nanotube to become gradually narrower until it eventually split, resulting in two nanotubes with equal diameters and closed, or capped, ends.

The capped ends were moved near each other and the voltage across the electrodes was slowly raised from zero. At certain threshold values of voltage and current, the two nanotubes suddenly joined again. This process was so quick that Jin and his colleagues are as yet unsure of how it occurs.

The researchers found that they could repeat this split/join process on the same nanotube several times; so far, up to seven times.

The group also attempted to join carbon nanotubes with different diameters, but were not successful. In each case, at a certain threshold of voltage and current, an obvious deformation occurred on the cap of the larger nanotube. The nanotubes would then detach, pulling away from each other, and the cap structures of both nanotubes seemed to change, causing a shrinkage in length. Attempts to reposition and attach the nanotubes produced the same results.

“It seems intrinsically difficult to join two carbon nanotubes with entirely different diameters,” says Jin.

The difficulties seem to arise from the nanotubes' “chiralities”—whether the carbon atoms are bonded in chains that run straight down the tube or chains that twist around it. Two nanotubes made from the same mother tube have the same chirality, but nanotubes with different diameters rarely do. This mismatch caused problems at the atomic level when the scientists attempted to force the tubes to merge.

But the scientists came up with a fix: inserting tungsten atoms between the two nanotubes to catalyze the joining process. Tungsten has long been known to help carbon atoms “graphitize,” or arrange themselves into ordered structures, as are found in one crystal form of carbon, graphite. By moving the particle back and forth during the annealing process, the nanotubes joined seamlessly.

Citation: Chuanhong Jin, Kazu Suenaga, and Sumio Iijima Nature Nanotechnology advance online publication, 9 December 2007 (doi:10.1038/nnano.2007.406)

Copyright 2007 PhysOrg.com.
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part without the express written permission of PhysOrg.com.

Related stories:

Warming up for Magnetic Resonance Imaging
Standard magnetic resonance imaging, MRI, is a superb diagnostic tool but one that suffers from low sensitivity, requiring patients to remain motionless for long periods of time inside noisy, claustrophobic machines. A promising new MRI method, much faster, more selective — able to distinguish even among specific target molecules — and many thousands of times more sensitive, has now been developed in the laboratory by researchers at the Department of Energy's Lawrence Berkeley National Laboratory and the University of California at Berkeley.
Sandia researcher examines the physics of carbon nanotubes
Carbon nanotubes, described as the reigning celebrity of the advanced materials world, are all the rage. Recently researchers at Rice University and Rensselaer Polytechnic Institute used them to make the “blackest black” — the darkest known material, reflecting only 0.045 percent of all light shined on it.
Nanotubes grown straight in large numbers
Duke University chemists have found a way to grow long, straight cylinders only a few atoms thick in very large numbers, removing a major roadblock in the pursuit of nano-scale electronics.
Carbon Nanotube Measurements: Latest in NIST 'How-To' Series
The National Institute of Standards and Technology, in collaboration with the National Aeronautics and Space Administration, has published detailed guidelines for making essential measurements on samples of single-walled carbon nanotubes (SWCNTs). The new guide constitutes the current “best practices” for characterizing one of the most promising and heavily studied of the new generation of nanoscale materials.
Making sure the wonder materials don't become the wonder pollutant
Carbon nanotubes are 10,000 times thinner than a human hair, yet stronger than steel and more durable than diamonds. They conduct heat and electricity with efficiency that rivals copper wires and silicon chips, with possible uses in everything from concrete and clothes to bicycle parts and electronics. The have been hailed as the next “wonder material” for what could become a multi-billion dollar manufacturing industry in the 21st century.
Carbon Nanotubes Help Fix Bones
Healing a broken bone is a lengthy and awkward process. The current, most effective way to repair bone tissue is to ensure correct positioning of the bone during healing, usually by use of a plaster cast or splint. With the average time to repair bone fractures being around six weeks this is a slow process and one that can often be uncomfortable for the patient.
Physicists discover how fundamental particles lose track of quantum mechanical properties
In today’s Science Express, the advance online publication of the journal Science, researchers report a series of experiments that mark an important step toward understanding a longstanding fundamental physics problem of quantum mechanics. The scientists presented their findings at the annual meeting of the American Physical Society this week.
NASA MidSTAR-1 successful technologies may be revolutionary
Two new technologies launched onboard a U.S. Naval Academy satellite called MidSTAR-1 have proven successful in their tests in space. One technology is a sensor that can check for harmful chemicals and the other is a special "film" that can control heat.

News discussion:

Nanotechnology news