Nanotubes grown straight in large numbers

Duke University chemists have found a way to grow long, straight cylinders only a few atoms thick in very large numbers, removing a major roadblock in the pursuit of nano-scale electronics.

These single-walled carbon nanotubes also follow parallel paths as they grow so they don't cross each other to potentially impede electronic performance, said Duke associate chemistry professor Jie Liu, who leads the research. Carbon nanotubes can act as semiconductors and could thus further scale-down circuitry to features measuring only billionths of a meter.

Liu's team directed swarms of nanotubes to extend in the same direction by using the crystal structure of a quartz surface as a template. The availability of forests of identical nanotubes would allow future nanoengineers to bundle them onto multiple ultra-tiny chips that could operate with enough power and speed for nanoprocessing.

"It's quite an exciting development," said Liu, who has received a patent on the process. "Compared with what other people have done, we have reached a higher density of nanotubes. Wherever you look through the microscope there are nanotubes. And they are much better aligned and grow very straight."

Liu and two coauthors, postdoctoral fellow Lei Ding and graduate student Dongning Yuan, described their accomplishment April 16 in the Journal of the American Chemical Society (JACS). Ding was the study's first author. Their research was funded by the United States Naval Research Laboratory and by Duke.

Nanotubes have been a focus of research since the 1990s because of their exceptional lightness and strength and their potential to function in a new kind of electronics as either semiconductors or metals -- depending on their individual architectures.

Sized so small they can be viewed only with scanning electron or atomic force microscopes, carbon nanotubes could usher the electronics industry into an even-smaller scale of miniaturization if researchers can leap some fabrication barriers.

"This would break a logjam for reproducing enough of them in identical form to build into working devices," Liu said of his group's new innovation. "With our technique, their densities are high enough over a large area. And every device would be quite the same, even if thousands or a million of them were made," Liu said.

Researchers have for some time been able to coax nanotubes into growing and extending themselves when primed by a catalyst and provided with a continuous source of carbon delivered in a gas.

But, until now, they have been unable to make them grow straight, long and dense enough in a large enough area to be practical for carrying current on the surfaces of semiconducting wafers, Liu said.

Researchers have also been struggling to control growing nanotubes' tendencies to bend and overlap each other as they extend. Such overlaps would impede a future nanocircuit's performance at high operating speeds, he added.

In 2000, a Liu-led research team at Duke became the first to make long and aligned nanotubes grow on surfaces, though not in a sufficiently parallel and straight way, he said. He has also vied with other groups in growing nanotubes to record lengths.

Recently, other scientific groups developed a way to grow perfectly aligned nanotubes along continuous-and-unbroken "single crystal" surfaces of quartz or sapphire.

One team using that method reported making as many as 10 nanotubes grow within the space of a single micron -- one millionth of a meter -- using iron as a catalyst. They also observed areas with nanotubes as dense as 50 per micron. But such numbers at that density are still "low and not uniform enough for many useful electronic applications," Liu said.

In the new JACS report, Liu's group reports improving on that performance by modifying the method.

Using copper as their growth catalyst and gasified alcohol to supply carbon, the Duke researchers found that their nanotubes all extended in the same direction, following parallel paths determined by the crystalline orientation of "stable temperature" (ST)-cut quartz wafers used in electronic applications. "They're like a trains running on tracks that are all very straight," Liu said.

By applying computer chip fabrication-style masks to confine uniform coatings of catalyst within very narrow lines along those crystal orientations, Liu's group was able to keep an unprecedented number of nanotubes growing in parallel, without crossing paths.

"To the best of our knowledge, it is the highest density of aligned, single-wall nanotubes reported," the researchers wrote in JACS.

Once formed on ST-cut quartz, the aligned swarms of nanotubes can be transferred onto the less-expensive semiconductor wafers normally used in computer chips, Liu said. He and collaborators are now exhaustively testing their nanotubes to see how many have the right architectures to serve as semiconductors.

Source: Duke University

Related stories:

The original nano workout -- Helping carbon nanotubes get into shape
Researchers at Rensselaer Polytechnic Institute have developed a new method of compacting carbon nanotubes into dense bundles. These tightly packed bundles are efficient conductors and could one day replace copper as the primary interconnects used on computer chips and even hasten the transition to next-generation 3-D stacked chips.
Duke Chemist's Lab Steady Source of 'Nanotube' Advances
"Nanotubes" grown in the busy laboratory of associate chemistry professor Jie Liu were crucial to IBM scientists' recent announcements of a new source of light emissions. Liu's lab is also working with a California firm to pioneer use of these infinitesimally-thin carbon tubes in place of copper contacts for computer chips.
Sapphire Stars in Nanotube Support Role
On crystal surfaces, nanotubes self-guide themselves into dense structures with exciting potential applications as sensors or integrated circuits

USC researchers have found that sapphire surfaces spontaneously arrange carbon nanotubes into useful patterns - but only the right surfaces.
Nanotubes are one-atom thick sheets of carbon rolled into seamless cylinders. They can be used to work as chemical sensors and transistors, like devices made from carbon's close chemical cousin, silicon.
Engineers show nanotube circuits can be made en masse
Most innovations don't go far unless there is a way to turn them into products that are manufacturable on a mass scale. That's why new research on carbon nanotubes, presented June 19 by a group of Stanford electrical engineers, is likely to draw industry attention.
Nanoparticles aid bone growth
In the first study of its kind, bioengineers and bioscientists at Rice University and Radboud University in Nijmegen, Netherlands, have shown they can grow denser bone tissue by sprinkling stick-like nanoparticles throughout the porous material used to pattern the bone.
Researchers work toward ending cartilage loss
Scientists have long wrestled with how to aid those who suffer cartilage damage and loss. One popular way is to inject an artificial gel that can imitate cartilage's natural ability to act as the body's shock absorber. But that solution is temporary, requiring follow-up injections.
Nanowires may boost solar cell efficiency, engineers say
University of California, San Diego electrical engineers have created experimental solar cells spiked with nanowires that could lead to highly efficient thin-film solar cells of the future.
Carbon Nanotubes Help Fix Bones
Healing a broken bone is a lengthy and awkward process. The current, most effective way to repair bone tissue is to ensure correct positioning of the bone during healing, usually by use of a plaster cast or splint. With the average time to repair bone fractures being around six weeks this is a slow process and one that can often be uncomfortable for the patient.

News discussion:

Nanotechnology news