Nanothinx: High-Purity and Low-Cost Production of Multi-Wall and Single-Wall Carbon Nanotubes

Nanothinx is a young spin off company, which focuses on the high-purity and low-cost production of multi-wall (MWNT) and single-wall nanotubes (SWNT) as well as on some of their uses. The company has spun-off from the Institute of Chemical Engineering and High Temperature Chemical Processes (ICE-HT) situated in Patras, one of the seven Institutes of the Foundation for Research and Technology Hellas (FORTH), which is one of the most important research establishments in Greece.

The production methods used by Nanothinx are based on the synthesis of carbon nanotubes with catalytic chemical vapour deposition (CCVD or CVD) from hydrocarbon feeds. The advantages of Nanothinx technology are:
1. Development of carbon nanotubes at low cost. One of the principal characteristics that accounts for the low cost of the products is the low cost of the novel catalysts that have been developed by Nanothinx scientists.
2. Higher purity of the as-prepared carbon nanotubes than that of the commercially available carbon nanotubes.
3. Minimal levels of impurities (e.g., amorphous carbon) that degrade CNTs properties.
4. High MWNTs and SWNTs production rates.

The pilot unit currently used is dedicated to the production of multi-wall and single-wall carbon nanotubes. In parallel, work is being carried out for the scaling up of the production methodologies to enable the production of commercial quantities according to the products applications in the industrial market. Nanothinx is in a position to supply potential clients with high-purity (97% as prepared) multi-wall nanotubes in quantities ranging from grams to several hundreds of grams, and single-wall nanotubes with high purity (70% as prepared) at quantities ranging from milligrams to tens of grams.

In addition to nanotubes, Nanothinx also offers R&D services on the process engineering of systems in which nanotubes and other nanomaterials are produced or employed. Representative research projects are:
1) Surface modification and tailoring of the chemical functionality of carbon nanotubes towards polymer matrix structures; Study of the nanotubes distribution and dispersion capability and determination of the nanocomposites tensile strength and nanotubes orientation.
2) Development and characterization of CCVD nanostructured materials based on aluminium oxide and carbon.

The spin-off is open to joint business and joint R&D activities related to nanostructured materials in which nanotubes are one of their constituent components, such as composite materials.

Nanotubes are seen as the “building blocks” of the future. Their high electrical conductivity, excellent mechanical strength and high thermal conductivity render carbon nanotubes (CNTs) ideal materials for a variety of industrial applications, such as automotive, gas (e.g., hydrogen) storage, fuel cells, microelectronics, biosensors and chemical sensors, polymer and ceramic reinforcement etc.

Related stories:

Hydrogen generation without the carbon footprint
A greener, less expensive method to produce hydrogen for fuel may eventually be possible with the help of water, solar energy and nanotube diodes that use the entire spectrum of the sun's energy, according to Penn State researchers.
Novel memory device is set to rival transistor-switched silicon-based memory
Working with an international group of researchers, Professor Gehan Amaratunga has produced a novel memory device which is set to rival transistor-switched silicon-based memory.
Brightest X-ray Vision at the Nano-scale
Technology-development studies at Cornell University and Jefferson Laboratory are showing how to use the brightest X-ray light ever generated for the scientific examination of everything from human proteins to forged art.
How buckyballs hurt cells
A new study into the potential health hazards of the revolutionary nano-sized particles known as ‘buckyballs’ predicts that the molecules are easily absorbed into animal cells, providing a possible explanation for how the molecules could be toxic to humans and other organisms.
Researchers Develop Revolutionary Technology for Nanoscale Assembly at Wafer Level
Researchers at the NSF Nanoscale Science and Engineering Center for High-rate Nanomanufacturing (CHN) at Northeastern University, with partners UMass Lowell and University of New Hampshire, have discovered an innovative technology that will have a tremendous impact on the nanotechnology industry.
Chemists measure chilli sauce hotness with nanotubes
Oxford chemists have found a way of using carbon nanotubes to judge the heat of chilli sauces. The technology might soon be available commercially as a cheap, disposable sensor for use in the food industry.
Nanotube production leaps from sooty mess in test tube to ready formed chemical microsensors
Carbon nanotubes’ potential as a super material is blighted by the fact that when first made they often take the form of an unprepossessing pile of sooty black mess in the bottom of a test tube. Now researchers in the University of Warwick’s Department of Chemistry have found a way of producing carbon nanotubes in which they instantly form a highly sensitive ready made electric circuit.
Carbon Nanotube Measurements: Latest in NIST 'How-To' Series
The National Institute of Standards and Technology, in collaboration with the National Aeronautics and Space Administration, has published detailed guidelines for making essential measurements on samples of single-walled carbon nanotubes (SWCNTs). The new guide constitutes the current “best practices” for characterizing one of the most promising and heavily studied of the new generation of nanoscale materials.

News discussion:

Nanotechnology news